Re: Input/output error on FUSE log

[Matt Waymack <mwaymack@xxxxxxxxx>]

Has anyone any other ideas where to look?  This is only affecting FUSE clients.  SMB clients are unaffected by this problem.

 

Thanks!

 

From: gluster-users-bounces@xxxxxxxxxxx <gluster-users-bounces@xxxxxxxxxxx> On Behalf Of Matt Waymack
Sent: Monday, January 7, 2019 1:19 PM
To: Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx>
Cc: gluster-users@xxxxxxxxxxx List <gluster-users@xxxxxxxxxxx>
Subject: Re: [Gluster-users] Input/output error on FUSE log

 

Attached are the logs from when a failure occurred with diagnostics set to trace.

 

Thank you!

 

From: Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx>
Sent: Saturday, January 5, 2019 8:32 PM
To: Matt Waymack <mwaymack@xxxxxxxxx>
Cc: gluster-users@xxxxxxxxxxx List <gluster-users@xxxxxxxxxxx>
Subject: Re: [Gluster-users] Input/output error on FUSE log

 

 

 

On Sun, Jan 6, 2019 at 7:58 AM Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx> wrote:

 

 

On Sun, Jan 6, 2019 at 4:19 AM Matt Waymack <mwaymack@xxxxxxxxx> wrote:

Hi all,

 

I'm having a problem writing to our volume.  When writing files larger than about 2GB, I get an intermittent issue where the write will fail and return Input/Output error.  This is also shown in the FUSE log of the client (this is affecting all clients).  A snip of a client log is below:

[2019-01-05 22:39:44.581371] W [fuse-bridge.c:2474:fuse_writev_cbk] 0-glusterfs-fuse: 51040978: WRITE => -1 gfid=82a0b5c4-7ef3-43c2-ad86-41e16673d7c2 fd=0x7f949839a368 (Input/output error)

[2019-01-05 22:39:44.598392] W [fuse-bridge.c:1441:fuse_err_cbk] 0-glusterfs-fuse: 51040979: FLUSH() ERR => -1 (Input/output error)

[2019-01-05 22:39:47.420920] W [fuse-bridge.c:2474:fuse_writev_cbk] 0-glusterfs-fuse: 51041266: WRITE => -1 gfid=0e8e1e13-97a5-478a-bc58-e81ddf3698a3 fd=0x7f949809b7f8 (Input/output error)

[2019-01-05 22:39:47.433377] W [fuse-bridge.c:1441:fuse_err_cbk] 0-glusterfs-fuse: 51041267: FLUSH() ERR => -1 (Input/output error)

[2019-01-05 22:39:50.441531] W [fuse-bridge.c:2474:fuse_writev_cbk] 0-glusterfs-fuse: 51041548: WRITE => -1 gfid=0e8e1e13-97a5-478a-bc58-e81ddf3698a3 fd=0x7f949839a368 (Input/output error)

[2019-01-05 22:39:50.451914] W [fuse-bridge.c:1441:fuse_err_cbk] 0-glusterfs-fuse: 51041549: FLUSH() ERR => -1 (Input/output error)

The message "W [MSGID: 109011] [dht-layout.c:163:dht_layout_search] 0-gv1-dht: no subvolume for hash (value) = 1311504267" repeated 1721 times between [2019-01-05 22:39:33.906241] and [2019-01-05 22:39:44.598371]

The message "E [MSGID: 101046] [dht-common.c:1502:dht_lookup_dir_cbk] 0-gv1-dht: dict is null" repeated 1714 times between [2019-01-05 22:39:33.925981] and [2019-01-05 22:39:50.451862]

The message "W [MSGID: 109011] [dht-layout.c:163:dht_layout_search] 0-gv1-dht: no subvolume for hash (value) = 1137142622" repeated 1707 times between [2019-01-05 22:39:39.636552] and [2019-01-05 22:39:50.451895]

 

This looks to be a DHT issue. Some questions:

* Are all subvolumes of DHT up and client is connected to them? Particularly the subvolume which contains the file in question.

* Can you get all extended attributes of parent directory of the file from all bricks?

* set diagnostics.client-log-level to TRACE, capture these errors again and attach the client log file.

 

I spoke a bit early. dht_writev doesn't search hashed subvolume as its already been looked up in lookup. So, these msgs looks to be of a different issue - not  writev failure.

 

 

This is intermittent for most files, but eventually if a file is large enough it will not write.  The workflow is SFTP tot he client which then writes to the volume over FUSE.  When files get to a certain point,w e can no longer write to them.  The file sizes are different as well, so it's not like they all get to the same size and just stop either.  I've ruled out a free space issue, our files at their largest are only a few hundred GB and we have tens of terrabytes free on each brick.  We are also sharding at 1GB.

 

I'm not sure where to go from here as the error seems vague and I can only see it on the client log.  I'm not seeing these errors on the nodes themselves.  This is also seen if I mount the volume via FUSE on any of the nodes as well and it is only reflected in the FUSE log.

 

Here is the volume info:

Volume Name: gv1

Type: Distributed-Replicate

Volume ID: 1472cc78-e2a0-4c3f-9571-dab840239b3c

Status: Started

Snapshot Count: 0

Number of Bricks: 8 x (2 + 1) = 24

Transport-type: tcp

Bricks:

Brick1: tpc-glus4:/exp/b1/gv1

Brick2: tpc-glus2:/exp/b1/gv1

Brick3: tpc-arbiter1:/exp/b1/gv1 (arbiter)

Brick4: tpc-glus2:/exp/b2/gv1

Brick5: tpc-glus4:/exp/b2/gv1

Brick6: tpc-arbiter1:/exp/b2/gv1 (arbiter)

Brick7: tpc-glus4:/exp/b3/gv1

Brick8: tpc-glus2:/exp/b3/gv1

Brick9: tpc-arbiter1:/exp/b3/gv1 (arbiter)

Brick10: tpc-glus4:/exp/b4/gv1

Brick11: tpc-glus2:/exp/b4/gv1

Brick12: tpc-arbiter1:/exp/b4/gv1 (arbiter)

Brick13: tpc-glus1:/exp/b5/gv1

Brick14: tpc-glus3:/exp/b5/gv1

Brick15: tpc-arbiter2:/exp/b5/gv1 (arbiter)

Brick16: tpc-glus1:/exp/b6/gv1

Brick17: tpc-glus3:/exp/b6/gv1

Brick18: tpc-arbiter2:/exp/b6/gv1 (arbiter)

Brick19: tpc-glus1:/exp/b7/gv1

Brick20: tpc-glus3:/exp/b7/gv1

Brick21: tpc-arbiter2:/exp/b7/gv1 (arbiter)

Brick22: tpc-glus1:/exp/b8/gv1

Brick23: tpc-glus3:/exp/b8/gv1

Brick24: tpc-arbiter2:/exp/b8/gv1 (arbiter)

Options Reconfigured:

performance.cache-samba-metadata: on

performance.cache-invalidation: off

features.shard-block-size: 1000MB

features.shard: on

transport.address-family: inet

nfs.disable: on

cluster.lookup-optimize: on

 

I'm a bit stumped on this, any help is appreciated.  Thank you!

 

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users