_______________________________________________Hello all,
We have a gluster replicate (with arbiter) volumes that we are getting “Transport endpoint is not connected” with on a rotating basis from each of the two file servers, and a third host that has the arbiter bricks on.
This is happening when trying to run a heal on all the volumes on the gluster hosts When I get the status of all the volumes all looks good.
This behavior seems to be a forshadowing of the gluster volumes becoming unresponsive to our vm cluster. As well as one of the file servers have two processes for each of the volumes instead of one per volume. Eventually the affected file server
will drop off the listed peers. Restarting glusterd/glusterfsd on the affected file server does not take care of the issue, we have to bring down both file
Servers due to the volumes not being seen by the vm cluster after the errors start occurring. I had seen that there were bug reports about the “Transport endpoint is not connected” on earlier versions of Gluster however had thought that
It had been addressed.
Dmesg did have some entries for “a possible syn flood on port *” which we changed the sysctl to “net.ipv4.tcp_max_syn_backlog = 2048” which seemed to help the syn flood messages but not the underlying volume issues.
I have put the versions of all the Gluster packages installed below as well as the “Heal” and “Status” commands showing the volumes are
This has just started happening but cannot definitively say if this started occurring after an update or not.
Thanks for any assistance.
Running Heal :
gluster volume heal ovirt_engine info
Brick ****1.rrc.local:/bricks/brick0/ovirt_engine
Status: Connected
Number of entries: 0
Brick ****3.rrc.local:/bricks/brick0/ovirt_engine
Status: Transport endpoint is not connected
Number of entries: -
Brick *****3.rrc.local:/bricks/arb-brick/ovirt_engine
Status: Transport endpoint is not connected
Number of entries: -
Running status :
gluster volume status ovirt_engine
Status of volume: ovirt_engine
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick*****.rrc.local:/bricks/brick0/ov
irt_engine 49152 0 Y 5521
Brick fs2-tier3.rrc.local:/bricks/brick0/ov
irt_engine 49152 0 Y 6245
Brick ****.rrc.local:/bricks/arb-b
rick/ovirt_engine 49152 0 Y 3526
Self-heal Daemon on localhost N/A N/A Y 5509
Self-heal Daemon on ***.rrc.local N/A N/A Y 6218
Self-heal Daemon on ***.rrc.local N/A N/A Y 3501
Self-heal Daemon on ****.rrc.local N/A N/A Y 3657
Self-heal Daemon on *****.rrc.local N/A N/A Y 3753
Self-heal Daemon on ****.rrc.local N/A N/A Y 17284
Task Status of Volume ovirt_engine
------------------------------------------------------------------------------
There are no active volume tasks
/etc/glusterd.vol. :
volume management
type mgmt/glusterd
option working-directory /var/lib/glusterd
option transport-type socket,rdma
option transport.socket.keepalive-time 10
option transport.socket.keepalive-interval 2
option transport.socket.read-fail-log off
option ping-timeout 0
option event-threads 1
option rpc-auth-allow-insecure on
# option transport.address-family inet6
# option base-port 49152
end-volume
rpm -qa |grep gluster
glusterfs-3.12.13-1.el7.x86_64
glusterfs-gnfs-3.12.13-1.el7.x86_64
glusterfs-api-3.12.13-1.el7.x86_64
glusterfs-cli-3.12.13-1.el7.x86_64
glusterfs-client-xlators-3.12.13-1.el7.x86_64
glusterfs-fuse-3.12.13-1.el7.x86_64
centos-release-gluster312-1.0-2.el7.centos.noarch
glusterfs-rdma-3.12.13-1.el7.x86_64
glusterfs-libs-3.12.13-1.el7.x86_64
glusterfs-server-3.12.13-1.el7.x86_64
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
