Please take a look into etc/complete.ini for new neighbor options for gk 2.2. You will probably need to set ForwardResponse=1 in order to get LCF travelling back using its original path. ----- Original Message ----- From: "Bruce Ferrell" <bferrell@baywinds.org> Sent: Friday, January 09, 2004 5:58 AM > I have an interoperation problem with a pair of gnugk instances. > > One is version 1.0 and not under my control. The other is version 2.2.3 > configured in proxy/gatekeeper mode with cisco compatibility on. > > When I place a call from an endpoint registered to the v2 GK, the LRQ is > passed to the version 1 gatekeeper, seemingly cortrectly. the ACF > returned seems to be bypassing the v2 GK, being sent directly to the > endpoint vs being sent via the v2 GK. > > The end result is that the endpoint isn't able to correctly route rtp > and I get a no audio call. > > The config works against a Cisco gatekeeper. > > Am I missing something in my config? ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
