I do not understart how do you want to configure the authentication. RadAuth and RadAliasAuth are in most cases exclusive (unless you setup different radius servers for them)! RadAuth authenticates the endpoint based on H.235 username/password and this username/password is stored at radius backend. RadAliasAuth authenticates the endpoint with a fixed password (set by a FixedPassword parameter) or with the password equal to the endpoint alias. Usually, these are different to H.235 username/password passed in ARQ,RRQ tokens, ----- Original Message ----- From: "Oleg Ustinov" <Oleg.Ustinov@nectis.com> Sent: Tuesday, September 30, 2003 3:54 AM > this is my config: > [Gatekeeper::Auth] > PrefixAuth=optional;ARQ > RadAuth=optional;RRQ,ARQ > RadAliasAuth=required;Setup > NeighborPasswordAuth=required > > ATA register on Gatekeeper with RadAuth - that is OK - it works > then i call some number - come Setup auth step with RadAliasAuth with same > User-Name and then stop... ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
