|
Hi Krutika,
Thanks for the info.
After a long time the preallocated disk has been created
properly. It was a 1TB disk on a hdd pool so a bit of delay was
expected.
But it took a bit longer then expected. The disk had no other
virtual disks on it. Is there something I can tweak or check for
this?
Regards, Jorick
On 10/31/2018 01:10 PM, Krutika
Dhananjay wrote:
These log messages represent a transient state and are
harmless and can be ignored. This happens when a lookup and
mknod to create shards happen in parallel.
Regarding the preallocated disk creation issue, could you
check if there are any errors/warnings in the fuse mount logs
(these are named as the hyphenated mountpoint name followed by
a ".log" and are found under /var/log/glusterfs).
-Krutika
Hi,
I have the similar issues with ovirt 4.2 on a
glusterfs-3.8.15 cluster. This was a new volume and I
created first a thin provisioned disk, then I tried to
create a preallocated disk but it hangs after 4MB. The
only issue I can find in the logs sofar are the [File
exists] errors with the sharding.
The message "W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125365
->
/data/hdd2/brick1/.glusterfs/16/a1/16a18a01-4f77-4c37-923d-9f0bc59f5cc7failed
[File exists]" repeated 2 times between [2018-10-31
10:46:33.810987] and [2018-10-31 10:46:33.810988]
[2018-10-31 10:46:33.970949] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125366
->
/data/hdd2/brick1/.glusterfs/90/85/9085ea11-4089-4d10-8848-fa2d518fd86dfailed
[File exists]
[2018-10-31 10:46:33.970950] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125366
->
/data/hdd2/brick1/.glusterfs/90/85/9085ea11-4089-4d10-8848-fa2d518fd86dfailed
[File exists]
[2018-10-31 10:46:35.601064] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125369
->
/data/hdd2/brick1/.glusterfs/9b/eb/9bebaaac-f460-496f-b30d-aabe77bffbc8failed
[File exists]
[2018-10-31 10:46:35.601065] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125369
->
/data/hdd2/brick1/.glusterfs/9b/eb/9bebaaac-f460-496f-b30d-aabe77bffbc8failed
[File exists]
[2018-10-31 10:46:36.040564] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125370
->
/data/hdd2/brick1/.glusterfs/30/93/3093fdb6-e62c-48b8-90e7-d4d72036fb69failed
[File exists]
[2018-10-31 10:46:36.040565] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125370
->
/data/hdd2/brick1/.glusterfs/30/93/3093fdb6-e62c-48b8-90e7-d4d72036fb69failed
[File exists]
[2018-10-31 10:46:36.319247] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125372
->
/data/hdd2/brick1/.glusterfs/c3/c2/c3c272f5-50af-4e82-94bb-b76eaa7a9a39failed
[File exists]
[2018-10-31 10:46:36.319250] W [MSGID: 113096]
[posix-handle.c:761:posix_handle_hard] 0-hdd2-posix:
link
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125372
->
/data/hdd2/brick1/.glusterfs/c3/c2/c3c272f5-50af-4e82-94bb-b76eaa7a9a39failed
[File exists]
[2018-10-31 10:46:36.319309] E [MSGID: 113020]
[posix.c:1407:posix_mknod] 0-hdd2-posix: setting gfid on
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125372
failed
-rw-rw----. 2 root root 4194304 Oct 31 11:46
/data/hdd2/brick1/.shard/6573a019-dba5-4f97-bca9-0a00ce537318.125366
-rw-rw----. 2 root root 4194304 Oct 31 11:46
/data/hdd2/brick1/.glusterfs/9b/eb/9bebaaac-f460-496f-b30d-aabe77bffbc8
On
10/01/2018 12:36 PM, Jose V. Carrión wrote:
Hi,
I have a gluster 3.12.6-1 installation with 2
configured volumes.
Several times at day , some bricks are reporting
the lines below:
[2018-09-30 20:36:27.348015] W [MSGID: 113096]
[posix-handle.c:770:posix_handle_hard]
0-volumedisk0-posix: link
/mnt/glusterfs/vol0/brick1/6349/20180921/20180921.h5
->
/mnt/glusterfs/vol0/brick1/.glusterfs/3b/1c/3b1c5fe1-b141-4687-8eaf-2c28f9505277failed
[File exists]
[2018-09-30 20:36:27.383957] E [MSGID: 113020]
[posix.c:3162:posix_create] 0-volumedisk0-posix:
setting gfid on
/mnt/glusterfs/vol0/brick1/6349/20180921/20180921.h5
failed
I can access to the
/mnt/glusterfs/vol0/brick1/6349/20180921/20180921.h5
and
/mnt/glusterfs/vol0/brick1/.glusterfs/3b/1c/3b1c5fe1-b141-4687-8eaf-2c28f9505277,
both files are hard links .
What is the meaning of the error lines?
Thanks in advance.
Cheers.
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
Met vriendelijke groet, With kind regards,
Jorick Astrego
Netbulae Virtualization Experts
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
Met vriendelijke groet, With kind regards,
Jorick Astrego
Netbulae Virtualization Experts
| Tel: 053 20 30 270 | info@xxxxxxxxxxx | Staalsteden 4-3A | KvK 08198180 | | Fax: 053 20 30 271 | www.netbulae.eu | 7547 TA Enschede | BTW NL821234584B01 |
|
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
