k, i'll give it a shot tomorrow. Thanks. > -----Original Message----- > From: openh323gk-users-admin@lists.sourceforge.net > [mailto:openh323gk-users-admin@lists.sourceforge.net]On Behalf Of > Zygmuntowicz Michal > Sent: Sunday, September 28, 2003 4:37 PM > To: openh323gk-users@lists.sourceforge.net > Subject: Re: PDU Session Time-out=6600, RADIUS Call > Duration=0 > > > There was a bug with Session-Timeout attribute handling that is > already corrected in cvs. > This has been extensively discussed recently - just browse the > archive a few days back. > > ----- Original Message ----- > From: "Allen Williams" <anw@csunv.com> > Sent: Sunday, September 28, 2003 8:28 PM > Subject: PDU Session Time-out=6600, RADIUS > Call Duration=0 > > > > I have the RADIUS interface on gnugk up and working with my > RADIUS server. > > It authenticates the user, and sends back a message with a > session-timeout > > of 6600. The problem is the GK still doesn't let the call go > through, and, > > in the log, has a call duration of 0, even though it sees my > > session-timeout. Here is the log entry: > > ********************************************************** > > 2003/09/28 14:19:51.266 5 radproto.cxx(1713) RADIUS > Received PDU > > from RADIUS server 127.0.0.1 (127.0.0.1:1812) by socket > > port:10824:[0,130-131], PDU: { > > code = 2 (Access-Accept) > > id = 130 > > length = 38 octets > > authenticator = 16 octets { > > 37 d8 e5 3b 33 27 13 71 22 f8 66 9a 3a a2 34 31 > 7..;3'.q".f.:.41 > > } > > attributes = 3 elements { > > [0]= { > > type = 27 (Session-Timeout) > > length = 6 octets > > value = 4 octets { > > 00 00 19 c8 .... > > } > > } > > [1]= { > > type = 6 (Service-Type) > > length = 6 octets > > value = 4 octets { > > 00 00 00 02 .... > > } > > } > > [2]= { > > type = 6 (Service-Type) > > length = 6 octets > > value = 4 octets { > > 00 00 00 05 .... > > } > > } > > } > > } > > > > 2003/09/28 14:19:51.266 5 radauth.cxx(1626) RADAUTH > RadAliasAuth > > ARQ check set duration limit set: 0 > > 2003/09/28 14:19:51.267 2 gkauth.cxx(292) GkAuth > > RadAliasAuth - call duration limit is 0 > > 2003/09/28 14:19:51.268 2 RasSrv.cxx(1574) > > ARJ|192.168.1.100:1720|03001113212531957:dialedDigits|0 > > > > ******************************************************************* > > > > The session-timout is in the PDU and seen by GK (I verified > 19c8 is 6600, > > for those that don't have a calculator handy), but, as can be > seen on the > > third line from the bottom, the GK has set the call duration limit to 0. > > > > Any thoughts/suggestions? > > > > TIA, > > ------------------------------ > > Allen > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
