Re: Healing entries get healed but there are constantly new entries appearing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Karthik,

thank you very much. That was exactly the problem.
Running the command (cat <mount-path>/.meta/graphs/active/<vol-name>-client-*/private | egrep -i 'connected') on the clients revealed that a few were not connected to all bricks.
After restarting them, everything went back to normal.

Regards,
Ulrich

Am 06.02.20 um 12:51 schrieb Karthik Subrahmanya:
Hi Ulrich,

From the problem statement, seems like the client(s) have lost connection with brick. Can you give the following information?
- How many clients are there for this volume and which version they are in?
- gluster volume info <vol-name> & gluster volume status <vol-name> outputs
- Check whether all the clients are connected to all the bricks.
If you are using the fuse clients give the output of the following from all the clients
cat <mount-path>/.meta/graphs/active/<vol-name>-client-*/private | egrep -i 'connected'
-If you are using non fuse clients generate the statedumps (https://docs.gluster.org/en/latest/Troubleshooting/statedump/) of each clients and give the output of
grep -A 2 "xlator.protocol.client" /var/run/gluster/<dump-file>
(If you have changed the statedump-path replace the path in the above command)

Regards,
Karthik

On Thu, Feb 6, 2020 at 5:06 PM Ulrich Pötter <ulrich.poetter@xxxxxxxxxxxxx> wrote:
Dear Gluster Users,

we are running the following Gluster setup:
Replica 3 on 3 servers. Two are CentOs 7.6 with Gluster 6.5 and one was
upgraded to Centos 7.7 with Gluster 6.7.

Since the upgrade to gluster 6.7 on one of the servers, we encountered
the following issue:
New healing entries appear and get healed, but soon afterwards new
healing entries appear.
The abovementioned problem started after we upgraded the server.
The healing issues do not only appear on the upgraded server, but on all
three.

This does not seem to be a split brain issue as the output of the
command "gluster volume head <vol> info split-brain" is "number of
entries in split-brain: 0"

Has anyone else observed such behavior with different Gluster versions
in one replica setup?

We hesitate with updating the other nodes, as we do not know if this
standard Gluster behaviour or if there is more to this problem.

Can you help us?

Thanks in advance,
Ulrich

________

Community Meeting Calendar:

APAC Schedule -
Every 2nd and 4th Tuesday at 11:30 AM IST
Bridge: https://bluejeans.com/441850968

NA/EMEA Schedule -
Every 1st and 3rd Tuesday at 01:00 PM EDT
Bridge: https://bluejeans.com/441850968

Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users


________

Community Meeting Calendar:

APAC Schedule -
Every 2nd and 4th Tuesday at 11:30 AM IST
Bridge: https://bluejeans.com/441850968

NA/EMEA Schedule -
Every 1st and 3rd Tuesday at 01:00 PM EDT
Bridge: https://bluejeans.com/441850968

Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux