Re: Extremely low performance - am I doing somethingwrong?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you try with a fresh replica volume with 'virt' group applied ?

Best Regards,
Strahil Nikolov

В сряда, 3 юли 2019 г., 19:18:18 ч. Гринуич+3, Vladimir Melnik <v.melnik@xxxxxxxx> написа:


Thank you, it helped a little:

$ for i in {1..5}; do { dd if=/dev/zero of=/mnt/glusterfs1/test.tmp bs=1M count=10 oflag=sync; rm -f /mnt/glusterfs1/test.tmp; } done 2>&1 | grep copied
10485760 bytes (10 MB) copied, 0.738968 s, 14.2 MB/s
10485760 bytes (10 MB) copied, 0.725296 s, 14.5 MB/s
10485760 bytes (10 MB) copied, 0.681508 s, 15.4 MB/s
10485760 bytes (10 MB) copied, 0.85566 s, 12.3 MB/s
10485760 bytes (10 MB) copied, 0.661457 s, 15.9 MB/s

But 14-15 MB/s is still quite far from the actual storage's performance (200-3000 MB/s). :-(

Here's full configuration dump (just in case):

Option                                  Value
------                                  -----
cluster.lookup-unhashed                on
cluster.lookup-optimize                on
cluster.min-free-disk                  10%
cluster.min-free-inodes                5%
cluster.rebalance-stats                off
cluster.subvols-per-directory          (null)
cluster.readdir-optimize                off
cluster.rsync-hash-regex                (null)
cluster.extra-hash-regex                (null)
cluster.dht-xattr-name                  trusted.glusterfs.dht
cluster.randomize-hash-range-by-gfid    off
cluster.rebal-throttle                  normal
cluster.lock-migration                  off
cluster.force-migration                off
cluster.local-volume-name              (null)
cluster.weighted-rebalance              on
cluster.switch-pattern                  (null)
cluster.entry-change-log                on
cluster.read-subvolume                  (null)
cluster.read-subvolume-index            -1
cluster.read-hash-mode                  1
cluster.background-self-heal-count      8
cluster.metadata-self-heal              off
cluster.data-self-heal                  off
cluster.entry-self-heal                off
cluster.self-heal-daemon                on
cluster.heal-timeout                    600
cluster.self-heal-window-size          1
cluster.data-change-log                on
cluster.metadata-change-log            on
cluster.data-self-heal-algorithm        full
cluster.eager-lock                      enable
disperse.eager-lock                    on
disperse.other-eager-lock              on
disperse.eager-lock-timeout            1
disperse.other-eager-lock-timeout      1
cluster.quorum-type                    auto
cluster.quorum-count                    (null)
cluster.choose-local                    off
cluster.self-heal-readdir-size          1KB
cluster.post-op-delay-secs              1
cluster.ensure-durability              on
cluster.consistent-metadata            no
cluster.heal-wait-queue-length          128
cluster.favorite-child-policy          none
cluster.full-lock                      yes
diagnostics.latency-measurement        off
diagnostics.dump-fd-stats              off
diagnostics.count-fop-hits              off
diagnostics.brick-log-level            INFO
diagnostics.client-log-level            INFO
diagnostics.brick-sys-log-level        CRITICAL
diagnostics.client-sys-log-level        CRITICAL
diagnostics.brick-logger                (null)
diagnostics.client-logger              (null)
diagnostics.brick-log-format            (null)
diagnostics.client-log-format          (null)
diagnostics.brick-log-buf-size          5
diagnostics.client-log-buf-size        5
diagnostics.brick-log-flush-timeout    120
diagnostics.client-log-flush-timeout    120
diagnostics.stats-dump-interval        0
diagnostics.fop-sample-interval        0
diagnostics.stats-dump-format          json
diagnostics.fop-sample-buf-size        65535
diagnostics.stats-dnscache-ttl-sec      86400
performance.cache-max-file-size        0
performance.cache-min-file-size        0
performance.cache-refresh-timeout      1
performance.cache-priority
performance.cache-size                  32MB
performance.io-thread-count            16
performance.high-prio-threads          16
performance.normal-prio-threads        16
performance.low-prio-threads            32
performance.least-prio-threads          1
performance.enable-least-priority      on
performance.iot-watchdog-secs          (null)
performance.iot-cleanup-disconnected-reqsoff
performance.iot-pass-through            false
performance.io-cache-pass-through      false
performance.cache-size                  128MB
performance.qr-cache-timeout            1
performance.cache-invalidation          false
performance.ctime-invalidation          false
performance.flush-behind                on
performance.nfs.flush-behind            on
performance.write-behind-window-size    1MB
performance.resync-failed-syncs-after-fsyncoff
performance.nfs.write-behind-window-size1MB
performance.strict-o-direct            off
performance.nfs.strict-o-direct        off
performance.strict-write-ordering      off
performance.nfs.strict-write-ordering  off
performance.write-behind-trickling-writeson
performance.aggregate-size              128KB
performance.nfs.write-behind-trickling-writeson
performance.lazy-open                  yes
performance.read-after-open            yes
performance.open-behind-pass-through    false
performance.read-ahead-page-count      4
performance.read-ahead-pass-through    false
performance.readdir-ahead-pass-through  false
performance.md-cache-pass-through      false
performance.md-cache-timeout            1
performance.cache-swift-metadata        true
performance.cache-samba-metadata        false
performance.cache-capability-xattrs    true
performance.cache-ima-xattrs            true
performance.md-cache-statfs            off
performance.xattr-cache-list
performance.nl-cache-pass-through      false
features.encryption                    off
network.frame-timeout                  1800
network.ping-timeout                    42
network.tcp-window-size                (null)
client.ssl                              off
network.remote-dio                      enable
client.event-threads                    4
client.tcp-user-timeout                0
client.keepalive-time                  20
client.keepalive-interval              2
client.keepalive-count                  9
network.tcp-window-size                (null)
network.inode-lru-limit                16384
auth.allow                              *
auth.reject                            (null)
transport.keepalive                    1
server.allow-insecure                  on
server.root-squash                      off
server.all-squash                      off
server.anonuid                          65534
server.anongid                          65534
server.statedump-path                  /var/run/gluster
server.outstanding-rpc-limit            64
server.ssl                              off
auth.ssl-allow                          *
server.manage-gids                      off
server.dynamic-auth                    on
client.send-gids                        on
server.gid-timeout                      300
server.own-thread                      (null)
server.event-threads                    4
server.tcp-user-timeout                42
server.keepalive-time                  20
server.keepalive-interval              2
server.keepalive-count                  9
transport.listen-backlog                1024
transport.address-family                inet
performance.write-behind                on
performance.read-ahead                  off
performance.readdir-ahead              on
performance.io-cache                    off
performance.open-behind                on
performance.quick-read                  off
performance.nl-cache                    off
performance.stat-prefetch              on
performance.client-io-threads          on
performance.nfs.write-behind            on
performance.nfs.read-ahead              off
performance.nfs.io-cache                off
performance.nfs.quick-read              off
performance.nfs.stat-prefetch          off
performance.nfs.io-threads              off
performance.force-readdirp              true
performance.cache-invalidation          false
performance.global-cache-invalidation  true
features.uss                            off
features.snapshot-directory            .snaps
features.show-snapshot-directory        off
features.tag-namespaces                off
network.compression                    off
network.compression.window-size        -15
network.compression.mem-level          8
network.compression.min-size            0
network.compression.compression-level  -1
network.compression.debug              false
features.default-soft-limit            80%
features.soft-timeout                  60
features.hard-timeout                  5
features.alert-time                    86400
features.quota-deem-statfs              off
geo-replication.indexing                off
geo-replication.indexing                off
geo-replication.ignore-pid-check        off
geo-replication.ignore-pid-check        off
features.quota                          off
features.inode-quota                    off
features.bitrot                        disable
debug.trace                            off
debug.log-history                      no
debug.log-file                          no
debug.exclude-ops                      (null)
debug.include-ops                      (null)
debug.error-gen                        off
debug.error-failure                    (null)
debug.error-number                      (null)
debug.random-failure                    off
debug.error-fops                        (null)
nfs.disable                            on
features.read-only                      off
features.worm                          off
features.worm-file-level                off
features.worm-files-deletable          on
features.default-retention-period      120
features.retention-mode                relax
features.auto-commit-period            180
storage.linux-aio                      off
storage.batch-fsync-mode                reverse-fsync
storage.batch-fsync-delay-usec          0
storage.owner-uid                      -1
storage.owner-gid                      -1
storage.node-uuid-pathinfo              off
storage.health-check-interval          30
storage.build-pgfid                    off
storage.gfid2path                      on
storage.gfid2path-separator            :
storage.reserve                        1
storage.health-check-timeout            10
storage.fips-mode-rchecksum            off
storage.force-create-mode              0000
storage.force-directory-mode            0000
storage.create-mask                    0777
storage.create-directory-mask          0777
storage.max-hardlinks                  100
features.ctime                          on
config.gfproxyd                        off
cluster.server-quorum-type              server
cluster.server-quorum-ratio            0
changelog.changelog                    off
changelog.changelog-dir                {{ brick.path }}/.glusterfs/changelogs
changelog.encoding                      ascii
changelog.rollover-time                15
changelog.fsync-interval                5
changelog.changelog-barrier-timeout    120
changelog.capture-del-path              off
features.barrier                        disable
features.barrier-timeout                120
features.trash                          off
features.trash-dir                      .trashcan
features.trash-eliminate-path          (null)
features.trash-max-filesize            5MB
features.trash-internal-op              off
cluster.enable-shared-storage          disable
locks.trace                            off
locks.mandatory-locking                off
cluster.disperse-self-heal-daemon      enable
cluster.quorum-reads                    no
client.bind-insecure                    (null)
features.shard                          on
features.shard-block-size              64MB
features.shard-lru-limit                16384
features.shard-deletion-rate            100
features.scrub-throttle                lazy
features.scrub-freq                    biweekly
features.scrub                          false
features.expiry-time                    120
features.cache-invalidation            off
features.cache-invalidation-timeout    60
features.leases                        off
features.lease-lock-recall-timeout      60
disperse.background-heals              8
disperse.heal-wait-qlength              128
cluster.heal-timeout                    600
dht.force-readdirp                      on
disperse.read-policy                    gfid-hash
cluster.shd-max-threads                8
cluster.shd-wait-qlength                10000
cluster.shd-wait-qlength                10000
cluster.locking-scheme                  granular
cluster.granular-entry-heal            no
features.locks-revocation-secs          0
features.locks-revocation-clear-all    false
features.locks-revocation-max-blocked  0
features.locks-monkey-unlocking        false
features.locks-notify-contention        no
features.locks-notify-contention-delay  5
disperse.shd-max-threads                1
disperse.shd-wait-qlength              1024
disperse.cpu-extensions                auto
disperse.self-heal-window-size          1
cluster.use-compound-fops              off
performance.parallel-readdir            off
performance.rda-request-size            131072
performance.rda-low-wmark              4096
performance.rda-high-wmark              128KB
performance.rda-cache-limit            10MB
performance.nl-cache-positive-entry    false
performance.nl-cache-limit              10MB
performance.nl-cache-timeout            60
cluster.brick-multiplex                off
cluster.max-bricks-per-process          250
disperse.optimistic-change-log          on
disperse.stripe-cache                  4
cluster.halo-enabled                    False
cluster.halo-shd-max-latency            99999
cluster.halo-nfsd-max-latency          5
cluster.halo-max-latency                5
cluster.halo-max-replicas              99999
cluster.halo-min-replicas              2
features.selinux                        on
cluster.daemon-log-level                INFO
debug.delay-gen                        off
delay-gen.delay-percentage              10%
delay-gen.delay-duration                100000
delay-gen.enable
disperse.parallel-writes                on
features.sdfs                          off
features.cloudsync                      off
features.ctime                          on
ctime.noatime                          on
feature.cloudsync-storetype            (null)
features.enforce-mandatory-lock        off

