Re: Removing subvolume from dist/rep volume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for bringing in the relevant experts on this one, Nithya.

Since my last mail to the list, I've tried

- Deleting some old disk image files from the volume, in hopes that the
  problem chunks might belong to them

- Running a "gluster volume heal full"

- Stopping the remove-brick operation and then running it again to retry

Unfortunately, none of this has had any effect.  It didn't even remove a
single error from the list of problems.


Would it be reasonable to proceed by attempting to identify which disk
image file(s) the problem chunks belong to, then shut down the
corresponding VMs, copy the files (accepting which ever side of the
apparent split-brain gluster chooses for the copy - the VM has been
running in this state for 8 months, so it doesn't seem to be causing
problems), restart each VM on the new copy, and then, after a suitable
period to be sure everything is ok, delete the original image file,
taking the problem chunks with it?  Or would gluster just throw an error
when I try to make the copy and refuse to do it?

If that is a viable approach (or even if it isn't, really), how do I
determine which actual file these problem chunks belong to?

Or should I come at it in a completely different way?


Also, if this is a split-brain issue (which I agree it seems to be), why
doesn't "heal info" see it?

# gluster volume heal palantir info split-brain | grep split
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0
Number of entries in split-brain: 0


On Tue, Jul 02, 2019 at 12:25:02PM +0530, Nithya Balachandran wrote:
> Hi Dave,
> 
> Yes, files in split brain are not migrated as we cannot figure out which is
> the good copy. Adding Ravi to look at this and see what can be done.
> Also adding Krutika as this is a sharded volume.
> 
> The files with the "---------T" permissions are internal files and can be
> ignored. Ravi and Krutika, please take a look at the other files.
> 
> Regards,
> Nithya
> 
> 
> On Fri, 28 Jun 2019 at 19:56, Dave Sherohman <dave@xxxxxxxxxxxxx> wrote:
> 
> > On Thu, Jun 27, 2019 at 12:17:10PM +0530, Nithya Balachandran wrote:
> > > There are some edge cases that may prevent a file from being migrated
> > > during a remove-brick. Please do the following after this:
> > >
> > >    1. Check the remove-brick status for any failures.  If there are any,
> > >    check the rebalance log file for errors.
> > >    2. Even if there are no failures, check the removed bricks to see if
> > any
> > >    files have not been migrated. If there are any, please check that
> > they are
> > >    valid files on the brick and copy them to the volume from the brick
> > to the
> > >    mount point.
> >
> > Well, looks like I hit one of those edge cases.  Probably because of
> > some issues around a reboot last September which left a handful of files
> > in a state where self-heal identified them as needing to be healed, but
> > incapable of actually healing them.  (Check the list archives for
> > "Kicking a stuck heal", posted on Sept 4, if you want more details.)
> >
> > So I'm getting 9 failures on the arbiter (merlin), 8 on one data brick
> > (gandalf), and 3 on the other (saruman).  Looking in
> > /var/log/gluster/palantir-rebalance.log, I see those numbers of
> >
> > migrate file failed: /.shard/291e9749-2d1b-47af-ad53-3a09ad4e64c6.229:
> > failed to lock file on palantir-replicate-1 [Stale file handle]
> >
> > errors.
> >
> > Also, merlin has four errors, and gandalf has one, of the form:
> >
> > Gfid mismatch detected for
> > <gfid:be318638-e8a0-4c6d-977d-7a937aa84806>/0f500288-ff62-4f0b-9574-53f510b4159f.2898>,
> > 9f00c0fe-58c3-457e-a2e6-f6a006d1cfc6 on palantir-client-7 and
> > 08bb7cdc-172b-4c21-916a-2a244c095a3e on palantir-client-1.
> >
> > There are no gfid mismatches recorded on saruman.  All of the gfid
> > mismatches are for <gfid:be318638-e8a0-4c6d-977d-7a937aa84806> and (on
> > saruman) appear to correspond to 0-byte files (e.g.,
> > .shard/0f500288-ff62-4f0b-9574-53f510b4159f.2898, in the case of the
> > gfid mismatch quoted above).
> >
> > For both types of errors, all affected files are in .shard/ and have
> > UUID-style names, so I have no idea which actual files they belong to.
> > File sizes are generally either 0 bytes or 4M (exactly), although one of
