I think I have replied all the questions you have asked.
Let me know if you need any additional information.
---
Ashish
From: "Benjamin Kingston" <ben@xxxxxxxxxxxxxxx>
To: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Tuesday, July 31, 2018 1:01:29 AM
Subject: Increase redundancy on existing disperse volume
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
To: "gluster-users" <gluster-users@xxxxxxxxxxx>
Sent: Tuesday, July 31, 2018 1:01:29 AM
Subject: Increase redundancy on existing disperse volume
I'm working to convert my 3x3 arbiter replicated volume into a disperse volume, however I have to work with the existing disks, maybe adding another 1 or 2 new disks if necessary. I'm hoping to destroy the bricks on one of the replicated nodes and build it into a
-ben
I'm opting to host this volume on a set of controllers connected to a common backplane, I don't need help on this config, just on the constraints of the disperse volumes.
I have some questions about the disperse functionality
1. If I create a 1 redundancy volume in the beginning, after I add more bricks, can I increase redundancy to 2 or 3
2. If I create the original volume with 6TB bricks, am I really stuck with 6TB bricks even if I add 2 or more 10TB bricks
3. Is it required to extend a volume by the same number or bricks it was created with? If the original volume is made with 3 bricks, do I have to always add capacity in 3 brick increments?
-ben
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users