Hello Oleg,
It seems that your GNU GK is well configured. Your problem
is ATA 186. Please make sure you set up h323id and password
for your ATA (UseLoginID,LoginID0,LoginID1,PWD0,PWD1,
AuthMethod=1). If does not work, please send detailed RRQ message
received.
----- Original Message -----
From: "Oleg Ustinov" <Oleg.Ustinov@nectis.com>
To: <openh323gk-users@lists.sourceforge.net>
Sent: Monday, June 02, 2003 4:19 AM
Subject: RE: [Openh323gk-users] Radius configuration in gatekeeper.ini
> Hello Michal,
> I use RadAuth for follow:
> ATA186 -> GNUGk -> FreeRadius
>
> This is requested trace info:
>
> ------------------- Start
> 2003/06/01 23:18:09.306 1 RasSrv.cxx(927) GK RRQ Received
> 2003/06/01 23:18:09.308 3 radauth.cxx(400) RADAUTH RRQ Auth
> failed - no m_tokens
> 2003/06/01 23:18:09.309 2 gkauth.h(84) GkAuth RadAuth
> check failed
> 2003/06/01 23:18:09.314 2 RasSrv.cxx(1182)
> RRJ|192.168.1.253|oustinov:h323_ID=06181569810:dialedDigits|terminal|securit
> yDenial;
>
> 2003/06/01 23:18:09.316 3 RasSrv.cxx(2072) GK Send to
> 192.168.1.253:1719
> registrationReject {
> requestSeqNum = 761
> protocolIdentifier = 0.0.8.2250.0.2
> rejectReason = securityDenial <<null>>
> gatekeeperIdentifier = 15 characters {
> 004e 0045 0043 0054 0049 0053 005f 004e NECTIS_N
> 0065 0074 0056 006f 0069 0063 0065 etVoice
> }
> ------------------- end
> Config:
> -------------------------------- Start
> [Gatekeeper::Auth]
> RadAuth=required;RRQ,ARQ
> #RadAuth=sufficient;RRQ
> #RadAuth=optional;ARQ
> default=allow
>
> [RadAuth]
> Servers=127.0.0.1
> #DefaultAuthPort=1812
> SharedSecret=nectis
> RequestTimeout=2000
> IdCacheTimeout=9000
> SocketDeleteTimeout=60000
> RequestRetransmissions=2
> AppendCiscoAttributes=1
> IncludeEndpointIP=1
> --------------------------------- End
>
> Best regards,
> Oleg
>
>
> -----Original Message-----
> From: openh323gk-users-admin@lists.sourceforge.net
> [mailto:openh323gk-users-admin@lists.sourceforge.net]On Behalf Of
> Zygmuntowicz Michal
> Sent: Monday, June 02, 2003 12:58 AM
> To: openh323gk-users@lists.sourceforge.net
> Subject: Re: [Openh323gk-users] Radius configuration in gatekeeper.ini
>
>
> > thanks for information, But it still not work - it send NO requests to
> > radius - I've use FreeRadius and in log exist no ANY path of GNUGk, and
> > debug -ttt tell me "no m_tokens". What's mind?
>
> Are you using RadAuth or RadAliasAuth module? "no m_token" can mean
> that your endpoints do not support CAT authentication scheme required
> for RADIUS username/password based authentication. If so, you should
> use RadAliasAuth - this one does not require any tokens or cryptoTokens.
> Please post more detailed fragment of "no m_tokens" log and/or your config
> fragment for radius authentication.
>
> ---
> Michal Zygmuntowicz
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: eBay
> Get office equipment for less on eBay!
> http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
> _______________________________________________
> List: Openh323gk-users@lists.sourceforge.net
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: eBay
> Get office equipment for less on eBay!
> http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
> _______________________________________________
> List: Openh323gk-users@lists.sourceforge.net
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
