Re: Upgrade to 4.1.2 geo-replication does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



No, its again goes faulty after rebuild the session. And still getting the errors in the logs for lib

[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status

MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                        SLAVE NODE    STATUS    CRAWL STATUS    LAST_SYNCED
-----------------------------------------------------------------------------------------------------------------------------------------------------
gluster-poc-noida    glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
noi-poc-gluster      glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
[root@gluster-poc-noida ~]#

/krishna  

-----Original Message-----
From: Sunny Kumar <sunkumar@xxxxxxxxxx> 
Sent: Tuesday, August 28, 2018 3:56 PM
To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: gluster-users@xxxxxxxxxxx
Subject: Re:  Upgrade to 4.1.2 geo-replication does not work

EXTERNAL MAIL


On Tue, Aug 28, 2018 at 3:55 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
>
> Hi Sunny,
>
> [root@gluster-poc-noida ~]# ldconfig /usr/local/lib 
> [root@gluster-poc-noida ~]# ldconfig -p /usr/local/lib | grep libgf
>         libgfxdr.so.0 (libc6,x86-64) => /lib64/libgfxdr.so.0
>         libgfrpc.so.0 (libc6,x86-64) => /lib64/libgfrpc.so.0
>         libgfortran.so.3 (libc6,x86-64) => /lib64/libgfortran.so.3
>         libgfortran.so.1 (libc6,x86-64) => /lib64/libgfortran.so.1
>         libgfdb.so.0 (libc6,x86-64) => /lib64/libgfdb.so.0
>         libgfchangelog.so.0 (libc6,x86-64) => 
> /lib64/libgfchangelog.so.0
This is linked properly so check for geo-rep It should be working
>         libgfapi.so.0 (libc6,x86-64) => /lib64/libgfapi.so.0 
> [root@gluster-poc-noida ~]#
>
> -----Original Message-----
> From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> Sent: Tuesday, August 28, 2018 3:53 PM
> To: Krishna Verma <kverma@xxxxxxxxxxx>
> Cc: gluster-users@xxxxxxxxxxx
> Subject: Re:  Upgrade to 4.1.2 geo-replication does not 
> work
>
> EXTERNAL MAIL
>
>
> can you do ldconfig /usr/local/lib and share the output of ldconfig -p /usr/local/lib | grep libgf On Tue, Aug 28, 2018 at 3:45 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> >
> > Hi Sunny,
> >
> > I did the mentioned changes given in patch and restart the session for geo-replication. But again same errors in the logs.
> >
> > I have attaching the config files and logs here.
> >
> >
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep stop Stopping geo-replication session 
> > between glusterep & gluster-poc-sj::glusterep has been successful 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep delete Deleting geo-replication session 
> > between glusterep & gluster-poc-sj::glusterep has been successful 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep create push-pem force Creating 
> > geo-replication session between glusterep & 
> > gluster-poc-sj::glusterep has been successful 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep start geo-replication start failed for 
> > glusterep gluster-poc-sj::glusterep geo-replication command failed 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep start geo-replication start failed for 
> > glusterep gluster-poc-sj::glusterep geo-replication command failed 
> > [root@gluster-poc-noida ~]# vim 
> > /usr/libexec/glusterfs/python/syncdaemon/repce.py
> > [root@gluster-poc-noida ~]# systemctl restart glusterd 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep start Starting geo-replication session 
> > between glusterep & gluster-poc-sj::glusterep has been successful 
> > [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep 
> > gluster-poc-sj::glusterep status
> >
> > MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                        SLAVE NODE    STATUS    CRAWL STATUS    LAST_SYNCED
> > -----------------------------------------------------------------------------------------------------------------------------------------------------
> > gluster-poc-noida    glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
> > noi-poc-gluster      glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
> > [root@gluster-poc-noida ~]#
> >
> >
> > /Krishna.
> >
> > -----Original Message-----
> > From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> > Sent: Tuesday, August 28, 2018 3:17 PM
> > To: Krishna Verma <kverma@xxxxxxxxxxx>
> > Cc: gluster-users@xxxxxxxxxxx
> > Subject: Re:  Upgrade to 4.1.2 geo-replication does 
> > not work
> >
> > EXTERNAL MAIL
> >
> >
> > With same log message ?
> >
> > Can you please verify that
> > https://urldefense.proofpoint.com/v2/url?u=https-3A__review.gluster.org_-23_c_glusterfs_-2B_20207_&d=DwIBaQ&c=aUq983L2pue2FqKFoP6PGHMJQyoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE&m=F0ExtFUfa_YCktOGvy82x3IAxvi2GrbPR72jZ8beuYk&s=fGtkmezHJj5YoLN3dUeVUCcYFnREHyOSk36mRjbTTEQ&e= patch is present if not can you please apply that.
> > and try with symlinking ln -s /usr/lib64/libgfchangelog.so.0 /usr/lib64/libgfchangelog.so.
> >
> > Please share the log also.
> >
> > Regards,
> > Sunny
> > On Tue, Aug 28, 2018 at 3:02 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> > >
> > > Hi Sunny,
> > >
> > > Thanks for your response, I tried both, but still I am getting the same error.
> > >
> > >
> > > [root@noi-poc-gluster ~]# ldconfig /usr/lib [root@noi-poc-gluster 
> > > ~]#
> > >
> > > [root@noi-poc-gluster ~]# ln -s /usr/lib64/libgfchangelog.so.1 
> > > /usr/lib64/libgfchangelog.so [root@noi-poc-gluster ~]# ls -l 
> > > /usr/lib64/libgfchangelog.so lrwxrwxrwx. 1 root root 30 Aug 28 
> > > 14:59 /usr/lib64/libgfchangelog.so -> 
> > > /usr/lib64/libgfchangelog.so.1
> > >
> > > /Krishna
> > >
> > > -----Original Message-----
> > > From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> > > Sent: Tuesday, August 28, 2018 2:55 PM
> > > To: Krishna Verma <kverma@xxxxxxxxxxx>
> > > Cc: gluster-users@xxxxxxxxxxx
> > > Subject: Re:  Upgrade to 4.1.2 geo-replication does 
> > > not work
> > >
> > > EXTERNAL MAIL
> > >
> > >
> > > Hi Krish,
> > >
> > > You can run -
> > > #ldconfig /usr/lib
> > >
> > > If that still does not solves your problem you can do manual 
> > > symlink like - ln -s /usr/lib64/libgfchangelog.so.1 
> > > /usr/lib64/libgfchangelog.so
> > >
> > > Thanks,
> > > Sunny Kumar
> > > On Tue, Aug 28, 2018 at 1:47 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> > > >
> > > > Hi
> > > >
> > > >
> > > >
> > > > I am getting below error in gsyncd.log
> > > >
> > > >
> > > >
> > > > OSError: libgfchangelog.so: cannot open shared object file: No 
> > > > such file or directory
> > > >
> > > > [2018-08-28 07:19:41.446785] E [repce(worker /data/gluster/gv0):197:__call__] RepceClient: call failed       call=26469:139794524604224:1535440781.44        method=init     error=OSError
> > > >
> > > > [2018-08-28 07:19:41.447041] E [syncdutils(worker /data/gluster/gv0):330:log_raise_exception] <top>: FAIL:
> > > >
> > > > Traceback (most recent call last):
> > > >
> > > >   File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", 
> > > > line 311, in main
> > > >
> > > >     func(args)
> > > >
> > > >   File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", 
> > > > line 72, in subcmd_worker
> > > >
> > > >     local.service_loop(remote)
> > > >
> > > >   File "/usr/libexec/glusterfs/python/syncdaemon/resource.py",
> > > > line 1236, in service_loop
> > > >
> > > >     changelog_agent.init()
> > > >
> > > >   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 
> > > > 216, in __call__
> > > >
> > > >     return self.ins(self.meth, *a)
> > > >
> > > >   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 
> > > > 198, in __call__
> > > >
> > > >     raise res
> > > >
> > > > OSError: libgfchangelog.so: cannot open shared object file: No 
> > > > such file or directory
> > > >
> > > > [2018-08-28 07:19:41.457555] I [repce(agent /data/gluster/gv0):80:service_loop] RepceServer: terminating on reaching EOF.
> > > >
> > > > [2018-08-28 07:19:42.440184] I [monitor(monitor):272:monitor] Monitor:
> > > > worker died in startup phase  brick=/data/gluster/gv0
> > > >
> > > >
> > > >
> > > > Below is my file location:
> > > >
> > > >
> > > >
> > > > /usr/lib64/libgfchangelog.so.0
> > > >
> > > > /usr/lib64/libgfchangelog.so.0.0.1
> > > >
> > > >
> > > >
> > > > What I can do to fix it ?
> > > >
> > > >
> > > >
> > > > /Krish
> > > >
> > > > _______________________________________________
> > > > Gluster-users mailing list
> > > > Gluster-users@xxxxxxxxxxx
> > > > https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.glust
> > > > er
> > > > .o
> > > > rg
> > > > _mailman_listinfo_gluster-2Dusers&d=DwIBaQ&c=aUq983L2pue2FqKFoP6
> > > > PG
> > > > HM
> > > > JQ
> > > > yoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE
> > > > &m
> > > > =_
> > > > u6
> > > > vGRjlVsype7Z8hXDgCONilqVe4sIWkXNqqz2n3IQ&s=i0EUwtUHurhJHyw9UPpep
> > > > Cd
> > > > LB
> > > > 70
> > > > 1mkxoNZWYvU7XXug&e=
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux