Re: Transport endpoint is not connected

[David Cunningham <dcunningham@xxxxxxxxxxxxx>]

Hello all,

We confirmed that the network provider blocking port 49152 was the issue. Thanks for all the help.

On Thu, 30 May 2019 at 16:11, Strahil <hunter86_bg@xxxxxxxxx> wrote:

You can try to run a ncat from gfs3:

ncat -z -v gfs1 49152
ncat -z -v gfs2 49152

If ncat fails to connect ->  it's definately a firewall.

Best Regards,
Strahil Nikolov

On May 30, 2019 01:33, David Cunningham <dcunningham@xxxxxxxxxxxxx> wrote:

Hi Ravi,

I think it probably is a firewall issue with the network provider. I was hoping to see a specific connection failure message we could send to them, but will take it up with them anyway.

Thanks for your help.

On Wed, 29 May 2019 at 23:10, Ravishankar N <ravishankar@xxxxxxxxxx> wrote:

I don't see a "Connected to gvol0-client-1" in the log.  Perhaps a firewall issue like the last time? Even in the earlier add-brick log from the other email thread, connection to the 2nd brick was not established.

-Ravi

On 29/05/19 2:26 PM, David Cunningham wrote:

Hi Ravi and Joe,

The command "gluster volume status gvol0" shows all 3 nodes as being online, even on gfs3 as below. I've attached the glfsheal-gvol0.log, in which I can't see anything like a connection error. Would you have any further suggestions? Thank you.

[root@gfs3 glusterfs]# gluster volume status gvol0
Status of volume: gvol0
Gluster process                             TCP Port  RDMA Port  Online  Pid
------------------------------------------------------------------------------
Brick gfs1:/nodirectwritedata/gluster/gvol0 49152     0          Y       7706
Brick gfs2:/nodirectwritedata/gluster/gvol0 49152     0          Y       7625
Brick gfs3:/nodirectwritedata/gluster/gvol0 49152     0          Y       7307
Self-heal Daemon on localhost               N/A       N/A        Y       7316
Self-heal Daemon on gfs1                    N/A       N/A        Y       40591
Self-heal Daemon on gfs2                    N/A       N/A        Y       7634
 
Task Status of Volume gvol0
------------------------------------------------------------------------------
There are no active volume tasks

On Wed, 29 May 2019 at 16:26, Ravishankar N <ravishankar@xxxxxxxxxx> wrote:

On 29/05/19 6:21 AM, David Cunningham wrote:

--

David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users