You probable missed that GNU GK is listening for incoming connections on port 1721, while the standard port number is 1720. You can change it in GK config to 1720 or change your GW config to send signalling to port 1721. ----- Original Message ----- From: "Roman Shibrick" <roman@xxline.net> Sent: Friday, September 19, 2003 8:55 AM > Hi, all. > Are there people who use this combination? ( GnuGk + VG200 )? > If call send from Gk to VG-200 no problems. > Is problems If call arrive from PSTN. > > PSTN -> VG200 -> GnuGk > > VG200 config: > > ! > dial-peer voice 2 voip > destination-pattern xxx > seccion target ipv4:ggk.ggk.ggk.ggk > progress_ind setup enable 3 > progress_ind alert enable 8 > codec ... > session target ras > ! > > -- > > debug isdn q931: > .... > Couse i = ... No route to destination > > On Gk : > debug trc 5 > > No event in trace ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
