On Saturday 03 January 2004 11:22, Zygmuntowicz Michal wrote:
> More details on the problem?
> Tip: If you wish to build sophisticated multivendor neighbor
> gk hierarchies, you would want to use gk 2.2.
>
environmant is gnugk 2.2.3 from dec 12 CVS. incomming GK is sysmaster ( this
appears to be modified 2.0.3 gnugk) to my gnugk, sending call to cisco GK
neignbor. i have both defined as neighbors with only prefix defined for
termination cisco GK.
this is my neighbor section in ini file xxx are my manual deletion of
destination ips
[RasSrv::Neighbors]
gk1. cisco=200.xxx.xxx.xx;0201,0202,0203,0204,0205,0206,020201
VoiceMaster=69.xxx.xxx.xxx
[RasSrv::LRQFeatures]
#NeighborTimeout=3
ForwardHopCount=5
AlwaysForwardLRQ=1
AcceptForwardedLRQ=1
IncludeDestinationInfoInLCF=1
CiscoGKCompatible=1
ok. this snip of debug trace
2004/01/05 16:34:40.679 4 RasSrv.cxx(175) RAS Receiving on
69.44.113.
150:1719(U)
2004/01/05 16:34:40.680 2 RasSrv.cxx(144) RAS Read from
69.44.113.141
:1719
2004/01/05 16:34:40.680 3 RasSrv.cxx(183) RAS
locationRequest {
requestSeqNum = 21
destinationInfo = 1 entries {
[0]=dialedDigits "0201#011xxxxxxxx"
}
nonStandardData = {
nonStandardIdentifier = h221NonStandard {
t35CountryCode = 181
t35Extension = 0
manufacturerCode = 18
}
data = 13 octets {
56 6f 69 63 65 4d 61 73 74 65 72 47 4b VoiceMasterGK
}
}
replyAddress = ipAddress {
ip = 4 octets {
45 2c 71 8d E,q.
}
port = 1719
}
sourceInfo = 1 entries {
[0]=h323_ID 11 characters {
0056 006f 0069 0063 0065 004d 0061 0073 VoiceMas
0074 0065 0072 ter
}
}
canMapAlias = TRUE
}
2004/01/05 16:34:40.680 5 job.cxx(101) Job Run LRQ at
thread 6319
2004/01/05 16:34:40.680 1 RasSrv.cxx(302) RAS LRQ Received
2004/01/05 16:34:40.681 4 gkauth.h(113) GkAuth default check
ok
2004/01/05 16:34:40.681 5 Routing.h(117) ROUTING Checking
policy Explici
t for the request LRQ 21
2004/01/05 16:34:40.681 5 Routing.h(117) ROUTING Checking
policy Interna
l for the request LRQ 21
2004/01/05 16:34:40.681 5 Routing.h(117) ROUTING Checking
policy Neighbo
r for the request LRQ 21
2004/01/05 16:34:40.682 3 RasSrv.cxx(195) RAS Send to
200.52.12.42:17
19
locationRequest {
requestSeqNum = 21
destinationInfo = 1 entries {
[0]=dialedDigits "0201#011xxxxxxxxx"
}
nonStandardData = {
nonStandardIdentifier = h221NonStandard {
t35CountryCode = 181
t35Extension = 0
manufacturerCode = 18
}
data = 13 octets {
56 6f 69 63 65 4d 61 73 74 65 72 47 4b VoiceMasterGK
}
}
replyAddress = ipAddress {
ip = 4 octets {
45 2c 71 8d E,q.
}
port = 1719
}
sourceInfo = 1 entries {
[0]=h323_ID 11 characters {
0056 006f 0069 0063 0065 004d 0061 0073 VoiceMas
0074 0065 0072 ter
}
}
canMapAlias = TRUE
hopCount = 2
}
2004/01/05 16:34:40.682 5 RasSrv.cxx(209) RAS Sent
Successful
2004/01/05 16:34:40.683 2 Neighbor.cxx(535) NB 1 LRQ(s) sent
2004/01/05 16:34:40.683 5 Routing.h(123) ROUTING Policy
Neighbor applied
to the request LRQ 21
2004/01/05 16:34:40.683 2 RasSrv.cxx(347) RIP|
69.xxx.xxx.xxx.xxx|VoiceMasterGK
:1|0201#011xxxxxxxxxxxxx:dialedDigits|69.xx.xxx.xxx;
THIS PART IS WHERE IT SEEMS TO FORWARD THE LRQ / LCF TO ORIGINATION GK AND
THEN HAS NO FURTHER INVOLVEMENT IN CALL. ALSO NO CDR IS GENERATED WITH THIS
SETTING. IT ALSO APPLIES ROUTING POLICY NEIGHBOR.
2004/01/05 16:34:40.683 6 yasocket.cxx(532) 127.0.0.1:33079 84
bytes sent
2004/01/05 16:34:40.683 3 RasSrv.cxx(195) RAS Send to
69.xxx.xxx.xx:1
719
requestInProgress {
requestSeqNum = 21
nonStandardData = {
nonStandardIdentifier = object (NULL)
data = 15 octets {
56 6f 69 63 65 4d 61 73 74 65 72 47 4b 3a 31 VoiceMasterGK:1
}
}
delay = 5000
}
2004/01/05 16:34:40.684 5 RasSrv.cxx(209) RAS Sent
Successful
2004/01/05 16:34:40.684 5 job.cxx(189) Job Delete LRQ
2004/01/05 16:36:31.125 5 yasocket.cxx(609) GkStatus 1 sockets
selected fro
m 1, total 1/0
2004/01/05 16:36:31.125 5 job.cxx(101) Job Run Command
debug trc 0
at thread 6319
now if i remove AlwaysForwardLRQ in config and do same call i get.
2004/01/05 16:12:51.287 5 job.cxx(101) Job Run LRQ at
thread 6319
2004/01/05 16:12:51.287 1 RasSrv.cxx(302) RAS LRQ Received
2004/01/05 16:12:51.287 4 gkauth.h(113) GkAuth default check
ok
2004/01/05 16:12:51.288 5 Routing.h(117) ROUTING Checking
policy Explicit fo
r the request LRQ 14
2004/01/05 16:12:51.288 5 Routing.h(117) ROUTING Checking
policy Internal fo
r the request LRQ 14
2004/01/05 16:12:51.288 5 Routing.h(117) ROUTING Checking
policy Neighbor fo
r the request LRQ 14
2004/01/05 16:12:51.288 2 RasSrv.cxx(347) LRJ|69.xxx.xxx.xxx|
0201#011xxxxxxxxxx
567:dialedDigits|69.44.113.141|requestDenied;
2004/01/05 16:12:51.288 3 RasSrv.cxx(195) RAS Send to
69.xx.xxx.xx:1719
locationReject {
requestSeqNum = 14
rejectReason = requestDenied <<null>>
now after it does neighbor check in Routing.h it does not seem to find
neighbor and sends back LRJ.
i have to admit i have about changed every setting on gnugk trying to get call
to come in LRQ , send LRQ to neighbpr, get LCF and send LCF with routing info
to origination GK with no results.
any help is very much apperciated.
regards
ray
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