What do you think, are there any other knobs worth to be turned?

Thanks!

On Wed, Jul 03, 2019 at 06:55:09PM +0300, Strahil wrote:
> Check the following link (4.1)  for the optimal gluster volume settings.
> They are quite safe.
>
> Gluster  provides a group called  virt (/var/lib/glusterd/groups/virt)  and can be applied via  'gluster volume set VOLNAME group virt'
>
> Then try again.
>
> Best Regards,
> Strahil NikolovOn Jul 3, 2019 11:39, Vladimir Melnik <v.melnik@xxxxxxxx> wrote:
> >
> > Dear colleagues,
> >
> > I have a lab with a bunch of virtual machines (the virtualization is
> > provided by KVM) running on the same physical host. 4 of these VMs are
> > working as a GlusterFS cluster and there's one more VM that works as a
> > client. I'll specify all the packages' versions in the ending of this
> > message.
> >
> > I created 2 volumes - one is having type "Distributed-Replicate" and
> > another one is "Distribute". The problem is that both of volumes are
> > showing really poor performance.
> >
> > Here's what I see on the client:
> > $ mount | grep gluster
> > 10.13.1.16:storage1 on /mnt/glusterfs1 type fuse.glusterfs(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
> > 10.13.1.16:storage2 on /mnt/glusterfs2 type fuse.glusterfs(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
> >
> > $ for i in {1..5}; do { dd if=/dev/zero of=/mnt/glusterfs1/test.tmp bs=1M count=10 oflag=sync; rm -f /mnt/glusterfs1/test.tmp; } done
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.47936 s, 7.1 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.62546 s, 6.5 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.71229 s, 6.1 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.68607 s, 6.2 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.82204 s, 5.8 MB/s
> >
> > $ for i in {1..5}; do { dd if=/dev/zero of=/mnt/glusterfs2/test.tmp bs=1M count=10 oflag=sync; rm -f /mnt/glusterfs2/test.tmp; } done
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.15739 s, 9.1 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.978528 s, 10.7 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.910642 s, 11.5 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.998249 s, 10.5 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 1.03377 s, 10.1 MB/s
> >
> > The distributed one shows a bit better performance than the
> > distributed-replicated one, but it's still poor. :-(
> >
> > The disk storage itself is OK, here's what I see on each of 4 GlusterFS
> > servers:
> > for i in {1..5}; do { dd if=/dev/zero of=/mnt/storage1/test.tmp bs=1M count=10 oflag=sync; rm -f /mnt/storage1/test.tmp; } done
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.0656698 s, 160 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.0476927 s, 220 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.036526 s, 287 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.0329145 s, 319 MB/s
> > 10+0 records in
> > 10+0 records out
> > 10485760 bytes (10 MB) copied, 0.0403988 s, 260 MB/s
> >
> > The network between all 5 VMs is OK, they all are working on the same
> > physical host.
> >
> > Can't understand, what am I doing wrong. :-(
> >
> > Here's the detailed info about the volumes:
> > Volume Name: storage1
> > Type: Distributed-Replicate
> > Volume ID: a42e2554-99e5-4331-bcc4-0900d002ae32
> > Status: Started
> > Snapshot Count: 0
> > Number of Bricks: 2 x (2 + 1) = 6
> > Transport-type: tcp
> > Bricks:
> > Brick1: gluster1.k8s.maitre-d.tucha.ua:/mnt/storage1/brick1
> > Brick2: gluster2.k8s.maitre-d.tucha.ua:/mnt/storage1/brick2
> > Brick3: gluster3.k8s.maitre-d.tucha.ua:/mnt/storage1/brick_arbiter (arbiter)
> > Brick4: gluster3.k8s.maitre-d.tucha.ua:/mnt/storage1/brick3
> > Brick5: gluster4.k8s.maitre-d.tucha.ua:/mnt/storage1/brick4
> > Brick6: gluster1.k8s.maitre-d.tucha.ua:/mnt/storage1/brick_arbiter (arbiter)
> > Options Reconfigured:
> > transport.address-family: inet
> > nfs.disable: on
> > performance.client-io-threads: off
> >
> > Volume Name: storage2
> > Type: Distribute
> > Volume ID: df4d8096-ad03-493e-9e0e-586ce21fb067
> > Status: Started
> > Snapshot Count: 0
> > Number of Bricks: 4
> > Transport-type: tcp
> > Bricks:
> > Brick1: gluster1.k8s.maitre-d.tucha.ua:/mnt/storage2
> > Brick2: gluster2.k8s.maitre-d.tucha.ua:/mnt/storage2
> > Brick3: gluster3.k8s.maitre-d.tucha.ua:/mnt/storage2
> > Brick4: gluster4.k8s.maitre-d.tucha.ua:/mnt/storage2
> > Options Reconfigured:
> > transport.address-family: inet
> > nfs.disable: on
> >
> > The OS is CentOS Linux release 7.6.1810. The packages I'm using are:
> > glusterfs-6.3-1.el7.x86_64
> > glusterfs-api-6.3-1.el7.x86_64
> > glusterfs-cli-6.3-1.el7.x86_64
> > glusterfs-client-xlators-6.3-1.el7.x86_64
> > glusterfs-fuse-6.3-1.el7.x86_64
> > glusterfs-libs-6.3-1.el7.x86_64
> > glusterfs-server-6.3-1.el7.x86_64
> > kernel-3.10.0-327.el7.x86_64
> > kernel-3.10.0-514.2.2.el7.x86_64
> > kernel-3.10.0-957.12.1.el7.x86_64
> > kernel-3.10.0-957.12.2.el7.x86_64
> > kernel-3.10.0-957.21.3.el7.x86_64
> > kernel-tools-3.10.0-957.21.3.el7.x86_64
> > kernel-tools-libs-3.10.0-957.21.3.el7.x86_6
> >
> > Please, be so kind as to help me to understand, did I do it wrong or
> > that's quite normal performance of GlusterFS?
> >
> > Thanks in advance!
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users@xxxxxxxxxxx
> > https://lists.gluster.org/mailman/listinfo/gluster-users


--
V.Melnik

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux