Re: Extremely low performance - am I doing somethingwrong?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I think , it'related to the sync type of oflag.
Do you have a raid controller on each brick , to immediate take the data into the cache ?

Best Regards,
Strahil NikolovOn Jul 3, 2019 23:15, Vladimir Melnik <v.melnik@xxxxxxxx> wrote:
>
> Indeed, I wouldn't be surprised if I had around 80-100 MB/s, but 10-15 
> MB/s is really few. :-( 
>
> Even when I mount a filesystem on the same GlusterFS node, I have the 
> following result: 
> 10485760 bytes (10 MB) copied, 0.409856 s, 25.6 MB/s 
> 10485760 bytes (10 MB) copied, 0.38967 s, 26.9 MB/s 
> 10485760 bytes (10 MB) copied, 0.466758 s, 22.5 MB/s 
> 10485760 bytes (10 MB) copied, 0.412075 s, 25.4 MB/s 
> 10485760 bytes (10 MB) copied, 0.381626 s, 27.5 MB/s 
>
> At the same time on the same node when I'm writing directly to the disk: 
> 10485760 bytes (10 MB) copied, 0.0326612 s, 321 MB/s 
> 10485760 bytes (10 MB) copied, 0.0302878 s, 346 MB/s 
> 10485760 bytes (10 MB) copied, 0.0352449 s, 298 MB/s 
> 10485760 bytes (10 MB) copied, 0.0316872 s, 331 MB/s 
> 10485760 bytes (10 MB) copied, 0.0333189 s, 315 MB/s 
>
> Can't explain it to myself. Are replica-3 volumes really so slow? 
>
> On Wed, Jul 03, 2019 at 03:16:45PM -0400, Dmitry Filonov wrote: 
> > Well, if your network is limited to 100MB/s then it doesn't matter if 
> > storage is capable of doing 300+MB/s. 
> > But 15 MB/s is still way less than 100 MB/s 
> > 
> > P.S. just tried on my gluster and found out that am getting ~15MB/s on 
> > replica 3 volume on SSDs and... 2MB/s on replica 3 volume on HDDs. 
> > Something to look at next week. 
> > 
> > 
> > 
> > -- 
> > Dmitry Filonov 
> > Linux Administrator 
> > SBGrid Core | Harvard Medical School 
> > 250 Longwood Ave, SGM-114 
> > Boston, MA 02115 
> > 
> > 
> > On Wed, Jul 3, 2019 at 12:18 PM Vladimir Melnik <v.melnik@xxxxxxxx> wrote: 
> > 
> > > Thank you, it helped a little: 
> > > 
> > > $ for i in {1..5}; do { dd if=/dev/zero of=/mnt/glusterfs1/test.tmp bs=1M 
> > > count=10 oflag=sync; rm -f /mnt/glusterfs1/test.tmp; } done 2>&1 | grep 
> > > copied 
> > > 10485760 bytes (10 MB) copied, 0.738968 s, 14.2 MB/s 
> > > 10485760 bytes (10 MB) copied, 0.725296 s, 14.5 MB/s 
> > > 10485760 bytes (10 MB) copied, 0.681508 s, 15.4 MB/s 
> > > 10485760 bytes (10 MB) copied, 0.85566 s, 12.3 MB/s 
> > > 10485760 bytes (10 MB) copied, 0.661457 s, 15.9 MB/s 
> > > 
> > > But 14-15 MB/s is still quite far from the actual storage's performance 
> > > (200-3000 MB/s). :-( 
> > > 
> > > Here's full configuration dump (just in case): 
> > > 
> > > Option                                  Value 
> > > ------                                  ----- 
> > > cluster.lookup-unhashed                 on 
> > > cluster.lookup-optimize                 on 
> > > cluster.min-free-disk                   10% 
> > > cluster.min-free-inodes                 5% 
> > > cluster.rebalance-stats                 off 
> > > cluster.subvols-per-directory           (null) 
> > > cluster.readdir-optimize                off 
> > > cluster.rsync-hash-regex                (null) 
> > > cluster.extra-hash-regex                (null) 
> > > cluster.dht-xattr-name                  trusted.glusterfs.dht 
> > > cluster.randomize-hash-range-by-gfid    off 
> > > cluster.rebal-throttle                  normal 
> > > cluster.lock-migration                  off 
> > > cluster.force-migration                 off 
> > > cluster.local-volume-name               (null) 
> > > cluster.weighted-rebalance              on 
> > > cluster.switch-pattern                  (null) 
> > > cluster.entry-change-log                on 
> > > cluster.read-subvolume                  (null) 
> > > cluster.read-subvolume-index            -1 
> > > cluster.read-hash-mode                  1 
> > > cluster.background-self-heal-count      8 
> > > cluster.metadata-self-heal              off 
> > > cluster.data-self-heal                  off 
> > > cluster.entry-self-heal                 off 
> > > cluster.self-heal-daemon                on 
> > > cluster.heal-timeout                    600 
> > > cluster.self-heal-window-size           1 
> > > cluster.data-change-log                 on 
> > > cluster.metadata-change-log             on 
> > > cluster.data-self-heal-algorithm        full 
> > > cluster.eager-lock                      enable 
> > > disperse.eager-lock                     on 
> > > disperse.other-eager-lock               on 
> > > disperse.eager-lock-timeout             1 
> > > disperse.other-eager-lock-timeout       1 
> > > cluster.quorum-type                     auto 
> > > cluster.quorum-count                    (null) 
> > > cluster.choose-local                    off 
> > > cluster.self-heal-readdir-size          1KB 
> > > cluster.post-op-delay-secs              1 
> > > cluster.ensure-durability               on 
> > > cluster.consistent-metadata             no 
> > > cluster.heal-wait-queue-length          128 
> > > cluster.favorite-child-policy           none 
> > > cluster.full-lock                       yes 
> > > diagnostics.latency-measurement         off 
> > > diagnostics.dump-fd-stats               off 
> > > diagnostics.count-fop-hits              off 
> > > diagnostics.brick-log-level             INFO 
> > > diagnostics.client-log-level            INFO 
> > > diagnostics.brick-sys-log-level         CRITICAL 
> > > diagnostics.client-sys-log-level        CRITICAL 
> > > diagnostics.brick-logger                (null) 
> > > diagnostics.client-logger               (null) 
> > > diagnostics.brick-log-format            (null) 
> > > diagnostics.client-log-format      
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux