Re: Slow write times to gluster disk

[Pat Haley <phaley@xxxxxxx>]

Hi Raghavendra,

Setting the performance.write-behind off had a small improvement on the write speed (~3%),

We were unable to turn on "group metadata-cache".  When we try get errors like

# gluster volume set data-volume group metadata-cache
'/var/lib/glusterd/groups/metadata-cache' file format not valid.

Was metadata-cache available for gluster 3.7.11? We ask because the release notes for 3.11 mentions “Feature for metadata-caching/small file performance is production ready.” (https://gluster.readthedocs.io/en/latest/release-notes/3.11.0/).

Do any of these results suggest anything?  If not, what further tests would be useful?

Thanks

Pat

 

On 06/22/2018 07:51 AM, Raghavendra Gowdappa wrote:

On Thu, Jun 21, 2018 at 8:41 PM, Pat Haley <phaley@xxxxxxx> wrote:

Hi Raghavendra,

Thanks for the suggestions.  Our technician will be in on Monday.  We'll test then and let you know the results.

One question I have, is the "group metadata-cache" option supposed to directly impact the performance or is it to help collect data?  If the latter, where will the data be located?

It impacts performance.

Thanks again.

Pat

On 06/21/2018 01:01 AM, Raghavendra Gowdappa wrote:

On Thu, Jun 21, 2018 at 10:24 AM, Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx> wrote:

For the case of writes to glusterfs mount,

I saw in earlier conversations that there are too many lookups, but small number of writes. Since writes cached in write-behind would invalidate metadata cache, lookups won't be absorbed by md-cache. I am wondering what would results look like if we turn off performance.write-behind.

@Pat,

Can you set,

# gluster volume set <volname> performance.write-behind off

Please turn on "group metadata-cache" for write tests too.

and redo the tests writing to glusterfs mount? Let us know about the results you see.

regards,

Raghavendra

On Thu, Jun 21, 2018 at 8:33 AM, Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx> wrote:

On Thu, Jun 21, 2018 at 8:32 AM, Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx> wrote:

For the case of reading from Glusterfs mount, read-ahead should help. However, we've known issues with read-ahead[1][2]. To work around these, can you try with,

1. Turn off performance.open-behind

#gluster volume set <volname> performance.open-behind off

2. enable group meta metadata-cache
# gluster volume set <volname> group metadata-cache

[1]  https://bugzilla.redhat.com/show_bug.cgi?id=1084508

[2] https://bugzilla.redhat.com/show_bug.cgi?id=1214489

On Thu, Jun 21, 2018 at 5:00 AM, Pat Haley <phaley@xxxxxxx> wrote:

Hi,

We were recently revisiting our problems with the slowness of gluster writes (http://lists.gluster.org/pipermail/gluster-users/2017-April/030529.html). Specifically we were testing the suggestions in a recent post (http://lists.gluster.org/pipermail/gluster-users/2018-March/033699.html). The first two suggestions (specifying a negative-timeout in the mount settings or adding rpc-auth-allow-insecure to glusterd.vol) did not improve our performance, while setting "disperse.eager-lock off" provided a tiny (5%) speed-up.

Some of the various tests we have tried earlier can be seen in the links below.  Do any of the above observations suggest what we could try next to either improve the speed or debug the issue?  Thanks

http://lists.gluster.org/pipermail/gluster-users/2017-June/031565.html
http://lists.gluster.org/pipermail/gluster-users/2017-May/030937.html

Pat

--

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley                          Email:  phaley@xxxxxxx
Center for Ocean Engineering       Phone:  (617) 253-6824
Dept. of Mechanical Engineering    Fax:    (617) 253-8125
MIT, Room 5-213                    http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA  02139-4301

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

-- 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley                          Email:  phaley@xxxxxxx
Center for Ocean Engineering       Phone:  (617) 253-6824
Dept. of Mechanical Engineering    Fax:    (617) 253-8125
MIT, Room 5-213                    http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA  02139-4301

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

-- 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley                          Email:  phaley@xxxxxxx
Center for Ocean Engineering       Phone:  (617) 253-6824
Dept. of Mechanical Engineering    Fax:    (617) 253-8125
MIT, Room 5-213                    http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA  02139-4301

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users