Make sure the target port is set to 1721. Or reconfigure the gnugk to listen on port 1720. ----- Original Message ----- From: "Michael Ussery" <mussery@voiproutes.com> Sent: Thursday, December 11, 2003 5:40 PM > Has anyone been able to send a call from a Cisco as5300 Ver (Version > > 12.2(13)T) to gnugk version (Gatekeeper(GNU) Version(2.0.3) > > Ext(pthreads=1) Build(May 15 2003, 03:43:26) Sys(Linux i686 2.4.18-3) > > Large fd_set(16383) enabled) by using a session Target > > IPV4:xxx.xxx.xxx > > > > I'm able to make a call to the Gk by Registering the Cisco to the GK > > but it will not work if I am trying to send it by using session target > > IPV4: > > > > Here is the error that I get on Cisco. 29EF : 759675048hs.3767 +-1 > > +3161 pid:0 Answer > > dur 00:00:00 tx:0/0 rx:0/0 10 (normal call clearing (16)) > > Telephony 1:1:3766: tx:0/0/0ms None noise:0dBm acom:0dBm > > 29F2 : 759730849hs.3768 +-1 +1500 pid:111111 Originate > > 3019800557971881791 > > dur 00:00:00 tx:0/0 rx:0/0 66 (recovery on timer expiry (102)) > > IP XX.X.XXX.XXX:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 > > pre-ietf > > > > Here is my dial-peer > > dial-peer voice 111111 voip > > description special Test > > destination-pattern 55T > > session target ipv4:xx.x.xxx.xx > > tech-prefix 3019800 > > codec g729r8 bytes 40 > > > > > > When I try to make a call it's not even hitting the GK the IP is > > correct and I can ping the box from my GW now if I Reg the GW to the > > GK it works fine... ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/