Re: gluster peer disconnected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Is 'gluster  pool list' consistent on all nodes?
Do you have all your bricks properly mounted on the affected node?

Bet Regards,
Strahil Nikolov

На 30 юли 2020 г. 20:22:18 GMT+03:00, Pat Haley <phaley@xxxxxxx> написа:
>
>Hi,
>
>We have a cluster whose common storage is a gluster volume consisting
>of 
>4 bricks residing on 2 servers (more details at bottom).  Yesterday we 
>experienced a power outage.  To start the gluster volume after the
>power 
>came back I had to
>
>  * manually start a gluster daemon on one of the servers (mseas-data3)
>  * start the gluster volume on the other server (mseas-data2)
>      o I had just tried starting the gluster volume without manually
>        starting the other daemon but that was unsuccessful.
>
>After this my recollection is that the peers were talking to each other
>
>at that time.
>
>Today I was looking around and noticed that the mseas-data3 server is
>in 
>a disconnected state (even though the compute nodes of our cluster are 
>seeing the full gluster volume)
>
>-----------------------
>
>[root@mseas-data2 ~]# gluster peer status
>Number of Peers: 1
>
>Hostname: mseas-data3
>Uuid: b39d4deb-c291-437e-8013-09050c1fa9e3
>State: Peer in Cluster (Disconnected)
>
>-----------------------
>
>Following the advice on 
>https://lists.gluster.org/pipermail/gluster-users/2015-April/021597.html
>
>, I confirmed that the 2 servers can ping each other.  The gluster 
>daemon on mseas-data2 is active but the daemon on mseas-data3 shows
>
>--------------------------------
>
>[root@mseas-data3 ~]# service glusterd status
>glusterd dead but pid file exists
>
>--------------------------------
>
>Is it safe to just restart that daemon on mseas-data3?  Is there some 
>other procedure I should do? I ask because we have a number of job 
>running that appear to be successfully writing to the gluster volume
>and 
>I'd prefer that they continue if possible.
>
>Any advice would be appreciated.  Thanks
>
>---------------------------------------------------
>
>[root@mseas-data2 ~]# gluster volume info
>
>Volume Name: data-volume
>Type: Distribute
>Volume ID: c162161e-2a2d-4dac-b015-f31fd89ceb18
>Status: Started
>Number of Bricks: 4
>Transport-type: tcp
>Bricks:
>Brick1: mseas-data2:/mnt/brick1
>Brick2: mseas-data2:/mnt/brick2
>Brick3: mseas-data3:/export/sda/brick3
>Brick4: mseas-data3:/export/sdc/brick4
>Options Reconfigured:
>diagnostics.client-log-level: ERROR
>network.inode-lru-limit: 50000
>performance.md-cache-timeout: 60
>performance.open-behind: off
>disperse.eager-lock: off
>auth.allow: *
>server.allow-insecure: on
>nfs.exports-auth-enable: on
>diagnostics.brick-sys-log-level: WARNING
>performance.readdir-ahead: on
>nfs.disable: on
>nfs.export-volumes: off
>cluster.min-free-disk: 1%
________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://bluejeans.com/441850968

Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux