When you create the volume you use something like this: gluster volume create VOLUME_NAME replica 3 arbiter 1 hostA:/brick1 hostB:/brick1 hostC:/brick1 hostA:/brick2 hostB:/brick2 hostC:/brick2 Every third brick (which is a combination of host + mount point) is always the arbiter in your case, so hostC:/brick1 will be the arbiter for the first subvolume and hostC:/brick2 will be the arbiter for the second subvolume. Ordering is very important when creating replicated volumes. WARNING!!! THE FOLLOWING IS AN EXAMPLE OF A BAD CREATION!!! gluster volume create VOLUME_NAME replica 3 arbiter 1 hostA:/brick1 hostA:/brick2 hostB:/brick1 hostB:/brick2 hostC:/brick1 hostC:/brick2 In this BAD example 2 files (let's imagine that disperse algorithm spreads them on the 2 subvolumes) will be located like this: hostA:/brick1 -> FILE1 hostA:/brick2 -> FILE1 hostB:/brick1 -> METADATA of FILE1 hostB:/brick2 -> FILE2 hostC:/brick1 -> FILE2 hostC:/brick2 -> METADATA of FILE2 The above example is bad, as the failure of hostA will lead to partial data unavailability (or even dataloss). It is always wise to spread data between bricks on separate hosts. AGAIN, DO NOT USE THE EXAMPLE ABOVE! Best Regards, Strahil Nikolow В сряда, 21 октомври 2020 г., 14:42:27 Гринуич+3, Gilberto Nunes <gilberto.nunes32@xxxxxxxxx> написа: >> I would use the thord system as an arbiter which stores only metadata of the file , but no data. Yep! But it's not clear to me how gluster will pick up the third node to be an arbiter... Is there any parameter to pass during volume creation or just replica 1 and than gluster will analyze the hosts and then pick up the less powerful? Sorry for newbie question... Thanks --- Gilberto Nunes Ferreira Em qua., 21 de out. de 2020 às 07:31, Strahil Nikolov <hunter86_bg@xxxxxxxxx> escreveu: > I would use the thord system as an arbiter which stores only metadata of the file , but no data. > For such systems , SSDs are most optimal. > > > Best Regards, > Strahil Nikolov > > > > > > > В вторник, 20 октомври 2020 г., 16:53:59 Гринуич+3, Gilberto Nunes <gilberto.nunes32@xxxxxxxxx> написа: > > > > > > Hi > > I have 3 servers but the third one is a very low machine compared to the 2 others servers. > How could I create a replica 3 in order to prevent split-brain, but tell the gluster to not use the third node too much??? > I hope I can make myself understandable. > > Thanks > > --- > Gilberto Nunes Ferreira > > > > > > ________ > > > > Community Meeting Calendar: > > Schedule - > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC > Bridge: https://bluejeans.com/441850968 > > Gluster-users mailing list > Gluster-users@xxxxxxxxxxx > https://lists.gluster.org/mailman/listinfo/gluster-users > ________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://bluejeans.com/441850968 Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
