The easiest way to do this is to have each originating GW to append a prefix to the dialed string and then on the GK have rewrite rules for each of these strings based upon the different endpoints you want to direct them to. Rob. On 6/3/03 10:12, "Victor Gamov" <vit@lipetsk.ru> wrote: > Hi gentlemens! > > Is it possible to create per gateway routing (or per call routing) on GK? > > For example, we have two gateways GW1 and GW2 registered on GK. Then GW1 > call NNN and GW2 call NNN too. And I want terminate this call on > different gateways (GW_end1 for GW1 and GW_end2 for GW2) based on the > call originator IP or others criteria. Is it possible? > > I think that it may be released based on RADIUS which get info from > backend DB during endpoint location by GW[1|2]. > > Or I misunderstood some things? > > Thanks! > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: eBay > Get office equipment for less on eBay! > http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 > _______________________________________________ > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ > ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
