RE: quite simple scenario question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



You should mark ISP gateway as "PermanentEndPoint" and not as "Endpoint" -
this parameter is if your GK work with parent GK...
At best read manual first :-)

Regards,
oleg

-----Original Message-----
From: openh323gk-users-admin@lists.sourceforge.net
[mailto:openh323gk-users-admin@lists.sourceforge.net] On Behalf Of Sergey
Sysoev
Sent: Saturday, January 03, 2004 12:20 AM
To: openh323gk-users@lists.sourceforge.net
Subject:  quite simple scenario question

Hello again, that's simple scenario:

  (lan  soft-endpoints)  -  (openh323gk)  - (wan) - (ISP VoIP gateway*) -
(pstn)

*  I  guess  Cisco  5300,  do  not  know  exactly  for that time, make
simulation with 2nd gnugk


217.29.80.xxx  -  client
213.183.102.xxx - (openh323gk)
217.18.136.xxx - (ISP VoIP gateway)


And a question: I have following config at (openh323gk) point

--- cut ---
[RoutedMode]
GKRouted=1
H245Routed=0
CallSignalPort=1721
CallSignalHandlerNumber=1
RemoveH245AddressOnTunneling=0
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=0
SupportNATedEndpoints=1
DropCallsByReleaseComplete=1

[Endpoint]
Gatekeeper=217.18.136.xxx
Type=Gateway
H323ID=f1
E164=217
Password=
Prefix=217
TimeToLive=900
RRQRetryInterval=10
ARQTimeout=2
UnregisterOnReload=0
NATRetryInterval=60
NATKeepaliveInterval=86400

[RasSrv::GWPrefixes]
f1=217
--- end cut ---

Registration  of gnugk at remote gw is successful and I want to divert calls
with  _only_  with  217  prefix to (ISP VoIP gateway) but gnugk diverts  all
calls anyway.. It checks for local clients firstly and if found nothing it
seems it give call to remote gateway.


Trying  to call to 213001 number from Netmeeting client 217.29.80.xxx,
gateway  for  prefix  2*  21* 213* .. is not specified so it should do local
lookup  only,  right? But it anyway divert call to remote GK in spite of
[RasSrv::GWPrefixes] only 217 for that GK


----
2004/01/03 05:05:40.020 1             RasSrv.cxx(1204)  GK      RCF Received
2004/01/03    05:05:40.020   2             GkClient.cxx(424)     GKC
Register successfully to GK 217.18.136.xxx

...
...

2004/01/03 05:08:16.991 3        ProxyThread.cxx(503)   ProxyL  Connected
from 217.29.80.x:4145
2004/01/03 05:08:17.120 3       ProxyChannel.cxx(405)   Q931s   Received:
Setup CRV=770 from 217.29.80.xxx:4145
2004/01/03 05:08:17.125 3       ProxyChannel.cxx(1016)  GK      Call 1 is
NAT type 1
2004/01/03 05:08:17.128 3       ProxyChannel.cxx(330)   GK      Call 1 proxy
enabled
2004/01/03 05:08:17.130 2        ProxyThread.cxx(701)   Proxy   Create a new
ConnectThread, total 1
2004/01/03 05:08:17.130 3        ProxyThread.cxx(647)   ProxyH(0) waiting...
2004/01/03 05:08:17.131 2             thread.cxx(28)    ProxyConnectThread
46159 started
2004/01/03 05:08:17.135 3       ProxyChannel.cxx(667)   Q931(46159) Connect
to 217.18.136.xxx:1721 successful
2004/01/03 05:08:17.182 3       ProxyChannel.cxx(405)   Q931d   Received:
Alerting CRV=770 from 217.18.136.xxx:1721
2004/01/03 05:08:17.285 3       ProxyChannel.cxx(405)   Q931d   Received:
Connect CRV=770 from 217.18.136.xxx:1721
2004/01/03 05:08:17.289 3       ProxyChannel.cxx(1574)  H245    Set
h245Address to 213.183.102.xxx:2473
2004/01/03 05:08:17.494 3       ProxyChannel.cxx(1525)  H245    Connected
from 217.29.80.xxx:4146
2004/01/03 05:08:17.499 3       ProxyChannel.cxx(1545)  H245(46159) Connect
to 217.18.136.xxx:40000 successful
2004/01/03 05:08:17.866 2             thread.cxx(28)    T120Listener 46159
started
2004/01/03 05:08:17.955 3       ProxyChannel.cxx(1816)  T120    Connect to
217.18.136.xxx:50000 successful
2004/01/03 05:08:19.021 3        ProxyThread.cxx(193)   T120
217.29.80.xxx:4147 Error(0):  (0)
2004/01/03 05:08:19.107 3       ProxyChannel.cxx(1816)  T120    Connect to
217.18.136.xxx:50000 successful
2004/01/03 05:08:20.928 3        ProxyThread.cxx(193)   T120
217.29.80.xxx:4148 Error(0):  (0)
2004/01/03 05:08:20.930 2             RasSrv.cxx(2171)  GK      Read from
217.29.80.xxx:4142
-----------------

Can anyone tell me where I am wrong? I will provide any addit. details upon
request. Thanks in advance!

--
Best regards,
 Sergey





-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/




-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux