Config is very basic taken from child.ini as follows: ======================================== [Gatekeeper::Main] Fourtytwo=42 TimeToLive=600 [RoutedMode] GKRouted=1 H245Routed=1 CallSignalPort=1721 SupportNATedEndpoints=1 AcceptUnregisteredCalls=1 [Proxy] Enable=1 RTPPortRange=5000-5010 [Endpoint] Gatekeeper=somegatekeeper.com Type=Gateway H323ID=mycompanye@internet.com E164=1817 Password=gatewaypass Prefix=1887 TimeToLive=900 RRQRetryInterval=10 ARQTimeout=2 [Endpoint::RewriteE164] 1887=7 [GkStatus::Auth] rule=allow # EOF -- by cwhuang ================================================= Basically the same as in the gnugk/etc directory.. Distribution is Red Hat Linux release 7.3 (Valhalla) Kernel 2.4.18-5 I have an iptables rule opening almost everything to the accepted ip's will tighten that up and add authorization later. I did nothing special. Did not even expect it to work but it did. -Randy On Fri, 2003-07-11 at 08:06, stan waddell wrote: > Randy could you post your config and OS also anything special you did to get > nat working > > > ------------------------------------------------------- > This SF.Net email sponsored by: Parasoft > Error proof Web apps, automate testing & more. > Download & eval WebKing and get a free book. > www.parasoft.com/bulletproofapps1 > _______________________________________________ > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