> > them has a size slightly larger than 3M.  So I'm assuming they're chunks
> > of larger files (which would be almost all the files on the volume -
> > it's primarily holding disk image files for kvm servers).
> >
> > Web searches generally seem to consider gfid mismatches to be a form of
> > split-brain, but `gluster volume heal palantir info split-brain` shows
> > "Number of entries in split-brain: 0" for all bricks, including those
> > bricks which are reporting gfid mismatches.
> >
> >
> > Given all that, how do I proceed with cleaning up the stale handle
> > issues?  I would guess that this will involve somehow converting the
> > shard filename to a "real" filename, then shutting down the
> > corresponding VM and maybe doing some additional cleanup.
> >
> > And then there's the gfid mismatches.  Since they're for 0-byte files,
> > is it safe to just ignore them on the assumption that they only hold
> > metadata?  Or do I need to do some kind of split-brain resolution on
> > them (even though gluster says no files are in split-brain)?
> >
> >
> > Finally, a listing of /var/local/brick0/data/.shard on saruman, in case
> > any of the information it contains (like file sizes/permissions) might
> > provide clues to resolving the errors:
> >
> > --- cut here ---
> > root@saruman:/var/local/brick0/data/.shard# ls -l
> > total 63996
> > -rw-rw---- 2 root libvirt-qemu       0 Sep 17  2018
> > 0f500288-ff62-4f0b-9574-53f510b4159f.2864
> > -rw-rw---- 2 root libvirt-qemu       0 Sep 17  2018
> > 0f500288-ff62-4f0b-9574-53f510b4159f.2868
> > -rw-rw---- 2 root libvirt-qemu       0 Sep 17  2018
> > 0f500288-ff62-4f0b-9574-53f510b4159f.2879
> > -rw-rw---- 2 root libvirt-qemu       0 Sep 17  2018
> > 0f500288-ff62-4f0b-9574-53f510b4159f.2898
> > -rw------- 2 root libvirt-qemu 4194304 May 17 14:42
> > 291e9749-2d1b-47af-ad53-3a09ad4e64c6.229
> > -rw------- 2 root libvirt-qemu 4194304 Jun 24 09:10
> > 291e9749-2d1b-47af-ad53-3a09ad4e64c6.925
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Jun 26 12:54
> > 2df12cb0-6cf4-44ae-8b0a-4a554791187e.266
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Jun 26 16:30
> > 2df12cb0-6cf4-44ae-8b0a-4a554791187e.820
> > -rw-r--r-- 2 root libvirt-qemu 4194304 Jun 17 20:22
> > 323186b1-6296-4cbe-8275-b940cc9d65cf.27466
> > -rw-r--r-- 2 root libvirt-qemu 4194304 Jun 27 05:01
> > 323186b1-6296-4cbe-8275-b940cc9d65cf.32575
> > -rw-r--r-- 2 root libvirt-qemu 3145728 Jun 11 13:23
> > 323186b1-6296-4cbe-8275-b940cc9d65cf.3448
> > ---------T 2 root libvirt-qemu       0 Jun 28 14:26
> > 4cd094f4-0344-4660-98b0-83249d5bd659.22998
> > -rw------- 2 root libvirt-qemu 4194304 Mar 13  2018
> > 6cdd2e5c-f49e-492b-8039-239e71577836.1302
> > ---------T 2 root libvirt-qemu       0 Jun 28 13:22
> > 7530a2d1-d6ec-4a04-95a2-da1f337ac1ad.47131
> > ---------T 2 root libvirt-qemu       0 Jun 28 13:22
> > 7530a2d1-d6ec-4a04-95a2-da1f337ac1ad.52615
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Jun 27 08:56
> > 8fefae99-ed2a-4a8f-ab87-aa94c6bb6e68.100
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Jun 27 11:29
> > 8fefae99-ed2a-4a8f-ab87-aa94c6bb6e68.106
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Jun 28 02:35
> > 8fefae99-ed2a-4a8f-ab87-aa94c6bb6e68.137
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Nov  4  2018
> > 9544617c-901c-4613-a94b-ccfad4e38af1.165
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Nov  4  2018
> > 9544617c-901c-4613-a94b-ccfad4e38af1.168
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Nov  5  2018
> > 9544617c-901c-4613-a94b-ccfad4e38af1.193
> > -rw-rw-r-- 2 root libvirt-qemu 4194304 Nov  6  2018
> > 9544617c-901c-4613-a94b-ccfad4e38af1.3800
> > ---------T 2 root libvirt-qemu       0 Jun 28 15:02
> > b48a5934-5e5b-4918-8193-6ff36f685f70.46559
> > -rw-rw---- 2 root libvirt-qemu       0 Oct 12  2018
> > c5bde2f2-3361-4d1a-9c88-28751ef74ce6.3568
> > -rw-r--r-- 2 root libvirt-qemu 4194304 Apr 13  2018
> > c953c676-152d-4826-80ff-bd307fa7f6e5.10724
> > -rw-r--r-- 2 root libvirt-qemu 4194304 Apr 11  2018
> > c953c676-152d-4826-80ff-bd307fa7f6e5.3101
> > --- cut here ---
> >
> > --
> > Dave Sherohman
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users@xxxxxxxxxxx
> > https://lists.gluster.org/mailman/listinfo/gluster-users
> >


-- 
Dave Sherohman
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux