Re: Rebalance failed on Distributed Disperse volume based on 3.12.14 version

[Mauro Tridici <mauro.tridici@xxxxxxx>]

Hi Ashish,

the rebalance is still running. It moved about 49.3 TB of 78 TB (estimated).

The initial amount of data saved on the s01, s02 and s03 servers was about 156TB, so I think that half of 156TB (78TB) should be moved to the new 3 servers (s04, s05 and s06).

[root@s01 status]# gluster volume rebalance tier2 status

                                    Node Rebalanced-files          size       scanned      failures       skipped               status  run time in h:m:s

                               ---------      -----------   -----------   -----------   -----------   -----------         ------------     --------------

                               localhost           553955        20.3TB       2356786             0         61942          in progress       57:42:14

                                 s02-stg           293175        14.8TB        976960             0         30489          in progress       57:42:15

                                 s03-stg           293758        14.2TB        990518             0         30464          in progress       57:42:15

                                 s04-stg                0        0Bytes             0             0             0               failed        0:00:37

                                 s05-stg                0        0Bytes             0             0             0            completed       48:33:03

                                 s06-stg                0        0Bytes             0             0             0            completed       48:33:02

Estimated time left for rebalance to complete :      981:23:02

volume rebalance: tier2: success

In attachment you will find the outputs required.

Thank you,

Mauro

Attachment: bricks_attr.tar.gz
Description: GNU Zip compressed data

Il giorno 08 ott 2018, alle ore 11:44, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:

Hi Mauro,

What is the status of rebalace now?

Could you please give output of following for all the bricks -

getfattr -m. -d -e hex <root path of athe brick>

You have to go to all the nodes and for all the bricks on that node you have to run above command.

Example: on s01

getfattr -m. -d -e hex /gluster/mnt1/brick

Keep output from one node in one file si that it will be easy to analyze.

---

Ashish

---

From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "Nithya Balachandran" <nbalacha@xxxxxxxxxx>
Cc: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Monday, October 8, 2018 2:27:35 PM
Subject: Re: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version

Hi Nithya,

thank you, my answers are in lines.

Il giorno 08 ott 2018, alle ore 10:43, Nithya Balachandran <nbalacha@xxxxxxxxxx> ha scritto:

Hi Mauro,

Yes, a rebalance consists of 2 operations for every directory:

1. Fix the layout for the new volume config (newly added or removed bricks)
   
2. Migrate files to their new hashed subvols based on the new layout
   

Are you running a rebalance because you added new bricks to the volume ? As per an earlier email you have already run a fix-layout.

Yes, we added new bricks to the volume and we already executed fix-layout before.

On s04, please check the rebalance log file to see why the rebalance failed.

On s04, rebalance failed after the following errors (before these lines no errors were found):

[2018-10-06 00:13:37.359634] I [MSGID: 109063] [dht-layout.c:716:dht_layout_normalize] 0-tier2-dht: Found anomalies in / (gfid = 00000000-0000-0000-0000-000000000001). Holes=2 overlaps=0

[2018-10-06 00:13:37.362424] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.362504] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-7: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.362525] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-7: Failed to update version and size [Input/output error]

[2018-10-06 00:13:37.363105] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.363163] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-8: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.363180] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-8: Failed to update version and size [Input/output error]

[2018-10-06 00:13:37.364920] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.364969] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-11: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.364985] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-11: Failed to update version and size [Input/output error]

[2018-10-06 00:13:37.366864] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.366912] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-6: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.366926] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-6: Failed to update version and size [Input/output error]

[2018-10-06 00:13:37.374818] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.374866] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-9: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.374879] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-9: Failed to update version and size [Input/output error]

[2018-10-06 00:13:37.406076] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-06 00:13:37.406145] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-10: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:37.406183] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-10: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.039835] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.039911] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-11, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.039944] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-11: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.039958] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-11: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.040441] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.040480] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-7, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.040518] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-7: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.040534] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-7: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.061789] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.061830] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-9, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.061859] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-9: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.061873] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-9: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.062283] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.062323] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-8, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.062353] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-8: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.062367] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-8: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.064613] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.064655] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-6, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.064685] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-6: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.064700] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-6: Failed to update version and size [Input/output error]

[2018-10-06 00:13:51.064727] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-06 00:13:51.064766] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-10, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:13:51.064794] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-10: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:51.064815] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-10: Failed to update version and size [Input/output error]

[2018-10-06 00:13:53.695948] I [dht-rebalance.c:4512:gf_defrag_start_crawl] 0-tier2-dht: gf_defrag_start_crawl using commit hash 3720343841

[2018-10-06 00:13:53.696837] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-06 00:13:53.696906] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-11: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:53.696924] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-11: Failed to update version and size [Input/output error]

[2018-10-06 00:13:53.697549] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-06 00:13:53.697599] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-7: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:53.697620] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-7: Failed to update version and size [Input/output error]

[2018-10-06 00:13:53.704120] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-06 00:13:53.704262] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-8: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:53.704342] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-8: Failed to update version and size [Input/output error]

[2018-10-06 00:13:53.707260] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-06 00:13:53.707312] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-10: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:53.707329] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-10: Failed to update version and size [Input/output error]

[2018-10-06 00:13:53.718301] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-06 00:13:53.718350] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-6: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:53.718367] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-6: Failed to update version and size [Input/output error]

[2018-10-06 00:13:55.626130] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-06 00:13:55.626207] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-9: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:13:55.626228] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-9: Failed to update version and size [Input/output error]

[2018-10-06 00:13:55.626231] I [MSGID: 109081] [dht-common.c:4379:dht_setxattr] 0-tier2-dht: fixing the layout of /

[2018-10-06 00:13:55.862374] I [dht-rebalance.c:5063:gf_defrag_status_get] 0-glusterfs: TIME: Estimated total time to complete (size)= 0 seconds, seconds left = 0

[2018-10-06 00:13:55.862440] I [MSGID: 109028] [dht-rebalance.c:5143:gf_defrag_status_get] 0-glusterfs: Rebalance is in progress. Time taken is 20.00 secs

[2018-10-06 00:13:55.862460] I [MSGID: 109028] [dht-rebalance.c:5147:gf_defrag_status_get] 0-glusterfs: Files migrated: 0, size: 0, lookups: 0, failures: 0, skipped: 0

[2018-10-06 00:14:12.476927] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.477020] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-11, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.477077] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-11: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.477094] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-11: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.477644] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.477695] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-7, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.477726] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-7: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.477740] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-7: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.477853] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.477894] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-8, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.477923] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-8: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.477937] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-8: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.486862] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.486902] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-6, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.486929] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-6: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.486944] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-6: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.493872] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.493912] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-10, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.493939] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-10: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.493954] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-10: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.494560] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.494598] E [MSGID: 109006] [dht-selfheal.c:673:dht_selfheal_dir_xattr_cbk] 0-tier2-dht: layout setxattr failed on tier2-disperse-9, path:/ gfid:00000000-0000-0000-0000-000000000001 [Input/output error]

[2018-10-06 00:14:12.494624] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-9: Insufficient available children for this request (have 0, need 4)

[2018-10-06 00:14:12.494640] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-9: Failed to update version and size [Input/output error]

[2018-10-06 00:14:12.795320] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.795366] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.795796] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.795834] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.804770] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.804803] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.804811] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.804850] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.808500] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.808563] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.812431] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-06 00:14:12.812468] E [MSGID: 109039] [dht-common.c:3113:dht_find_local_subvol_cbk] 0-tier2-dht: getxattr err for dir [Input/output error]

[2018-10-06 00:14:12.812497] E [MSGID: 0] [dht-rebalance.c:4336:dht_get_local_subvols_and_nodeuuids] 0-tier2-dht: local subvolume determination failed with error: 5 [Input/output error]

[2018-10-06 00:14:12.812700] I [MSGID: 109028] [dht-rebalance.c:5143:gf_defrag_status_get] 0-tier2-dht: Rebalance is failed. Time taken is 37.00 secs

[2018-10-06 00:14:12.812720] I [MSGID: 109028] [dht-rebalance.c:5147:gf_defrag_status_get] 0-tier2-dht: Files migrated: 0, size: 0, lookups: 0, failures: 0, skipped: 0

[2018-10-06 00:14:12.812870] W [glusterfsd.c:1375:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7e25) [0x7efe75d18e25] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x5623973d64b5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x5623973d632b] ) 0-: received signum (15), shutting down

Regards,

Mauro

Regards,

Nithya

On 8 October 2018 at 13:22, Mauro Tridici <mauro.tridici@xxxxxxx> wrote:

Hi All,

for your information, this is the current rebalance status:

[root@s01 ~]# gluster volume rebalance tier2 status

                                    Node Rebalanced-files          size       scanned      failures       skipped               status  run time in h:m:s

                               ---------      -----------   -----------   -----------   -----------   -----------         ------------     --------------

                               localhost           551922        20.3TB       2349397             0         61849          in progress       55:25:38

                                 s02-stg           287631        13.2TB        959954             0         30262          in progress       55:25:39

                                 s03-stg           288523        12.7TB        973111             0         30220          in progress       55:25:39

                                 s04-stg                0        0Bytes             0             0             0               failed        0:00:37

                                 s05-stg                0        0Bytes             0             0             0            completed       48:33:03

                                 s06-stg                0        0Bytes             0             0             0            completed       48:33:02

Estimated time left for rebalance to complete :     1023:49:56

volume rebalance: tier2: success

Rebalance is migrating files on s05, s06 servers and on s04 too (although it is marked as failed).

s05 and s06 tasks are completed.

Questions:

1) it seems that rebalance is moving files, but it is fixing the layout also, is it normal?

2) when rebalance will be completed, what we need to do before return the gluster storage to the users? We have to launch rebalance again in order to involve s04 server too or a fix-layout to eventually fix some error on s04?

Thank you very much,

Mauro

Il giorno 07 ott 2018, alle ore 10:29, Mauro Tridici <mauro.tridici@xxxxxxx> ha scritto:

Hi All,

some important updates about the issue mentioned below.

After rebalance failed on all the servers, I decided to:

- stop gluster volume

- reboot the servers

- start gluster volume

- change some gluster volume options

- start the rebalance again

The options that I changed are listed below after reading some threads on gluster users mailing list:

BEFORE CHANGE:

gluster volume set tier2 network.ping-timeout 02

gluster volume set all cluster.brick-multiplex on

gluster volume set tier2 cluster.server-quorum-ratio 51%

gluster volume set tier2 cluster.server-quorum-type server

gluster volume set tier2 cluster.quorum-type auto

AFTER CHANGE:

gluster volume set tier2 network.ping-timeout 42

gluster volume set all cluster.brick-multiplex off

gluster volume set tier2 cluster.server-quorum-ratio none

gluster volume set tier2 cluster.server-quorum-type none

gluster volume set tier2 cluster.quorum-type none

The result was that rebalance starts moving data from s01, s02 ed s03 servers to s05 and s06 servers (the new added ones), but it failed on s04 server after 37 seconds.

The rebalance is still running and moving data as you can see from the output:

[root@s01 ~]# gluster volume rebalance tier2 status

                                    Node Rebalanced-files          size       scanned      failures       skipped               status  run time in h:m:s

                               ---------      -----------   -----------   -----------   -----------   -----------         ------------     --------------

                               localhost           286680        12.6TB       1217960             0         43343          in progress       32:10:24

                                 s02-stg           126291        12.4TB        413077             0         21932          in progress       32:10:25

                                 s03-stg           126516        11.9TB        433014             0         21870          in progress       32:10:25

                                 s04-stg                0        0Bytes             0             0             0               failed        0:00:37

                                 s05-stg                0        0Bytes             0             0             0          in progress       32:10:25

                                 s06-stg                0        0Bytes             0             0             0          in progress       32:10:25

Estimated time left for rebalance to complete :      624:47:48

volume rebalance: tier2: success

When rebalance will be completed, we are planning to re-launch it to try to involve s04 server also.

Do you have some idea about what happened in my previous message and why, now, rebalance it’s running although it’s not involve s04 server?

In attachment the complete tier2-rebalance.log  file related to s04 server.

Thank you very much for your help,

Mauro

<tier2-rebalance.log.gz>

Il giorno 06 ott 2018, alle ore 02:01, Mauro Tridici <mauro.tridici@xxxxxxx> ha scritto:

Hi All,

since we need to restore gluster storage as soon as possible, we decided to ignore the few files that could be lost and to go ahead.

So we cleaned all bricks content of servers s04, s05 and s06.

As planned some days ago, we executed the following commands:

gluster peer detach s04

gluster peer detach s05

gluster peer detach s06

gluster peer probe s04

gluster peer probe s05

gluster peer probe s06

gluster volume add-brick tier2 s04-stg:/gluster/mnt1/brick s05-stg:/gluster/mnt1/brick s06-stg:/gluster/mnt1/brick s04-stg:/gluster/mnt2/brick s05-stg:/gluster/mnt2/brick s06-stg:/gluster/mnt2/brick s04-stg:/gluster/mnt3/brick s05-stg:/gluster/mnt3/brick s06-stg:/gluster/mnt3/brick s04-stg:/gluster/mnt4/brick s05-stg:/gluster/mnt4/brick s06-stg:/gluster/mnt4/brick s04-stg:/gluster/mnt5/brick s05-stg:/gluster/mnt5/brick s06-stg:/gluster/mnt5/brick s04-stg:/gluster/mnt6/brick s05-stg:/gluster/mnt6/brick s06-stg:/gluster/mnt6/brick s04-stg:/gluster/mnt7/brick s05-stg:/gluster/mnt7/brick s06-stg:/gluster/mnt7/brick s04-stg:/gluster/mnt8/brick s05-stg:/gluster/mnt8/brick s06-stg:/gluster/mnt8/brick s04-stg:/gluster/mnt9/brick s05-stg:/gluster/mnt9/brick s06-stg:/gluster/mnt9/brick s04-stg:/gluster/mnt10/brick s05-stg:/gluster/mnt10/brick s06-stg:/gluster/mnt10/brick s04-stg:/gluster/mnt11/brick s05-stg:/gluster/mnt11/brick s06-stg:/gluster/mnt11/brick s04-stg:/gluster/mnt12/brick s05-stg:/gluster/mnt12/brick s06-stg:/gluster/mnt12/brick force

gluster volume rebalance tier2 fix-layout start

Everything seem to be fine and fix-layout ended.

[root@s01 ~]# gluster volume rebalance tier2 status 

                               Node                                    status           run time in h:m:s

                          ---------                               -----------                ------------

                          localhost                               fix-layout completed       12:11:6

                            s02-stg                               fix-layout completed       12:11:18

                            s03-stg                               fix-layout completed       12:11:12

                            s04-stg                               fix-layout completed       12:11:20

                            s05-stg                               fix-layout completed       12:11:14

                            s06-stg                               fix-layout completed       12:10:47

volume rebalance: tier2: success

[root@s01 ~]# gluster volume info

 

Volume Name: tier2

Type: Distributed-Disperse

Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c

Status: Started

Snapshot Count: 0

Number of Bricks: 12 x (4 + 2) = 72

Transport-type: tcp

Bricks:

Brick1: s01-stg:/gluster/mnt1/brick

Brick2: s02-stg:/gluster/mnt1/brick

Brick3: s03-stg:/gluster/mnt1/brick

Brick4: s01-stg:/gluster/mnt2/brick

Brick5: s02-stg:/gluster/mnt2/brick

Brick6: s03-stg:/gluster/mnt2/brick

Brick7: s01-stg:/gluster/mnt3/brick

Brick8: s02-stg:/gluster/mnt3/brick

Brick9: s03-stg:/gluster/mnt3/brick

Brick10: s01-stg:/gluster/mnt4/brick

Brick11: s02-stg:/gluster/mnt4/brick

Brick12: s03-stg:/gluster/mnt4/brick

Brick13: s01-stg:/gluster/mnt5/brick

Brick14: s02-stg:/gluster/mnt5/brick

Brick15: s03-stg:/gluster/mnt5/brick

Brick16: s01-stg:/gluster/mnt6/brick

Brick17: s02-stg:/gluster/mnt6/brick

Brick18: s03-stg:/gluster/mnt6/brick

Brick19: s01-stg:/gluster/mnt7/brick

Brick20: s02-stg:/gluster/mnt7/brick

Brick21: s03-stg:/gluster/mnt7/brick

Brick22: s01-stg:/gluster/mnt8/brick

Brick23: s02-stg:/gluster/mnt8/brick

Brick24: s03-stg:/gluster/mnt8/brick

Brick25: s01-stg:/gluster/mnt9/brick

Brick26: s02-stg:/gluster/mnt9/brick

Brick27: s03-stg:/gluster/mnt9/brick

Brick28: s01-stg:/gluster/mnt10/brick

Brick29: s02-stg:/gluster/mnt10/brick

Brick30: s03-stg:/gluster/mnt10/brick

Brick31: s01-stg:/gluster/mnt11/brick

Brick32: s02-stg:/gluster/mnt11/brick

Brick33: s03-stg:/gluster/mnt11/brick

Brick34: s01-stg:/gluster/mnt12/brick

Brick35: s02-stg:/gluster/mnt12/brick

Brick36: s03-stg:/gluster/mnt12/brick

Brick37: s04-stg:/gluster/mnt1/brick

Brick38: s05-stg:/gluster/mnt1/brick

Brick39: s06-stg:/gluster/mnt1/brick

Brick40: s04-stg:/gluster/mnt2/brick

Brick41: s05-stg:/gluster/mnt2/brick

Brick42: s06-stg:/gluster/mnt2/brick

Brick43: s04-stg:/gluster/mnt3/brick

Brick44: s05-stg:/gluster/mnt3/brick

Brick45: s06-stg:/gluster/mnt3/brick

Brick46: s04-stg:/gluster/mnt4/brick

Brick47: s05-stg:/gluster/mnt4/brick

Brick48: s06-stg:/gluster/mnt4/brick

Brick49: s04-stg:/gluster/mnt5/brick

Brick50: s05-stg:/gluster/mnt5/brick

Brick51: s06-stg:/gluster/mnt5/brick

Brick52: s04-stg:/gluster/mnt6/brick

Brick53: s05-stg:/gluster/mnt6/brick

Brick54: s06-stg:/gluster/mnt6/brick

Brick55: s04-stg:/gluster/mnt7/brick

Brick56: s05-stg:/gluster/mnt7/brick

Brick57: s06-stg:/gluster/mnt7/brick

Brick58: s04-stg:/gluster/mnt8/brick

Brick59: s05-stg:/gluster/mnt8/brick

Brick60: s06-stg:/gluster/mnt8/brick

Brick61: s04-stg:/gluster/mnt9/brick

Brick62: s05-stg:/gluster/mnt9/brick

Brick63: s06-stg:/gluster/mnt9/brick

Brick64: s04-stg:/gluster/mnt10/brick

Brick65: s05-stg:/gluster/mnt10/brick

Brick66: s06-stg:/gluster/mnt10/brick

Brick67: s04-stg:/gluster/mnt11/brick

Brick68: s05-stg:/gluster/mnt11/brick

Brick69: s06-stg:/gluster/mnt11/brick

Brick70: s04-stg:/gluster/mnt12/brick

Brick71: s05-stg:/gluster/mnt12/brick

Brick72: s06-stg:/gluster/mnt12/brick

Options Reconfigured:

network.ping-timeout: 42

features.scrub: Active

features.bitrot: on

features.inode-quota: on

features.quota: on

performance.client-io-threads: on

cluster.min-free-disk: 10

cluster.quorum-type: none

transport.address-family: inet

nfs.disable: on

server.event-threads: 4

client.event-threads: 4

cluster.lookup-optimize: on

performance.readdir-ahead: on

performance.parallel-readdir: off

cluster.readdir-optimize: on

features.cache-invalidation: on

features.cache-invalidation-timeout: 600

performance.stat-prefetch: on

performance.cache-invalidation: on

performance.md-cache-timeout: 600

network.inode-lru-limit: 50000

performance.io-cache: off

disperse.cpu-extensions: auto

performance.io-thread-count: 16

features.quota-deem-statfs: on

features.default-soft-limit: 90

cluster.server-quorum-type: none

diagnostics.latency-measurement: on

diagnostics.count-fop-hits: on

cluster.brick-multiplex: off

cluster.server-quorum-ratio: 51%

The last step should be the data rebalance between the servers, but rebalance failed soon with a lot of errors like the following ones:

[2018-10-05 23:48:38.644978] I [MSGID: 114035] [client-handshake.c:202:client_set_lk_version_cbk] 0-tier2-client-70: Server lk version = 1

[2018-10-05 23:48:44.735323] I [dht-rebalance.c:4512:gf_defrag_start_crawl] 0-tier2-dht: gf_defrag_start_crawl using commit hash 3720331860

[2018-10-05 23:48:44.736205] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-7: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.736266] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-7: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.736282] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-7: Failed to update version and size [Input/output error]

[2018-10-05 23:48:44.736377] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-8: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.736436] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-8: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.736459] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-8: Failed to update version and size [Input/output error]

[2018-10-05 23:48:44.736460] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-10: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.736537] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-9: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.736571] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-10: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.736574] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-9: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.736604] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-9: Failed to update version and size [Input/output error]

[2018-10-05 23:48:44.736604] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-10: Failed to update version and size [Input/output error]

[2018-10-05 23:48:44.736827] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-11: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.736887] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-11: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.736904] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-11: Failed to update version and size [Input/output error]

[2018-10-05 23:48:44.740337] W [MSGID: 122040] [ec-common.c:1097:ec_prepare_update_cbk] 0-tier2-disperse-6: Failed to get size and version [Input/output error]

[2018-10-05 23:48:44.740381] E [MSGID: 122034] [ec-common.c:613:ec_child_select] 0-tier2-disperse-6: Insufficient available children for this request (have 0, need 4)

[2018-10-05 23:48:44.740394] E [MSGID: 122037] [ec-common.c:2040:ec_update_size_version_done] 0-tier2-disperse-6: Failed to update version and size [Input/output error]

[2018-10-05 23:48:50.066103] I [MSGID: 109081] [dht-common.c:4379:dht_setxattr] 0-tier2-dht: fixing the layout of /

In attachment you can find the first logs captured during the rebalance execution.

In your opinion, is there a way to restore the gluster storage or all the data have been lost?

Thank you in advance,

Mauro

<rebalance_log.txt>

Il giorno 04 ott 2018, alle ore 15:31, Mauro Tridici <mauro.tridici@xxxxxxx> ha scritto:

Hi Nithya,

thank you very much.

This is the current “gluster volume info” output after removing bricks (and after peer detach command).

[root@s01 ~]# gluster volume info

 

Volume Name: tier2

Type: Distributed-Disperse

Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c

Status: Started

Snapshot Count: 0

Number of Bricks: 6 x (4 + 2) = 36

Transport-type: tcp

Bricks:

Brick1: s01-stg:/gluster/mnt1/brick

Brick2: s02-stg:/gluster/mnt1/brick

Brick3: s03-stg:/gluster/mnt1/brick

Brick4: s01-stg:/gluster/mnt2/brick

Brick5: s02-stg:/gluster/mnt2/brick

Brick6: s03-stg:/gluster/mnt2/brick

Brick7: s01-stg:/gluster/mnt3/brick

Brick8: s02-stg:/gluster/mnt3/brick

Brick9: s03-stg:/gluster/mnt3/brick

Brick10: s01-stg:/gluster/mnt4/brick

Brick11: s02-stg:/gluster/mnt4/brick

Brick12: s03-stg:/gluster/mnt4/brick

Brick13: s01-stg:/gluster/mnt5/brick

Brick14: s02-stg:/gluster/mnt5/brick

Brick15: s03-stg:/gluster/mnt5/brick

Brick16: s01-stg:/gluster/mnt6/brick

Brick17: s02-stg:/gluster/mnt6/brick

Brick18: s03-stg:/gluster/mnt6/brick

Brick19: s01-stg:/gluster/mnt7/brick

Brick20: s02-stg:/gluster/mnt7/brick

Brick21: s03-stg:/gluster/mnt7/brick

Brick22: s01-stg:/gluster/mnt8/brick

Brick23: s02-stg:/gluster/mnt8/brick

Brick24: s03-stg:/gluster/mnt8/brick

Brick25: s01-stg:/gluster/mnt9/brick

Brick26: s02-stg:/gluster/mnt9/brick

Brick27: s03-stg:/gluster/mnt9/brick

Brick28: s01-stg:/gluster/mnt10/brick

Brick29: s02-stg:/gluster/mnt10/brick

Brick30: s03-stg:/gluster/mnt10/brick

Brick31: s01-stg:/gluster/mnt11/brick

Brick32: s02-stg:/gluster/mnt11/brick

Brick33: s03-stg:/gluster/mnt11/brick

Brick34: s01-stg:/gluster/mnt12/brick

Brick35: s02-stg:/gluster/mnt12/brick

Brick36: s03-stg:/gluster/mnt12/brick

Options Reconfigured:

network.ping-timeout: 0

features.scrub: Active

features.bitrot: on

features.inode-quota: on

features.quota: on

performance.client-io-threads: on

cluster.min-free-disk: 10

cluster.quorum-type: auto

transport.address-family: inet

nfs.disable: on

server.event-threads: 4

client.event-threads: 4

cluster.lookup-optimize: on

performance.readdir-ahead: on

performance.parallel-readdir: off

cluster.readdir-optimize: on

features.cache-invalidation: on

features.cache-invalidation-timeout: 600

performance.stat-prefetch: on

performance.cache-invalidation: on

performance.md-cache-timeout: 600

network.inode-lru-limit: 50000

performance.io-cache: off

disperse.cpu-extensions: auto

performance.io-thread-count: 16

features.quota-deem-statfs: on

features.default-soft-limit: 90

cluster.server-quorum-type: server

diagnostics.latency-measurement: on

diagnostics.count-fop-hits: on

cluster.brick-multiplex: on

cluster.server-quorum-ratio: 51%

Regards,

Mauro

Il giorno 04 ott 2018, alle ore 15:22, Nithya Balachandran <nbalacha@xxxxxxxxxx> ha scritto:

Hi Mauro,

The files on s04 and s05 can be deleted safely as long as those bricks have been removed from the volume and their brick processes are not running.

.glusterfs/indices/xattrop/xattrop-* are links to files that need to be healed.
.glusterfs/quarantine/stub-00000000-0000-0000-0000-000000000008 links to files that bitrot (if enabled)says are corrupted. (none in this case)

I will get back to you on s06. Can you please provide the output of gluster volume info again?

Regards,

Nithya

On 4 October 2018 at 13:47, Mauro Tridici <mauro.tridici@xxxxxxx> wrote:

Dear Ashish, Dear Nithya,

I’m writing this message only to summarize and simplify the information about the "not migrated” files left on removed bricks on server s04, s05 and s06.

In attachment, you can find 3 files (1 file for each server) containing the “not migrated” files lists and related brick number.

In particular:

• s04 and s05 bricks contain only not migrated files in hidden directories “/gluster/mnt#/brick/.glusterfs" (I could delete them, doesn’t it?)
• s06 bricks contain 
• not migrated files in hidden directories “/gluster/mnt#/brick/.glusterfs”;
• not migrated files with size equal to 0;
• not migrated files with size greater than 0.

I think it was necessary to collect and summarize information to simplify your analysis.

Thank you very much,

Mauro

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users