Re: Rebalance failed on Distributed Disperse volume based on 3.12.14 version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi Nithya,

I just shared the log file using google drive.
Please, click on the following link:


Many thanks,
Mauro


Il giorno 28 set 2018, alle ore 13:11, Mauro Tridici <mauro.tridici@xxxxxxx> ha scritto:


Hi Nithya,

the gzip file containing logs is about 14MB.
How can I send it to you? Is there a FTP server or something similar?

Thank you for your support,
Mauro

Il giorno 28 set 2018, alle ore 13:01, Nithya Balachandran <nbalacha@xxxxxxxxxx> ha scritto:

Hi Mauro,


Please send the rebalance logs from s04-stg. I will take a look and get back.


Regards,
Nithya

On 28 September 2018 at 16:21, Mauro Tridici <mauro.tridici@xxxxxxx> wrote:

Hi Ashish,

as I said in my previous message, we adopted the first approach you suggested (setting network.ping-timeout option to 0).
This choice was due to the absence of empty brick to be used as indicated in the second approach.

So, we launched remove-brick command on the first subvolume (V1, bricks 1,2,3,4,5,6 on server s04).
Rebalance started moving the data across the other bricks, but, after about 3TB of moved data, rebalance speed slowed down and some transfer errors appeared in the rebalance.log of server s04.
At this point, since remaining 1,8TB need to be moved in order to complete the step, we decided to stop the remove-brick execution and start it again (I hope it doesn’t stop again before complete the rebalance)

Now rebalance is not moving data, it’s only scanning files (please, take a look to the following output)

[root@s01 ~]# gluster volume remove-brick tier2 s04-stg:/gluster/mnt1/brick s04-stg:/gluster/mnt2/brick s04-stg:/gluster/mnt3/brick s04-stg:/gluster/mnt4/brick s04-stg:/gluster/mnt5/brick s04-stg:/gluster/mnt6/brick status
                                    Node Rebalanced-files          size       scanned      failures       skipped               status  run time in h:m:s
                               ---------      -----------   -----------   -----------   -----------   -----------         ------------     --------------
                                 s04-stg                0        0Bytes        182008             0             0          in progress        3:08:09
Estimated time left for rebalance to complete :      442:45:06

If I’m not wrong, remove-brick rebalances entire cluster each time it start.
Is there a way to speed up this procedure? Do you have some other suggestion that, in this particular case, could be useful to reduce errors (I know that they are related to the current volume configuration) and improve rebalance performance avoiding to rebalance the entire cluster?

Thank you in advance,
Mauro

Il giorno 27 set 2018, alle ore 13:14, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:


Yes, you can.
If not me others may also reply.

---
Ashish

From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "Ashish Pandey" <aspandey@xxxxxxxxxx>
Cc: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Thursday, September 27, 2018 4:24:12 PM
Subject: Re: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version


Dear Ashish,

I can not thank you enough!
Your procedure and description is very detailed.
I think to follow the first approach after setting network.ping-timeout option to 0 (If I’m not wrong “0" means “infinite”...I noticed that this value reduced rebalance errors).
After the fix I will set network.ping-timeout option to default value.

Could I contact you again if I need some kind of suggestion?

Thank you very much again.
Have a good day,
Mauro


Il giorno 27 set 2018, alle ore 12:38, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:


Hi Mauro,

We can divide the 36 newly added bricks into 6 set of 6 bricks each starting from brick37.
That means, there are 6 ec subvolumes and we have to deal with one sub volume at a time.
I have named it V1 to V6.

Problem:
Take the case of V1.
The best configuration/setup would be to have all the 6 bricks of V1 on 6 different nodes.
However, in your case you have added 3 new nodes. So, at least we should have 2 bricks on 3 different newly added nodes.
This way, in 4+2 EC configuration, even if one node goes down you will have 4 other bricks of that volume and the data on that volume would be accessible.
In current setup if s04-stg goes down, you will loose all the data on V1 and V2 as all the bricks will be down. We want to avoid and correct it.

Now, we can have two approach to correct/modify this setup.

Approach 1
We have to remove all the newly added bricks in a set of 6 bricks. This will trigger re- balance and move whole data to other sub volumes.
Repeat the above step and then once all the bricks are removed, add those bricks again in a set of 6 bricks, this time have 2 bricks from each of the 3 newly added Nodes.

While this is a valid and working approach, I personally think that this will take long time and also require lot of movement of data.

Approach 2

In this approach we can use the heal process. We have to deal with all the volumes (V1 to V6) one by one. Following are the steps for V1-

Step 1 -
Use replace-brick command to move following bricks on s05-stg node one by one (heal should be completed after every replace brick command)

Brick39: s04-stg:/gluster/mnt3/brick to s05-stg/<brick which is free>
Brick40: s04-stg:/gluster/mnt4/brick to s05-stg/<other brick which is free>

Command :
gluster v replace-brick <volname>  s04-stg:/gluster/mnt3/brick     s05-stg:/<brick which is free>    commit force
Try to give names to the bricks so that you can identify which 6 bricks belongs to same ec subvolume


Use replace-brick command to move following bricks on s06-stg node one by one

Brick41: s04-stg:/gluster/mnt5/brick to  s06-stg/<brick which is free>
Brick42: s04-stg:/gluster/mnt6/brick to  s06-stg/<other brick which is free>


Step 2 - After, every replace-brick command, you have to wait for heal to be completed.
check "gluster v heal <volname> info " if it shows any entry you have to wait for it to be completed.

After successful step 1 and step 2, setup for sub volume V1 will be fixed. The same steps you have to perform for other volumes. Only thing is that
the nodes would be different on which you have to move the bricks.




V1
 
Brick37: s04-stg:/gluster/mnt1/brick
Brick38: s04-stg:/gluster/mnt2/brick
Brick39: s04-stg:/gluster/mnt3/brick
Brick40: s04-stg:/gluster/mnt4/brick
Brick41: s04-stg:/gluster/mnt5/brick
Brick42: s04-stg:/gluster/mnt6/brick
 
V2
Brick43: s04-stg:/gluster/mnt7/brick
Brick44: s04-stg:/gluster/mnt8/brick
Brick45: s04-stg:/gluster/mnt9/brick
Brick46: s04-stg:/gluster/mnt10/brick
Brick47: s04-stg:/gluster/mnt11/brick
Brick48: s04-stg:/gluster/mnt12/brick
 
V3
Brick49: s05-stg:/gluster/mnt1/brick
Brick50: s05-stg:/gluster/mnt2/brick
Brick51: s05-stg:/gluster/mnt3/brick
Brick52: s05-stg:/gluster/mnt4/brick
Brick53: s05-stg:/gluster/mnt5/brick
Brick54: s05-stg:/gluster/mnt6/brick
 
V4
Brick55: s05-stg:/gluster/mnt7/brick
Brick56: s05-stg:/gluster/mnt8/brick
Brick57: s05-stg:/gluster/mnt9/brick
Brick58: s05-stg:/gluster/mnt10/brick
Brick59: s05-stg:/gluster/mnt11/brick
Brick60: s05-stg:/gluster/mnt12/brick
 
V5
Brick61: s06-stg:/gluster/mnt1/brick
Brick62: s06-stg:/gluster/mnt2/brick
Brick63: s06-stg:/gluster/mnt3/brick
Brick64: s06-stg:/gluster/mnt4/brick
Brick65: s06-stg:/gluster/mnt5/brick
Brick66: s06-stg:/gluster/mnt6/brick
 
V6
Brick67: s06-stg:/gluster/mnt7/brick
Brick68: s06-stg:/gluster/mnt8/brick
Brick69: s06-stg:/gluster/mnt9/brick
Brick70: s06-stg:/gluster/mnt10/brick
Brick71: s06-stg:/gluster/mnt11/brick
Brick72: s06-stg:/gluster/mnt12/brick
 

Just a note that these steps need movement of data.
Be careful while performing these steps and do one replace brick at a time and only after heal completion go to next.
Let me know if you have any issues.

---
Ashish



From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "Ashish Pandey" <aspandey@xxxxxxxxxx>
Cc: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Thursday, September 27, 2018 4:03:04 PM
Subject: Re: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version


Dear Ashish,

I hope I don’t disturb you so much, but I would like to ask you if you had some time to dedicate to our problem.
Please, forgive my insistence.

Thank you in advance,
Mauro

Il giorno 26 set 2018, alle ore 19:56, Mauro Tridici <mauro.tridici@xxxxxxx> ha scritto:

Hi Ashish,

sure, no problem! We are a little bit worried, but we can wait  :-)
Thank you very much for your support and your availability.

Regards,
Mauro


Il giorno 26 set 2018, alle ore 19:33, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:

Hi Mauro,

Yes, I can provide you step by step procedure to correct it.
Is it fine If i provide you the steps tomorrow as it is quite late over here and I don't want to miss anything in hurry?

---
Ashish

From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "Ashish Pandey" <aspandey@xxxxxxxxxx>
Cc: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Wednesday, September 26, 2018 6:54:19 PM
Subject: Re: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version


Hi Ashish,

in attachment you can find the rebalance log file and the last updated brick log file (the other files in /var/log/glusterfs/bricks directory seem to be too old).
I just stopped the running rebalance (as you can see at the bottom of the rebalance log file).
So, if exists a safe procedure to correct the problem I would like execute it.

I don’t know if I can ask you it, but, if it is possible, could you please describe me step by step the right procedure to remove the newly added bricks without losing the data that have been already rebalanced?

The following outputs show the result of “df -h” command executed on one of the first 3 nodes (s01, s02, s03) already existing  and on one of the last 3 nodes (s04, s05, s06) added recently.

[root@s06 bricks]# df -h
File system                          Dim. Usati Dispon. Uso% Montato su
/dev/mapper/cl_s06-root              100G  2,1G     98G   3% /
devtmpfs                              32G     0     32G   0% /dev
tmpfs                                 32G  4,0K     32G   1% /dev/shm
tmpfs                                 32G   26M     32G   1% /run
tmpfs                                 32G     0     32G   0% /sys/fs/cgroup
/dev/mapper/cl_s06-var               100G  2,0G     99G   2% /var
/dev/mapper/cl_s06-gluster           100G   33M    100G   1% /gluster
/dev/sda1                           1014M  152M    863M  15% /boot
/dev/mapper/gluster_vgd-gluster_lvd  9,0T  807G    8,3T   9% /gluster/mnt3
/dev/mapper/gluster_vgg-gluster_lvg  9,0T  807G    8,3T   9% /gluster/mnt6
/dev/mapper/gluster_vgc-gluster_lvc  9,0T  807G    8,3T   9% /gluster/mnt2
/dev/mapper/gluster_vge-gluster_lve  9,0T  807G    8,3T   9% /gluster/mnt4
/dev/mapper/gluster_vgj-gluster_lvj  9,0T  887G    8,2T  10% /gluster/mnt9
/dev/mapper/gluster_vgb-gluster_lvb  9,0T  807G    8,3T   9% /gluster/mnt1
/dev/mapper/gluster_vgh-gluster_lvh  9,0T  887G    8,2T  10% /gluster/mnt7
/dev/mapper/gluster_vgf-gluster_lvf  9,0T  807G    8,3T   9% /gluster/mnt5
/dev/mapper/gluster_vgi-gluster_lvi  9,0T  887G    8,2T  10% /gluster/mnt8
/dev/mapper/gluster_vgl-gluster_lvl  9,0T  887G    8,2T  10% /gluster/mnt11
/dev/mapper/gluster_vgk-gluster_lvk  9,0T  887G    8,2T  10% /gluster/mnt10
/dev/mapper/gluster_vgm-gluster_lvm  9,0T  887G    8,2T  10% /gluster/mnt12
tmpfs                                6,3G     0    6,3G   0% /run/user/0

[root@s01 ~]# df -h
File system                          Dim. Usati Dispon. Uso% Montato su
/dev/mapper/cl_s01-root              100G  5,3G     95G   6% /
devtmpfs                              32G     0     32G   0% /dev
tmpfs                                 32G   39M     32G   1% /dev/shm
tmpfs                                 32G   26M     32G   1% /run
tmpfs                                 32G     0     32G   0% /sys/fs/cgroup
/dev/mapper/cl_s01-var               100G   11G     90G  11% /var
/dev/md127                          1015M  151M    865M  15% /boot
/dev/mapper/cl_s01-gluster           100G   33M    100G   1% /gluster
/dev/mapper/gluster_vgi-gluster_lvi  9,0T  5,5T    3,6T  61% /gluster/mnt7
/dev/mapper/gluster_vgm-gluster_lvm  9,0T  5,4T    3,6T  61% /gluster/mnt11
/dev/mapper/gluster_vgf-gluster_lvf  9,0T  5,7T    3,4T  63% /gluster/mnt4
/dev/mapper/gluster_vgl-gluster_lvl  9,0T  5,8T    3,3T  64% /gluster/mnt10
/dev/mapper/gluster_vgj-gluster_lvj  9,0T  5,5T    3,6T  61% /gluster/mnt8
/dev/mapper/gluster_vgn-gluster_lvn  9,0T  5,4T    3,6T  61% /gluster/mnt12
/dev/mapper/gluster_vgk-gluster_lvk  9,0T  5,8T    3,3T  64% /gluster/mnt9
/dev/mapper/gluster_vgh-gluster_lvh  9,0T  5,6T    3,5T  63% /gluster/mnt6
/dev/mapper/gluster_vgg-gluster_lvg  9,0T  5,6T    3,5T  63% /gluster/mnt5
/dev/mapper/gluster_vge-gluster_lve  9,0T  5,7T    3,4T  63% /gluster/mnt3
/dev/mapper/gluster_vgc-gluster_lvc  9,0T  5,6T    3,5T  62% /gluster/mnt1
/dev/mapper/gluster_vgd-gluster_lvd  9,0T  5,6T    3,5T  62% /gluster/mnt2
tmpfs                                6,3G     0    6,3G   0% /run/user/0
s01-stg:tier2                        420T  159T    262T  38% /tier2

As you can see, used space value of each brick of the last servers is about 800GB.

Thank you,
Mauro








Il giorno 26 set 2018, alle ore 14:51, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:

Hi Mauro,

rebalance and brick logs should be the first thing we should go through.

There is a procedure to correct the configuration/setup but the situation you are in is difficult to follow that procedure.
You should have added the bricks hosted on s04-stg, s05-stg and s06-stg the same way you had the previous configuration.
That means 2 bricks on each node for one subvolume.
The procedure will require a lot of replace bricks which will again need healing and all. In addition to that we have to wait for re-balance to complete.

I would suggest that if whole data has not been rebalanced and if you can stop the rebalance and remove these newly added bricks properly then you should remove these newly added bricks.
After that, add these bricks so that you have 2 bricks of each volume on 3 newly added nodes.

Yes, it is like undoing whole effort but it is better to do it now then facing issues in future when it will be almost impossible to correct these things if you have lots of data.

---
Ashish



From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "Ashish Pandey" <aspandey@xxxxxxxxxx>
Cc: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Wednesday, September 26, 2018 5:55:02 PM
Subject: Re: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version


Dear Ashish,

thank you for you answer.
I could provide you the entire log file related to glusterd, glusterfsd and rebalance.
Please, could you indicate which one you need first?

Yes, we added the last 36 bricks after creating vol. Is there a procedure to correct this error? Is it still possible to do it?

Many thanks,
Mauro

Il giorno 26 set 2018, alle ore 14:13, Ashish Pandey <aspandey@xxxxxxxxxx> ha scritto:


I think we don't have enough logs to debug this so I would suggest you to provide more logs/info.
I have also observed that the configuration and setup of your volume is not very efficient.

For example:
Brick37: s04-stg:/gluster/mnt1/brick
Brick38: s04-stg:/gluster/mnt2/brick
Brick39: s04-stg:/gluster/mnt3/brick
Brick40: s04-stg:/gluster/mnt4/brick
Brick41: s04-stg:/gluster/mnt5/brick
Brick42: s04-stg:/gluster/mnt6/brick
Brick43: s04-stg:/gluster/mnt7/brick
Brick44: s04-stg:/gluster/mnt8/brick
Brick45: s04-stg:/gluster/mnt9/brick
Brick46: s04-stg:/gluster/mnt10/brick
Brick47: s04-stg:/gluster/mnt11/brick
Brick48: s04-stg:/gluster/mnt12/brick

These 12 bricks are on same node and the sub volume made up of these bricks will be of same subvolume, which is not good. Same is true for the bricks hosted on s05-stg and s06-stg
I think you have added these bricks after creating vol. The probability of disruption in connection of these bricks will be higher in this case.

---
Ashish

From: "Mauro Tridici" <mauro.tridici@xxxxxxx>
To: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Wednesday, September 26, 2018 3:38:35 PM
Subject: Rebalance failed on Distributed Disperse volume        based on 3.12.14 version

Dear All, Dear Nithya,

after upgrading from 3.10.5 version to 3.12.14, I tried to start a rebalance process to distribute data across the bricks, but something goes wrong.
Rebalance failed on different nodes and the time value needed to complete the procedure seems to be very high.

[root@s01 ~]# gluster volume rebalance tier2 status
                                    Node Rebalanced-files          size       scanned      failures       skipped               status  run time in h:m:s
                               ---------      -----------   -----------   -----------   -----------   -----------         ------------     --------------
                               localhost               19       161.6GB           537             2             2          in progress        0:32:23
                                 s02-stg               25       212.7GB           526             5             2          in progress        0:32:25
                                 s03-stg                4        69.1GB           511             0             0          in progress        0:32:25
                                 s04-stg                4      484Bytes         12283             0             3          in progress        0:32:25
                                 s05-stg               23      484Bytes         11049             0            10          in progress        0:32:25
                                 s06-stg                3         1.2GB          8032            11             3               failed        0:17:57
Estimated time left for rebalance to complete :     3601:05:41
volume rebalance: tier2: success

When rebalance processes fail, I can see the following kind of errors in /var/log/glusterfs/tier2-rebalance.log

Error type 1)

[2018-09-26 08:50:19.872575] W [MSGID: 122053] [ec-common.c:269:ec_check_status] 0-tier2-disperse-10: Operation failed on 2 of 6 subvolumes.(up=111111, mask=100111, remaining=
000000, good=100111, bad=011000)
[2018-09-26 08:50:19.901792] W [MSGID: 122053] [ec-common.c:269:ec_check_status] 0-tier2-disperse-11: Operation failed on 1 of 6 subvolumes.(up=111111, mask=111101, remaining=
000000, good=111101, bad=000010)

Error type 2)

[2018-09-26 08:53:31.566836] W [socket.c:600:__socket_rwv] 0-tier2-client-53: readv on 192.168.0.55:49153 failed (Connection reset by peer)

Error type 3)

[2018-09-26 08:57:37.852590] W [MSGID: 122035] [ec-common.c:571:ec_child_select] 0-tier2-disperse-9: Executing operation with some subvolumes unavailable (10)
[2018-09-26 08:57:39.282306] W [MSGID: 122035] [ec-common.c:571:ec_child_select] 0-tier2-disperse-9: Executing operation with some subvolumes unavailable (10)
[2018-09-26 09:02:04.928408] W [MSGID: 109023] [dht-rebalance.c:1013:__dht_check_free_space] 0-tier2-dht: data movement of file {blocks:0 name:(/OPA/archive/historical/dts/MRE
A/Observations/Observations/MREA14/Cs-1/CMCC/raw/CS013.ext)} would result in dst node (tier2-disperse-5:2440190848) having lower disk space than the source node (tier2-dispers
e-11:71373083776).Skipping file.

Error type 4)

W [rpc-clnt-ping.c:223:rpc_clnt_ping_cbk] 0-tier2-client-7: socket disconnected

Error type 5)

[2018-09-26 09:07:42.333720] W [glusterfsd.c:1375:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7e25) [0x7f0417e0ee25] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x55
90086004b5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x55900860032b] ) 0-: received signum (15), shutting down

Error type 6)

[2018-09-25 08:09:18.340658] C [rpc-clnt-ping.c:166:rpc_clnt_ping_timer_expired] 0-tier2-client-4: server 192.168.0.52:49153 has not responded in the last 42 seconds, disconnecting.

It seems that there are some network or timeout problems, but the network usage/traffic values are not so high.
Do you think that, in my volume configuration, I have to modify some volume options related to thread and/or network parameters?
Could you, please, help me to understand the cause of the problems above?

You can find below our volume info:
(volume is implemented on 6 servers; each server configuration:  2 cpu 10-cores, 64GB RAM, 1 SSD dedicated to the OS, 12 x 10TB HD)

[root@s04 ~]# gluster vol info
 
Volume Name: tier2
Type: Distributed-Disperse
Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c
Status: Started
Snapshot Count: 0
Number of Bricks: 12 x (4 + 2) = 72
Transport-type: tcp
Bricks:
Brick1: s01-stg:/gluster/mnt1/brick
Brick2: s02-stg:/gluster/mnt1/brick
Brick3: s03-stg:/gluster/mnt1/brick
Brick4: s01-stg:/gluster/mnt2/brick
Brick5: s02-stg:/gluster/mnt2/brick
Brick6: s03-stg:/gluster/mnt2/brick
Brick7: s01-stg:/gluster/mnt3/brick
Brick8: s02-stg:/gluster/mnt3/brick
Brick9: s03-stg:/gluster/mnt3/brick
Brick10: s01-stg:/gluster/mnt4/brick
Brick11: s02-stg:/gluster/mnt4/brick
Brick12: s03-stg:/gluster/mnt4/brick
Brick13: s01-stg:/gluster/mnt5/brick
Brick14: s02-stg:/gluster/mnt5/brick
Brick15: s03-stg:/gluster/mnt5/brick
Brick16: s01-stg:/gluster/mnt6/brick
Brick17: s02-stg:/gluster/mnt6/brick
Brick18: s03-stg:/gluster/mnt6/brick
Brick19: s01-stg:/gluster/mnt7/brick
Brick20: s02-stg:/gluster/mnt7/brick
Brick21: s03-stg:/gluster/mnt7/brick
Brick22: s01-stg:/gluster/mnt8/brick
Brick23: s02-stg:/gluster/mnt8/brick
Brick24: s03-stg:/gluster/mnt8/brick
Brick25: s01-stg:/gluster/mnt9/brick
Brick26: s02-stg:/gluster/mnt9/brick
Brick27: s03-stg:/gluster/mnt9/brick
Brick28: s01-stg:/gluster/mnt10/brick
Brick29: s02-stg:/gluster/mnt10/brick
Brick30: s03-stg:/gluster/mnt10/brick
Brick31: s01-stg:/gluster/mnt11/brick
Brick32: s02-stg:/gluster/mnt11/brick
Brick33: s03-stg:/gluster/mnt11/brick
Brick34: s01-stg:/gluster/mnt12/brick
Brick35: s02-stg:/gluster/mnt12/brick
Brick36: s03-stg:/gluster/mnt12/brick
Brick37: s04-stg:/gluster/mnt1/brick
Brick38: s04-stg:/gluster/mnt2/brick
Brick39: s04-stg:/gluster/mnt3/brick
Brick40: s04-stg:/gluster/mnt4/brick
Brick41: s04-stg:/gluster/mnt5/brick
Brick42: s04-stg:/gluster/mnt6/brick
Brick43: s04-stg:/gluster/mnt7/brick
Brick44: s04-stg:/gluster/mnt8/brick
Brick45: s04-stg:/gluster/mnt9/brick
Brick46: s04-stg:/gluster/mnt10/brick
Brick47: s04-stg:/gluster/mnt11/brick
Brick48: s04-stg:/gluster/mnt12/brick
Brick49: s05-stg:/gluster/mnt1/brick
Brick50: s05-stg:/gluster/mnt2/brick
Brick51: s05-stg:/gluster/mnt3/brick
Brick52: s05-stg:/gluster/mnt4/brick
Brick53: s05-stg:/gluster/mnt5/brick
Brick54: s05-stg:/gluster/mnt6/brick
Brick55: s05-stg:/gluster/mnt7/brick
Brick56: s05-stg:/gluster/mnt8/brick
Brick57: s05-stg:/gluster/mnt9/brick
Brick58: s05-stg:/gluster/mnt10/brick
Brick59: s05-stg:/gluster/mnt11/brick
Brick60: s05-stg:/gluster/mnt12/brick
Brick61: s06-stg:/gluster/mnt1/brick
Brick62: s06-stg:/gluster/mnt2/brick
Brick63: s06-stg:/gluster/mnt3/brick
Brick64: s06-stg:/gluster/mnt4/brick
Brick65: s06-stg:/gluster/mnt5/brick
Brick66: s06-stg:/gluster/mnt6/brick
Brick67: s06-stg:/gluster/mnt7/brick
Brick68: s06-stg:/gluster/mnt8/brick
Brick69: s06-stg:/gluster/mnt9/brick
Brick70: s06-stg:/gluster/mnt10/brick
Brick71: s06-stg:/gluster/mnt11/brick
Brick72: s06-stg:/gluster/mnt12/brick
Options Reconfigured:
network.ping-timeout: 60
diagnostics.count-fop-hits: on
diagnostics.latency-measurement: on
cluster.server-quorum-type: server
features.default-soft-limit: 90
features.quota-deem-statfs: on
performance.io-thread-count: 16
disperse.cpu-extensions: auto
performance.io-cache: off
network.inode-lru-limit: 50000
performance.md-cache-timeout: 600
performance.cache-invalidation: on
performance.stat-prefetch: on
features.cache-invalidation-timeout: 600
features.cache-invalidation: on
cluster.readdir-optimize: on
performance.parallel-readdir: off
performance.readdir-ahead: on
cluster.lookup-optimize: on
client.event-threads: 4
server.event-threads: 4
nfs.disable: on
transport.address-family: inet
cluster.quorum-type: auto
cluster.min-free-disk: 10
performance.client-io-threads: on
features.quota: on
features.inode-quota: on
features.bitrot: on
features.scrub: Active
cluster.brick-multiplex: on
cluster.server-quorum-ratio: 51%

If it can help, I paste here the output of “free -m” command executed on all the cluster nodes:

The result is almost the same on every nodes. In your opinion, the available RAM is enough to support data movement?

[root@s06 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:          64309       10409         464          15       53434       52998
Swap:         65535         103       65432

Thank you in advance.
Sorry for my long message, but I’m trying to notify you all available information.

Regards,
Mauro









_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users




_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841



-------------------------
Mauro Tridici

Fondazione CMCC
CMCC Supercomputing Center
presso Complesso Ecotekne - Università del Salento -
Strada Prov.le Lecce - Monteroni sn
73100 Lecce  IT

mobile: (+39) 327 5630841
 

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux