Re: Upgrade to 4.1.1 geo-replication does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marcus,

Is the gluster geo-rep version is same on both master and slave?

Thanks,
Kotresh HR

On Fri, Jul 13, 2018 at 1:26 AM, Marcus Pedersén <marcus.pedersen@xxxxxx> wrote:

Hi Kotresh,

i have replaced both files (gsyncdconfig.py and repce.py) in all nodes both master and slave.

I rebooted all servers but geo-replication status is still Stopped.

I tried to start geo-replication with response Successful but status still show Stopped on all nodes.

Nothing has been written to geo-replication logs since I sent the tail of the log.

So I do not know what info to provide?


Please, help me to find a way to solve this.


Thanks!


Regards

Marcus



Från: gluster-users-bounces@gluster.org <gluster-users-bounces@gluster.org> för Marcus Pedersén <marcus.pedersen@xxxxxx>
Skickat: den 12 juli 2018 08:51
Till: Kotresh Hiremath Ravishankar
Kopia: gluster-users@xxxxxxxxxxx
Ämne: Re: Upgrade to 4.1.1 geo-replication does not work
 
Thanks Kotresh,
I installed through the official centos channel, centos-release-gluster41.
Isn't this fix included in centos install?
I will have a look, test it tonight and come back to you!

Thanks a lot!

Regards
Marcus

################
Marcus Pedersén
Systemadministrator
Interbull Centre
################
Sent from my phone
################

Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>:
Hi Marcus,

I think the fix [1] is needed in 4.1
Could you please this out and let us know if that works for you?

Thanks,
Kotresh HR

On Thu, Jul 12, 2018 at 1:49 AM, Marcus Pedersén <marcus.pedersen@xxxxxx> wrote:

Hi all,

I have upgraded from 3.12.9 to 4.1.1 and been following upgrade instructions for offline upgrade.

I upgraded geo-replication side first 1 x (2+1) and the master side after that 2 x (2+1).

Both clusters works the way they should on their own.

After upgrade on master side status for all geo-replication nodes is Stopped.

I tried to start the geo-replication from master node and response back was started successfully.

Status again .... Stopped

Tried to start again and get response started successfully, after that all glusterd crashed on all master nodes.

After a restart of all glusterd the master cluster was up again.

Status for geo-replication is still Stopped and every try to start it after this gives the response successful but still status Stopped.


Please help me get the geo-replication up and running again.


Best regards

Marcus Pedersén


Part of geo-replication log from master node:

[2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__] ChangelogAgent: Agent listining...
[2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote] SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:49.363514] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection to peer is broken
[2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] Popen: command returned error    cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 gluster://localhost:urd-gds-volume   error=2
[2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>
[2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>                  {monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>                  ...
[2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', 'config-set', 'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
[2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop] RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
[2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection       brick=/urd-gds/gluster
[2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: starting gsyncd worker   brick=/urd-gds/gluster  slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote] SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__] ChangelogAgent: Agent listining...
[2018-07-11 18:42:59.945693] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection to peer is broken
[2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] Popen: command returned error    cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5534547f3675a710a107722317484f.sock geouser@urd-gds-geo-000 /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 gluster://localhost:urd-gds-volume   error=2
[2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>
[2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>                  {monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>                  ...
[2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', 'config-set', 'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
[2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop] RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
[2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection       brick=/urd-gds/gluster
[2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: starting gsyncd worker    brick=/urd-gds/gluster  slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: Changelog Agent died, Aborting Worker     brick=/urd-gds/gluster
[2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection        brick=/urd-gds/gluster
[2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status] GeorepStatus: Worker Status Change status=inconsistent
[2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception] <top>: FAIL:
Traceback (most recent call last):
  File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line 361, in twrap
    except:
  File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428, in wmon
    sys.exit()
TypeError: 'int' object is not iterable
[2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>: exiting.

---
När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users



--
Thanks and Regards,
Kotresh H R

---
När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here

---
När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here




--
Thanks and Regards,
Kotresh H R
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux