I've been back at it, and still am unable to get more than one of my physical nodes to come online in ovirt, nor am I able to get more than the two gluster volumes (storage domains) to show online within ovirt.
In Storage -> Volumes, they all show offline (many with one brick down, which is correct: I have one server off)
However, in Storage -> domains, they all show down (although somehow, I got machines from the data domain to start), and there's no obvious way I've seen to tell them to bring it online. It claims none of the servers can see that volume, but I've quadruple-checked that the volumes are mounted on the engines and are fully functional there. I have some more VMs I need to get back up and running. How do I fix this?
ovirt1, for unknown reasons, will not work. Attempts to bring it online fail, and I haven't figured out what log file to look in yet for more details.
On Wed, May 30, 2018 at 9:36 AM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:
Hi all again:I'm now subscribed to gluster-users as well, so I should get any replies from that side too.At this point, I am seeing acceptable (although slower than I expect) performance much of the time, with periodic massive spikes in latency (occasionally so bad as to cause ovirt to detect a engine bad health status). Often, if I check the logs just then, I'll see those call traces in xfs_log_worker or other gluster processes, as well as hung task timeout messages.As to the profile suggesting ovirt1 had poorer performance than ovirt2, I don't have an explanation. gluster volume info engine on both hosts are identical. The computers and drives are identical (Dell R610 with PERC 6/i controller configured to pass through the drive). ovirt1 and ovirt2's partiion scheme/map do vary somewhat, but I figured that wouldn't be a big deal and gluster just uses the least common denominator. Is that accurate?In case it was missed, here are the dmesg errors being thrown by gluster (as far as I can tell). They definately started after I upgraded from gluster 3.8 to 3.12:[ 6604.536156] perf: interrupt took too long (9593 > 9565), lowering kernel.perf_event_max_sample_rate to 20000 [ 8280.188734] INFO: task xfsaild/dm-10:1061 blocked for more than 120 seconds.[ 8280.188787] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8280.188837] xfsaild/dm-10 D ffff93203a2eeeb0 0 1061 2 0x00000000[ 8280.188843] Call Trace:[ 8280.188857] [<ffffffff960a3a2e>] ? try_to_del_timer_sync+0x5e/0x90 [ 8280.188864] [<ffffffff96713f79>] schedule+0x29/0x70[ 8280.188932] [<ffffffffc049fe36>] _xfs_log_force+0x1c6/0x2c0 [xfs][ 8280.188939] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8280.188972] [<ffffffffc04abfec>] ? xfsaild+0x16c/0x6f0 [xfs][ 8280.189003] [<ffffffffc049ff5c>] xfs_log_force+0x2c/0x70 [xfs][ 8280.189035] [<ffffffffc04abe80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [ 8280.189067] [<ffffffffc04abfec>] xfsaild+0x16c/0x6f0 [xfs][ 8280.189100] [<ffffffffc04abe80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [ 8280.189105] [<ffffffff960bb161>] kthread+0xd1/0xe0[ 8280.189109] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[ 8280.189117] [<ffffffff96720677>] ret_from_fork_nospec_begin+0x21/0x21 [ 8280.189121] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[ 8280.189161] INFO: task glusterclogfsyn:6421 blocked for more than 120 seconds.[ 8280.189207] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8280.189256] glusterclogfsyn D ffff93203a2edee0 0 6421 1 0x00000080[ 8280.189260] Call Trace:[ 8280.189265] [<ffffffff96713f79>] schedule+0x29/0x70[ 8280.189300] [<ffffffffc04a0388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][ 8280.189305] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8280.189333] [<ffffffffc0480b97>] xfs_file_fsync+0x107/0x1e0 [xfs][ 8280.189340] [<ffffffff9624f0e7>] do_fsync+0x67/0xb0[ 8280.189345] [<ffffffff9672076f>] ? system_call_after_swapgs+0xbc/0x160 [ 8280.189348] [<ffffffff9624f3d0>] SyS_fsync+0x10/0x20[ 8280.189352] [<ffffffff9672082f>] system_call_fastpath+0x1c/0x21[ 8280.189356] [<ffffffff9672077b>] ? system_call_after_swapgs+0xc8/0x160 [ 8280.189360] INFO: task glusteriotwr2:766 blocked for more than 120 seconds.[ 8280.189404] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8280.189453] glusteriotwr2 D ffff931cfa510000 0 766 1 0x00000080[ 8280.189457] Call Trace:[ 8280.189476] [<ffffffffc01a3839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [ 8280.189480] [<ffffffff96713f79>] schedule+0x29/0x70[ 8280.189484] [<ffffffff967118e9>] schedule_timeout+0x239/0x2c0[ 8280.189494] [<ffffffffc01a3d98>] ? dm_make_request+0x128/0x1a0 [dm_mod][ 8280.189498] [<ffffffff9671348d>] io_schedule_timeout+0xad/0x130[ 8280.189502] [<ffffffff967145ad>] wait_for_completion_io+0xfd/0x140 [ 8280.189507] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8280.189513] [<ffffffff9631e574>] blkdev_issue_flush+0xb4/0x110[ 8280.189546] [<ffffffffc04984b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [ 8280.189588] [<ffffffffc0480c40>] xfs_file_fsync+0x1b0/0x1e0 [xfs][ 8280.189593] [<ffffffff9624f0e7>] do_fsync+0x67/0xb0[ 8280.189597] [<ffffffff9672076f>] ? system_call_after_swapgs+0xbc/0x160 [ 8280.189600] [<ffffffff9624f3d0>] SyS_fsync+0x10/0x20[ 8280.189604] [<ffffffff9672082f>] system_call_fastpath+0x1c/0x21[ 8280.189608] [<ffffffff9672077b>] ? system_call_after_swapgs+0xc8/0x160 [ 8400.186024] INFO: task xfsaild/dm-10:1061 blocked for more than 120 seconds.[ 8400.186077] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8400.186127] xfsaild/dm-10 D ffff93203a2eeeb0 0 1061 2 0x00000000[ 8400.186133] Call Trace:[ 8400.186146] [<ffffffff960a3a2e>] ? try_to_del_timer_sync+0x5e/0x90 [ 8400.186153] [<ffffffff96713f79>] schedule+0x29/0x70[ 8400.186221] [<ffffffffc049fe36>] _xfs_log_force+0x1c6/0x2c0 [xfs][ 8400.186227] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8400.186260] [<ffffffffc04abfec>] ? xfsaild+0x16c/0x6f0 [xfs][ 8400.186292] [<ffffffffc049ff5c>] xfs_log_force+0x2c/0x70 [xfs][ 8400.186324] [<ffffffffc04abe80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [ 8400.186356] [<ffffffffc04abfec>] xfsaild+0x16c/0x6f0 [xfs][ 8400.186388] [<ffffffffc04abe80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [ 8400.186394] [<ffffffff960bb161>] kthread+0xd1/0xe0[ 8400.186398] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[ 8400.186405] [<ffffffff96720677>] ret_from_fork_nospec_begin+0x21/0x21 [ 8400.186409] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[ 8400.186450] INFO: task glusterclogfsyn:6421 blocked for more than 120 seconds.[ 8400.186496] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8400.186545] glusterclogfsyn D ffff93203a2edee0 0 6421 1 0x00000080[ 8400.186549] Call Trace:[ 8400.186554] [<ffffffff96713f79>] schedule+0x29/0x70[ 8400.186589] [<ffffffffc04a0388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][ 8400.186593] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8400.186622] [<ffffffffc0480b97>] xfs_file_fsync+0x107/0x1e0 [xfs][ 8400.186629] [<ffffffff9624f0e7>] do_fsync+0x67/0xb0[ 8400.186634] [<ffffffff9672076f>] ? system_call_after_swapgs+0xbc/0x160 [ 8400.186637] [<ffffffff9624f3d0>] SyS_fsync+0x10/0x20[ 8400.186641] [<ffffffff9672082f>] system_call_fastpath+0x1c/0x21[ 8400.186645] [<ffffffff9672077b>] ? system_call_after_swapgs+0xc8/0x160 [ 8400.186649] INFO: task glusteriotwr2:766 blocked for more than 120 seconds.[ 8400.186693] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8400.186741] glusteriotwr2 D ffff931cfa510000 0 766 1 0x00000080[ 8400.186746] Call Trace:[ 8400.186764] [<ffffffffc01a3839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [ 8400.186768] [<ffffffff96713f79>] schedule+0x29/0x70[ 8400.186772] [<ffffffff967118e9>] schedule_timeout+0x239/0x2c0[ 8400.186782] [<ffffffffc01a3d98>] ? dm_make_request+0x128/0x1a0 [dm_mod][ 8400.186786] [<ffffffff9671348d>] io_schedule_timeout+0xad/0x130[ 8400.186790] [<ffffffff967145ad>] wait_for_completion_io+0xfd/0x140 [ 8400.186795] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8400.186800] [<ffffffff9631e574>] blkdev_issue_flush+0xb4/0x110[ 8400.186833] [<ffffffffc04984b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [ 8400.186862] [<ffffffffc0480c40>] xfs_file_fsync+0x1b0/0x1e0 [xfs][ 8400.186879] [<ffffffff9624f0e7>] do_fsync+0x67/0xb0[ 8400.186884] [<ffffffff9672076f>] ? system_call_after_swapgs+0xbc/0x160 [ 8400.186887] [<ffffffff9624f3d0>] SyS_fsync+0x10/0x20[ 8400.186891] [<ffffffff9672082f>] system_call_fastpath+0x1c/0x21[ 8400.186895] [<ffffffff9672077b>] ? system_call_after_swapgs+0xc8/0x160 [ 8400.186912] INFO: task kworker/3:4:3191 blocked for more than 120 seconds.[ 8400.186957] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 8400.187006] kworker/3:4 D ffff931faf598fd0 0 3191 2 0x00000080[ 8400.187041] Workqueue: xfs-sync/dm-10 xfs_log_worker [xfs][ 8400.187043] Call Trace:[ 8400.187050] [<ffffffff9614e45f>] ? delayacct_end+0x8f/0xb0[ 8400.187055] [<ffffffff960dbbc8>] ? update_group_power+0x28/0x280[ 8400.187059] [<ffffffff96713f79>] schedule+0x29/0x70[ 8400.187062] [<ffffffff967118e9>] schedule_timeout+0x239/0x2c0[ 8400.187066] [<ffffffff9671432d>] wait_for_completion+0xfd/0x140[ 8400.187071] [<ffffffff960cf1b0>] ? wake_up_state+0x20/0x20[ 8400.187075] [<ffffffff960b418d>] flush_work+0xfd/0x190[ 8400.187079] [<ffffffff960b06e0>] ? move_linked_works+0x90/0x90[ 8400.187110] [<ffffffffc04a1d8a>] xlog_cil_force_lsn+0x8a/0x210 [xfs][ 8400.187142] [<ffffffffc049fcf5>] _xfs_log_force+0x85/0x2c0 [xfs][ 8400.187174] [<ffffffffc049ffd6>] ? xfs_log_worker+0x36/0x100 [xfs][ 8400.187206] [<ffffffffc049ff5c>] xfs_log_force+0x2c/0x70 [xfs][ 8400.187237] [<ffffffffc049ffd6>] xfs_log_worker+0x36/0x100 [xfs][ 8400.187241] [<ffffffff960b312f>] process_one_work+0x17f/0x440[ 8400.187245] [<ffffffff960b3df6>] worker_thread+0x126/0x3c0[ 8400.187249] [<ffffffff960b3cd0>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 8400.187253] [<ffffffff960bb161>] kthread+0xd1/0xe0[ 8400.187257] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[ 8400.187261] [<ffffffff96720677>] ret_from_fork_nospec_begin+0x21/0x21 [ 8400.187265] [<ffffffff960bb090>] ? insert_kthread_work+0x40/0x40[13493.643624] perf: interrupt took too long (12026 > 11991), lowering kernel.perf_event_max_sample_rate to 16000 On Wed, May 30, 2018 at 2:44 AM, Krutika Dhananjay <kdhananj@xxxxxxxxxx> wrote:The profile seems to suggest very high latencies on the brick at ovirt1.nwfiber.com:/gluster/brick1/engine ovirt2.* shows decent numbers. Is everything OK with the brick on ovirt1?Are the bricks of engine volume on both these servers identical in terms of their config?-KrutikaOn Wed, May 30, 2018 at 3:07 PM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:Hi:Thank you. I was finally able to get my cluster minimally functional again (its 2am local here; had to be up by 6am). I set the cluster.eager-lock off, but I'm still seeing performance issues. Here's the engine volume:Brick: ovirt1.nwfiber.com:/gluster/brick1/engine ------------------------------------------------ Cumulative Stats:Block Size: 256b+ 512b+ 4096b+No. of Reads: 702 24 772No. of Writes: 0 939 4802Block Size: 8192b+ 16384b+ 32768b+No. of Reads: 0 51 49No. of Writes: 4211 858 291Block Size: 65536b+ 131072b+No. of Reads: 49 5232No. of Writes: 333 588%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 3 FORGET0.00 0.00 us 0.00 us 0.00 us 1227 RELEASE0.00 0.00 us 0.00 us 0.00 us 1035 RELEASEDIR0.00 827.00 us 619.00 us 1199.00 us 10 READDIRP0.00 98.38 us 30.00 us 535.00 us 144 ENTRYLK0.00 180.11 us 121.00 us 257.00 us 94 REMOVEXATTR0.00 208.03 us 23.00 us 1980.00 us 182 GETXATTR0.00 1212.71 us 35.00 us 29459.00 us 38 READDIR0.01 260.39 us 172.00 us 552.00 us 376 XATTROP0.01 305.10 us 45.00 us 144983.00 us 727 STATFS0.03 1267.23 us 22.00 us 418399.00 us 451 FLUSH0.04 1164.14 us 86.00 us 437638.00 us 600 OPEN0.07 2253.75 us 3.00 us 645037.00 us 598 OPENDIR0.08 17360.97 us 149.00 us 962156.00 us 94 SETATTR0.12 2733.36 us 50.00 us 1683945.00 us 877 FSTAT0.21 3041.55 us 29.00 us 1021732.00 us 1368 INODELK0.24 389.93 us 107.00 us 550203.00 us 11840 FXATTROP0.34 14820.49 us 38.00 us 1935527.00 us 444 STAT0.88 3765.77 us 42.00 us 1341978.00 us 4581 LOOKUP15.06 19624.04 us 26.00 us 6412511.00 us 14971 FINODELK21.63 59817.26 us 45.00 us 4008832.00 us 7054 FSYNC23.19 263941.14 us 86.00 us 4130892.00 us 1714 READ38.10 125578.64 us 207.00 us 7682338.00 us 5919 WRITEDuration: 6957 secondsData Read: 694832857 bytesData Written: 192751104 bytesInterval 0 Stats:Block Size: 256b+ 512b+ 4096b+No. of Reads: 702 24 772No. of Writes: 0 939 4802Block Size: 8192b+ 16384b+ 32768b+No. of Reads: 0 51 49No. of Writes: 4211 858 291Block Size: 65536b+ 131072b+No. of Reads: 49 5232No. of Writes: 333 588%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 3 FORGET0.00 0.00 us 0.00 us 0.00 us 1227 RELEASE0.00 0.00 us 0.00 us 0.00 us 1035 RELEASEDIR0.00 827.00 us 619.00 us 1199.00 us 10 READDIRP0.00 98.38 us 30.00 us 535.00 us 144 ENTRYLK0.00 180.11 us 121.00 us 257.00 us 94 REMOVEXATTR0.00 208.03 us 23.00 us 1980.00 us 182 GETXATTR0.00 1212.71 us 35.00 us 29459.00 us 38 READDIR0.01 260.39 us 172.00 us 552.00 us 376 XATTROP0.01 305.10 us 45.00 us 144983.00 us 727 STATFS0.03 1267.23 us 22.00 us 418399.00 us 451 FLUSH0.04 1164.14 us 86.00 us 437638.00 us 600 OPEN0.07 2253.75 us 3.00 us 645037.00 us 598 OPENDIR0.08 17360.97 us 149.00 us 962156.00 us 94 SETATTR0.12 2733.36 us 50.00 us 1683945.00 us 877 FSTAT0.21 3041.55 us 29.00 us 1021732.00 us 1368 INODELK0.24 389.93 us 107.00 us 550203.00 us 11840 FXATTROP0.34 14820.49 us 38.00 us 1935527.00 us 444 STAT0.91 3859.75 us 42.00 us 1341978.00 us 4581 LOOKUP15.05 19622.80 us 26.00 us 6412511.00 us 14971 FINODELK21.62 59809.04 us 45.00 us 4008832.00 us 7054 FSYNC23.18 263941.14 us 86.00 us 4130892.00 us 1714 READ38.09 125562.74 us 207.00 us 7682338.00 us 5919 WRITEDuration: 6957 secondsData Read: 694832857 bytesData Written: 192751104 bytesBrick: ovirt2.nwfiber.com:/gluster/brick1/engine ------------------------------------------------ Cumulative Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 704 167 216No. of Writes: 0 939 0Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 424 34918 9866No. of Writes: 0 4802 4211Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 12695 3290 3880No. of Writes: 858 291 333Block Size: 131072b+No. of Reads: 13718No. of Writes: 596%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 3 FORGET0.00 0.00 us 0.00 us 0.00 us 1228 RELEASE0.00 0.00 us 0.00 us 0.00 us 1041 RELEASEDIR0.06 74.26 us 21.00 us 915.00 us 144 ENTRYLK0.07 141.97 us 87.00 us 268.00 us 94 REMOVEXATTR0.08 370.68 us 22.00 us 1311.00 us 38 READDIR0.09 184.88 us 108.00 us 316.00 us 94 SETATTR0.14 56.41 us 21.00 us 540.00 us 451 FLUSH0.14 139.42 us 18.00 us 3251.00 us 184 GETXATTR0.31 96.06 us 2.00 us 2293.00 us 598 OPENDIR0.35 88.76 us 31.00 us 716.00 us 727 STATFS0.43 131.96 us 59.00 us 784.00 us 600 OPEN0.44 214.77 us 110.00 us 851.00 us 376 XATTROP0.44 81.02 us 21.00 us 3029.00 us 998 STAT0.51 68.57 us 17.00 us 3039.00 us 1368 INODELK1.26 429.06 us 274.00 us 988.00 us 539 READDIRP1.89 109.48 us 38.00 us 2492.00 us 3175 FSTAT5.09 62.48 us 19.00 us 4578.00 us 14967 FINODELK5.72 229.43 us 32.00 us 979.00 us 4581 LOOKUP11.48 356.40 us 144.00 us 16222.00 us 5917 WRITE12.40 192.55 us 87.00 us 4372.00 us 11834 FXATTROP12.48 325.11 us 33.00 us 10702.00 us 7051 FSYNC46.61 2063.11 us 131.00 us 193833.00 us 4151 READDuration: 6958 secondsData Read: 2782908225 bytesData Written: 193799680 bytesInterval 0 Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 704 167 216No. of Writes: 0 939 0Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 424 34918 9866No. of Writes: 0 4802 4211Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 12695 3290 3880No. of Writes: 858 291 333Block Size: 131072b+No. of Reads: 13718No. of Writes: 596%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 3 FORGET0.00 0.00 us 0.00 us 0.00 us 1228 RELEASE0.00 0.00 us 0.00 us 0.00 us 1041 RELEASEDIR0.06 74.26 us 21.00 us 915.00 us 144 ENTRYLK0.07 141.97 us 87.00 us 268.00 us 94 REMOVEXATTR0.08 370.68 us 22.00 us 1311.00 us 38 READDIR0.09 184.88 us 108.00 us 316.00 us 94 SETATTR0.14 56.41 us 21.00 us 540.00 us 451 FLUSH0.14 139.42 us 18.00 us 3251.00 us 184 GETXATTR0.31 96.06 us 2.00 us 2293.00 us 598 OPENDIR0.35 88.76 us 31.00 us 716.00 us 727 STATFS0.43 131.96 us 59.00 us 784.00 us 600 OPEN0.44 214.77 us 110.00 us 851.00 us 376 XATTROP0.44 81.02 us 21.00 us 3029.00 us 998 STAT0.51 68.57 us 17.00 us 3039.00 us 1368 INODELK1.26 429.06 us 274.00 us 988.00 us 539 READDIRP1.89 109.51 us 38.00 us 2492.00 us 3175 FSTAT5.09 62.48 us 19.00 us 4578.00 us 14967 FINODELK5.72 229.43 us 32.00 us 979.00 us 4581 LOOKUP11.48 356.40 us 144.00 us 16222.00 us 5917 WRITE12.40 192.55 us 87.00 us 4372.00 us 11834 FXATTROP12.48 325.11 us 33.00 us 10702.00 us 7051 FSYNC46.62 2063.91 us 131.00 us 193833.00 us 4151 READDuration: 6958 secondsData Read: 2782908225 bytesData Written: 193799680 bytesgluster> volume info engineVolume Name: engineType: ReplicateVolume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: StartedSnapshot Count: 0Number of Bricks: 1 x (2 + 1) = 3Transport-type: tcpBricks:Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured:diagnostics.count-fop-hits: ondiagnostics.latency-measurement: on performance.strict-o-direct: onnfs.disable: onuser.cifs: offnetwork.ping-timeout: 30cluster.shd-max-threads: 6cluster.shd-wait-qlength: 10000cluster.locking-scheme: granularcluster.data-self-heal-algorithm: full performance.low-prio-threads: 32features.shard-block-size: 512MBfeatures.shard: onstorage.owner-gid: 36storage.owner-uid: 36cluster.server-quorum-type: servercluster.quorum-type: autonetwork.remote-dio: offcluster.eager-lock: offperformance.stat-prefetch: offperformance.io-cache: offperformance.read-ahead: offperformance.quick-read: offperformance.readdir-ahead: ongeo-replication.indexing: ongeo-replication.ignore-pid-check: on changelog.changelog: onOn Tue, May 29, 2018 at 9:17 PM, Krutika Dhananjay <kdhananj@xxxxxxxxxx> wrote:Adding Ravi to look into the heal issue.As for the fsync hang and subsequent IO errors, it seems a lot like https://bugzilla.redhat.com/show_bug.cgi?id=1497156 and Paolo Bonzini from qemu had pointed out that this would be fixed by the following commit:commit e72c9a2a67a6400c8ef3d01d4c461dbbbfa0e1f0 Author: Paolo Bonzini <pbonzini@xxxxxxxxxx> Date: Wed Jun 21 16:35:46 2017 +0200 scsi: virtio_scsi: let host do exception handling virtio_scsi tries to do exception handling after the default 30 seconds timeout expires. However, it's better to let the host control the timeout, otherwise with a heavy I/O load it is likely that an abort will also timeout. This leads to fatal errors like filesystems going offline. Disable the 'sd' timeout and allow the host to do exception handling, following the precedent of the storvsc driver. Hannes has a proposal to introduce timeouts in virtio, but this provides an immediate solution for stable kernels too. [mkp: fixed typo] Reported-by: Douglas Miller <dougmill@xxxxxxxxxxxxxxxxxx> Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxxxxxxx> Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx> Cc: Hannes Reinecke <hare@xxxxxxx> Cc: linux-scsi@xxxxxxxxxxxxxxx Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Adding Paolo/Kevin to comment.As for the poor gluster performance, could you disable cluster.eager-lock and see if that makes any difference:# gluster volume set <VOL> cluster.eager-lock offDo also capture the volume profile again if you still see performance issues after disabling eager-lock.-KrutikaOn Wed, May 30, 2018 at 6:55 AM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:List Archives: https://lists.ovirt.org/archivI also finally found the following in my system log on one server:[10679.524491] INFO: task glusterclogro:14933 blocked for more than 120 seconds.[10679.525826] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.527144] glusterclogro D ffff97209832bf40 0 14933 1 0x00000080[10679.527150] Call Trace:[10679.527161] [<ffffffffb9913f79>] schedule+0x29/0x70[10679.527218] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][10679.527225] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[10679.527254] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs][10679.527260] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[10679.527268] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [10679.527271] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20[10679.527275] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[10679.527279] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [10679.527283] INFO: task glusterposixfsy:14941 blocked for more than 120 seconds.[10679.528608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.529956] glusterposixfsy D ffff972495f84f10 0 14941 1 0x00000080[10679.529961] Call Trace:[10679.529966] [<ffffffffb9913f79>] schedule+0x29/0x70[10679.530003] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][10679.530008] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[10679.530038] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs][10679.530042] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[10679.530046] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [10679.530050] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20[10679.530054] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[10679.530058] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [10679.530062] INFO: task glusteriotwr13:15486 blocked for more than 120 seconds.[10679.531805] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.533732] glusteriotwr13 D ffff9720a83f0000 0 15486 1 0x00000080[10679.533738] Call Trace:[10679.533747] [<ffffffffb9913f79>] schedule+0x29/0x70[10679.533799] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][10679.533806] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[10679.533846] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs][10679.533852] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[10679.533858] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [10679.533863] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20[10679.533868] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[10679.533873] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [10919.512757] INFO: task glusterclogro:14933 blocked for more than 120 seconds.[10919.514714] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10919.516663] glusterclogro D ffff97209832bf40 0 14933 1 0x00000080[10919.516677] Call Trace:[10919.516690] [<ffffffffb9913f79>] schedule+0x29/0x70[10919.516696] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0[10919.516703] [<ffffffffb951cc04>] ? blk_finish_plug+0x14/0x40[10919.516768] [<ffffffffc05e9224>] ? _xfs_buf_ioapply+0x334/0x460 [xfs][10919.516774] [<ffffffffb991432d>] wait_for_completion+0xfd/0x140[10919.516782] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[10919.516821] [<ffffffffc05eb0a3>] ? _xfs_buf_read+0x23/0x40 [xfs][10919.516859] [<ffffffffc05eafa9>] xfs_buf_submit_wait+0xf9/0x1d0 [xfs][10919.516902] [<ffffffffc061b279>] ? xfs_trans_read_buf_map+0x199/0x400 [xfs] [10919.516940] [<ffffffffc05eb0a3>] _xfs_buf_read+0x23/0x40 [xfs][10919.516977] [<ffffffffc05eb1b9>] xfs_buf_read_map+0xf9/0x160 [xfs][10919.517022] [<ffffffffc061b279>] xfs_trans_read_buf_map+0x199/0x400 [xfs] [10919.517057] [<ffffffffc05c8d04>] xfs_da_read_buf+0xd4/0x100 [xfs][10919.517091] [<ffffffffc05c8d53>] xfs_da3_node_read+0x23/0xd0 [xfs][10919.517126] [<ffffffffc05c9fee>] xfs_da3_node_lookup_int+0x6e/0x2f0 [xfs] [10919.517160] [<ffffffffc05d5a1d>] xfs_dir2_node_lookup+0x4d/0x170 [xfs] [10919.517194] [<ffffffffc05ccf5d>] xfs_dir_lookup+0x1bd/0x1e0 [xfs][10919.517233] [<ffffffffc05fd8d9>] xfs_lookup+0x69/0x140 [xfs][10919.517271] [<ffffffffc05fa018>] xfs_vn_lookup+0x78/0xc0 [xfs][10919.517278] [<ffffffffb9425cf3>] lookup_real+0x23/0x60[10919.517283] [<ffffffffb9426702>] __lookup_hash+0x42/0x60[10919.517288] [<ffffffffb942d519>] SYSC_renameat2+0x3a9/0x5a0[10919.517296] [<ffffffffb94d3753>] ? selinux_file_free_security+0x23/0x30 [10919.517304] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [10919.517309] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [10919.517313] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [10919.517318] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [10919.517323] [<ffffffffb942e58e>] SyS_renameat2+0xe/0x10[10919.517328] [<ffffffffb942e5ce>] SyS_rename+0x1e/0x20[10919.517333] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[10919.517339] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [11159.496095] INFO: task glusteriotwr9:15482 blocked for more than 120 seconds.[11159.497546] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11159.498978] glusteriotwr9 D ffff971fa0fa1fa0 0 15482 1 0x00000080[11159.498984] Call Trace:[11159.498995] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50[11159.498999] [<ffffffffb9913f79>] schedule+0x29/0x70[11159.499003] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0[11159.499056] [<ffffffffc05dd9b7>] ? xfs_iext_bno_to_ext+0xa7/0x1a0 [xfs][11159.499082] [<ffffffffc05dd43e>] ? xfs_iext_bno_to_irec+0x8e/0xd0 [xfs][11159.499090] [<ffffffffb92f7a12>] ? ktime_get_ts64+0x52/0xf0[11159.499093] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50[11159.499097] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130[11159.499101] [<ffffffffb9913528>] io_schedule+0x18/0x20[11159.499104] [<ffffffffb9911f11>] bit_wait_io+0x11/0x50[11159.499107] [<ffffffffb9911ac1>] __wait_on_bit_lock+0x61/0xc0[11159.499113] [<ffffffffb9393634>] __lock_page+0x74/0x90[11159.499118] [<ffffffffb92bc210>] ? wake_bit_function+0x40/0x40[11159.499121] [<ffffffffb9394154>] __find_lock_page+0x54/0x70[11159.499125] [<ffffffffb9394e85>] grab_cache_page_write_begin+0x55/0xc0 [11159.499130] [<ffffffffb9484b76>] iomap_write_begin+0x66/0x100[11159.499135] [<ffffffffb9484edf>] iomap_write_actor+0xcf/0x1d0[11159.499140] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80[11159.499144] [<ffffffffb94854e7>] iomap_apply+0xb7/0x150[11159.499149] [<ffffffffb9485621>] iomap_file_buffered_write+0xa1/0xe0 [11159.499153] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80[11159.499182] [<ffffffffc05f025d>] xfs_file_buffered_aio_write+0x12d/0x2c0 [xfs] [11159.499213] [<ffffffffc05f057d>] xfs_file_aio_write+0x18d/0x1b0 [xfs][11159.499217] [<ffffffffb941a533>] do_sync_write+0x93/0xe0[11159.499222] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0[11159.499225] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0[11159.499230] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [11159.499234] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[11159.499238] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [11279.488720] INFO: task xfsaild/dm-10:1134 blocked for more than 120 seconds.[11279.490197] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.491665] xfsaild/dm-10 D ffff9720a8660fd0 0 1134 2 0x00000000[11279.491671] Call Trace:[11279.491682] [<ffffffffb92a3a2e>] ? try_to_del_timer_sync+0x5e/0x90 [11279.491688] [<ffffffffb9913f79>] schedule+0x29/0x70[11279.491744] [<ffffffffc060de36>] _xfs_log_force+0x1c6/0x2c0 [xfs][11279.491750] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[11279.491783] [<ffffffffc0619fec>] ? xfsaild+0x16c/0x6f0 [xfs][11279.491817] [<ffffffffc060df5c>] xfs_log_force+0x2c/0x70 [xfs][11279.491849] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [11279.491880] [<ffffffffc0619fec>] xfsaild+0x16c/0x6f0 [xfs][11279.491913] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [11279.491919] [<ffffffffb92bb161>] kthread+0xd1/0xe0[11279.491926] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40[11279.491932] [<ffffffffb9920677>] ret_from_fork_nospec_begin+0x21/0x21 [11279.491936] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40[11279.491976] INFO: task glusterclogfsyn:14934 blocked for more than 120 seconds.[11279.493466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.494952] glusterclogfsyn D ffff97209832af70 0 14934 1 0x00000080[11279.494957] Call Trace:[11279.494979] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [11279.494983] [<ffffffffb9913f79>] schedule+0x29/0x70[11279.494987] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0[11279.494997] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0 [dm_mod][11279.495001] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130[11279.495005] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x140 [11279.495010] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[11279.495016] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110[11279.495049] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [11279.495079] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs][11279.495086] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[11279.495090] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [11279.495094] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20[11279.495098] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[11279.495102] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [11279.495105] INFO: task glusterposixfsy:14941 blocked for more than 120 seconds.[11279.496606] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.498114] glusterposixfsy D ffff972495f84f10 0 14941 1 0x00000080[11279.498118] Call Trace:[11279.498134] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [11279.498138] [<ffffffffb9913f79>] schedule+0x29/0x70[11279.498142] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0[11279.498152] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0 [dm_mod][11279.498156] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130[11279.498160] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x140 [11279.498165] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[11279.498169] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110[11279.498202] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [11279.498231] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs][11279.498238] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[11279.498242] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [11279.498246] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20[11279.498250] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[11279.498254] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [11279.498257] INFO: task glusteriotwr1:14950 blocked for more than 120 seconds.[11279.499789] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.501343] glusteriotwr1 D ffff97208b6daf70 0 14950 1 0x00000080[11279.501348] Call Trace:[11279.501353] [<ffffffffb9913f79>] schedule+0x29/0x70[11279.501390] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][11279.501396] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[11279.501428] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs][11279.501432] [<ffffffffb944ef3f>] generic_write_sync+0x4f/0x70[11279.501461] [<ffffffffc05f0545>] xfs_file_aio_write+0x155/0x1b0 [xfs][11279.501466] [<ffffffffb941a533>] do_sync_write+0x93/0xe0[11279.501471] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0[11279.501475] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0[11279.501479] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [11279.501483] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[11279.501489] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [11279.501493] INFO: task glusteriotwr4:14953 blocked for more than 120 seconds.[11279.503047] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.504630] glusteriotwr4 D ffff972499f2bf40 0 14953 1 0x00000080[11279.504635] Call Trace:[11279.504640] [<ffffffffb9913f79>] schedule+0x29/0x70[11279.504676] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs][11279.504681] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20[11279.504710] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs][11279.504714] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0[11279.504718] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/0x160 [11279.504722] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20[11279.504725] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21[11279.504730] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/0x160 [12127.466494] perf: interrupt took too long (8263 > 8150), lowering kernel.perf_event_max_sample_rate to 24000 --------------------I think this is the cause of the massive ovirt performance issues irrespective of gluster volume. At the time this happened, I was also ssh'ed into the host, and was doing some rpm querry commands. I had just run rpm -qa |grep glusterfs (to verify what version was actually installed), and that command took almost 2 minutes to return! Normally it takes less than 2 seconds. That is all pure local SSD IO, too....I'm no expert, but its my understanding that anytime a software causes these kinds of issues, its a serious bug in the software, even if its mis-handled exceptions. Is this correct?--JimOn Tue, May 29, 2018 at 3:01 PM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:I think this is the profile information for one of the volumes that lives on the SSDs and is fully operational with no down/problem disks:[root@ovirt2 yum.repos.d]# gluster volume profile data infoBrick: ovirt2.nwfiber.com:/gluster/brick2/data ---------------------------------------------- Cumulative Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 983 2696 1059No. of Writes: 0 1113 302Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 852 88608 53526No. of Writes: 522 812340 76257Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 54351 241901 15024No. of Writes: 21636 8656 8976Block Size: 131072b+No. of Reads: 524156No. of Writes: 296071%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 4189 RELEASE0.00 0.00 us 0.00 us 0.00 us 1257 RELEASEDIR0.00 46.19 us 12.00 us 187.00 us 69 FLUSH0.00 147.00 us 78.00 us 367.00 us 86 REMOVEXATTR0.00 223.46 us 24.00 us 1166.00 us 149 READDIR0.00 565.34 us 76.00 us 3639.00 us 88 FTRUNCATE0.00 263.28 us 20.00 us 28385.00 us 228 LK0.00 98.84 us 2.00 us 880.00 us 1198 OPENDIR0.00 91.59 us 26.00 us 10371.00 us 3853 STATFS0.00 494.14 us 17.00 us 193439.00 us 1171 GETXATTR0.00 299.42 us 35.00 us 9799.00 us 2044 READDIRP0.00 1965.31 us 110.00 us 382258.00 us 321 XATTROP0.01 113.40 us 24.00 us 61061.00 us 8134 STAT0.01 755.38 us 57.00 us 607603.00 us 3196 DISCARD0.05 2690.09 us 58.00 us 2704761.00 us 3206 OPEN0.10 119978.25 us 97.00 us 9406684.00 us 154 SETATTR0.18 101.73 us 28.00 us 700477.00 us 313379 FSTAT0.23 1059.84 us 25.00 us 2716124.00 us 38255 LOOKUP0.47 1024.11 us 54.00 us 6197164.00 us 81455 FXATTROP1.72 2984.00 us 15.00 us 37098954.00 us 103020 FINODELK5.92 44315.32 us 51.00 us 24731536.00 us 23957 FSYNC13.27 2399.78 us 25.00 us 22089540.00 us 991005 READ37.00 5980.43 us 52.00 us 22099889.00 us 1108976 WRITE41.04 5452.75 us 13.00 us 22102452.00 us 1349053 INODELKDuration: 10026 secondsData Read: 80046027759 bytesData Written: 44496632320 bytesInterval 1 Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 983 2696 1059No. of Writes: 0 838 185Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 852 85856 51575No. of Writes: 382 705802 57812Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 52673 232093 14984No. of Writes: 13499 4908 4242Block Size: 131072b+No. of Reads: 460040No. of Writes: 6411%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 2093 RELEASE0.00 0.00 us 0.00 us 0.00 us 1093 RELEASEDIR0.00 53.38 us 26.00 us 111.00 us 16 FLUSH0.00 145.14 us 78.00 us 367.00 us 71 REMOVEXATTR0.00 190.96 us 114.00 us 298.00 us 71 SETATTR0.00 213.38 us 24.00 us 1145.00 us 90 READDIR0.00 263.28 us 20.00 us 28385.00 us 228 LK0.00 101.76 us 2.00 us 880.00 us 1093 OPENDIR0.01 93.60 us 27.00 us 10371.00 us 3090 STATFS0.02 537.47 us 17.00 us 193439.00 us 1038 GETXATTR0.03 297.44 us 35.00 us 9799.00 us 1990 READDIRP0.03 2357.28 us 110.00 us 382258.00 us 253 XATTROP0.04 385.93 us 58.00 us 47593.00 us 2091 OPEN0.04 114.86 us 24.00 us 61061.00 us 7715 STAT0.06 444.59 us 57.00 us 333240.00 us 3053 DISCARD0.42 316.24 us 25.00 us 290728.00 us 29823 LOOKUP0.73 257.92 us 54.00 us 344812.00 us 63296 FXATTROP1.37 98.30 us 28.00 us 67621.00 us 313172 FSTAT1.58 2124.69 us 51.00 us 849200.00 us 16717 FSYNC5.73 162.46 us 52.00 us 748492.00 us 794079 WRITE7.19 2065.17 us 16.00 us 37098954.00 us 78381 FINODELK36.44 886.32 us 25.00 us 2216436.00 us 925421 READ46.30 1178.04 us 13.00 us 1700704.00 us 884635 INODELKDuration: 7485 secondsData Read: 71250527215 bytesData Written: 5119903744 bytesBrick: ovirt3.nwfiber.com:/gluster/brick2/data ---------------------------------------------- Cumulative Stats:Block Size: 1b+No. of Reads: 0No. of Writes: 3264419%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 90 FORGET0.00 0.00 us 0.00 us 0.00 us 9462 RELEASE0.00 0.00 us 0.00 us 0.00 us 4254 RELEASEDIR0.00 50.52 us 13.00 us 190.00 us 71 FLUSH0.00 186.97 us 87.00 us 713.00 us 86 REMOVEXATTR0.00 79.32 us 33.00 us 189.00 us 228 LK0.00 220.98 us 129.00 us 513.00 us 86 SETATTR0.01 259.30 us 26.00 us 2632.00 us 137 READDIR0.02 322.76 us 145.00 us 2125.00 us 321 XATTROP0.03 109.55 us 2.00 us 1258.00 us 1193 OPENDIR0.05 70.21 us 21.00 us 431.00 us 3196 DISCARD0.05 169.26 us 21.00 us 2315.00 us 1545 GETXATTR0.12 176.85 us 63.00 us 2844.00 us 3206 OPEN0.61 303.49 us 90.00 us 3085.00 us 9633 FSTAT2.44 305.66 us 28.00 us 3716.00 us 38230 LOOKUP4.52 266.22 us 55.00 us 53424.00 us 81455 FXATTROP6.96 1397.99 us 51.00 us 64822.00 us 23889 FSYNC16.48 84.74 us 25.00 us 6917.00 us 932592 WRITE30.16 106.90 us 13.00 us 3920189.00 us 1353046 INODELK38.55 1794.52 us 14.00 us 16210553.00 us 103039 FINODELKDuration: 66562 secondsData Read: 0 bytesData Written: 3264419 bytesInterval 1 Stats:Block Size: 1b+No. of Reads: 0No. of Writes: 794080%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 2093 RELEASE0.00 0.00 us 0.00 us 0.00 us 1093 RELEASEDIR0.00 70.31 us 26.00 us 125.00 us 16 FLUSH0.00 193.10 us 103.00 us 713.00 us 71 REMOVEXATTR0.01 227.32 us 133.00 us 513.00 us 71 SETATTR0.01 79.32 us 33.00 us 189.00 us 228 LK0.01 259.83 us 35.00 us 1138.00 us 89 READDIR0.03 318.26 us 145.00 us 2047.00 us 253 XATTROP0.04 112.67 us 3.00 us 1258.00 us 1093 OPENDIR0.06 167.98 us 23.00 us 1951.00 us 1014 GETXATTR0.08 70.97 us 22.00 us 431.00 us 3053 DISCARD0.13 183.78 us 66.00 us 2844.00 us 2091 OPEN1.01 303.82 us 90.00 us 3085.00 us 9610 FSTAT3.27 316.59 us 30.00 us 3716.00 us 29820 LOOKUP5.83 265.79 us 59.00 us 53424.00 us 63296 FXATTROP7.95 1373.89 us 51.00 us 64822.00 us 16717 FSYNC23.17 851.99 us 14.00 us 16210553.00 us 78555 FINODELK24.04 87.44 us 27.00 us 6917.00 us 794081 WRITE34.36 111.91 us 14.00 us 984871.00 us 886790 INODELKDuration: 7485 secondsData Read: 0 bytesData Written: 794080 bytes-----------------------Here is the data from the volume that is backed by the SHDDs and has one failed disk:[root@ovirt2 yum.repos.d]# gluster volume profile data-hdd infoBrick: 172.172.1.12:/gluster/brick3/data-hdd -------------------------------------------- Cumulative Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 1702 86 16No. of Writes: 0 767 71Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 19 51841 2049No. of Writes: 76 60668 35727Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 1744 639 1088No. of Writes: 8524 2410 1285Block Size: 131072b+No. of Reads: 771999No. of Writes: 29584%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 2902 RELEASE0.00 0.00 us 0.00 us 0.00 us 1517 RELEASEDIR0.00 197.00 us 197.00 us 197.00 us 1 FTRUNCATE0.00 70.24 us 16.00 us 758.00 us 51 FLUSH0.00 143.93 us 82.00 us 305.00 us 57 REMOVEXATTR0.00 178.63 us 105.00 us 712.00 us 60 SETATTR0.00 67.30 us 19.00 us 572.00 us 555 LK0.00 322.80 us 23.00 us 4673.00 us 138 READDIR0.00 336.56 us 106.00 us 11994.00 us 237 XATTROP0.00 84.70 us 28.00 us 1071.00 us 3469 STATFS0.01 387.75 us 2.00 us 146017.00 us 1467 OPENDIR0.01 148.59 us 21.00 us 64374.00 us 4454 STAT0.02 783.02 us 16.00 us 93502.00 us 1902 GETXATTR0.03 1516.10 us 17.00 us 210690.00 us 1364 ENTRYLK0.03 2555.47 us 300.00 us 674454.00 us 1064 READDIRP0.07 85.74 us 19.00 us 68340.00 us 62849 FSTAT0.07 1978.12 us 59.00 us 202596.00 us 2729 OPEN0.22 708.57 us 15.00 us 394799.00 us 25447 LOOKUP5.94 2331.74 us 15.00 us 1099530.00 us 207534 FINODELK7.31 8311.75 us 58.00 us 1800216.00 us 71668 FXATTROP12.49 7735.19 us 51.00 us 3595513.00 us 131642 WRITE17.70 957.08 us 16.00 us 13700466.00 us 1508160 INODELK24.55 2546.43 us 26.00 us 5077347.00 us 786060 READ31.56 49699.15 us 47.00 us 3746331.00 us 51777 FSYNCDuration: 10101 secondsData Read: 101562897361 bytesData Written: 4834450432 bytesInterval 0 Stats:Block Size: 256b+ 512b+ 1024b+No. of Reads: 1702 86 16No. of Writes: 0 767 71Block Size: 2048b+ 4096b+ 8192b+No. of Reads: 19 51841 2049No. of Writes: 76 60668 35727Block Size: 16384b+ 32768b+ 65536b+No. of Reads: 1744 639 1088No. of Writes: 8524 2410 1285Block Size: 131072b+No. of Reads: 771999No. of Writes: 29584%-latency Avg-latency Min-Latency Max-Latency No. of calls Fop--------- ----------- ----------- ----------- ------------ ----0.00 0.00 us 0.00 us 0.00 us 2902 RELEASE0.00 0.00 us 0.00 us 0.00 us 1517 RELEASEDIR0.00 197.00 us 197.00 us 197.00 us 1 FTRUNCATE0.00 70.24 us 16.00 us 758.00 us 51 FLUSH0.00 143.93 us 82.00 us 305.00 us 57 REMOVEXATTR0.00 178.63 us 105.00 us 712.00 us 60 SETATTR0.00 67.30 us 19.00 us 572.00 us 555 LK0.00 322.80 us 23.00 us 4673.00 us 138 READDIR0.00 336.56 us 106.00 us 11994.00 us 237 XATTROP0.00 84.70 us 28.00 us 1071.00 us 3469 STATFS0.01 387.75 us 2.00 us 146017.00 us 1467 OPENDIR0.01 148.59 us 21.00 us 64374.00 us 4454 STAT0.02 783.02 us 16.00 us 93502.00 us 1902 GETXATTR0.03 1516.10 us 17.00 us 210690.00 us 1364 ENTRYLK0.03 2555.47 us 300.00 us 674454.00 us 1064 READDIRP0.07 85.73 us 19.00 us 68340.00 us 62849 FSTAT0.07 1978.12 us 59.00 us 202596.00 us 2729 OPEN0.22 708.57 us 15.00 us 394799.00 us 25447 LOOKUP5.94 2334.57 us 15.00 us 1099530.00 us 207534 FINODELK7.31 8311.49 us 58.00 us 1800216.00 us 71668 FXATTROP12.49 7735.32 us 51.00 us 3595513.00 us 131642 WRITE17.71 957.08 us 16.00 us 13700466.00 us 1508160 INODELK24.56 2546.42 us 26.00 us 5077347.00 us 786060 READ31.54 49651.63 us 47.00 us 3746331.00 us 51777 FSYNCDuration: 10101 secondsData Read: 101562897361 bytesData Written: 4834450432 bytesOn Tue, May 29, 2018 at 2:55 PM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:Thank you for your response.I have 4 gluster volumes. 3 are replica 2 + arbitrator. replica bricks are on ovirt1 and ovirt2, arbitrator on ovirt3. The 4th volume is replica 3, with a brick on all three ovirt machines.The first 3 volumes are on an SSD disk; the 4th is on a Seagate SSHD (same in all three machines). On ovirt3, the SSHD has reported hard IO failures, and that brick is offline. However, the other two replicas are fully operational (although they still show contents in the heal info command that won't go away, but that may be the case until I replace the failed disk).What is bothering me is that ALL 4 gluster volumes are showing horrible performance issues. At this point, as the bad disk has been completely offlined, I would expect gluster to perform at normal speed, but that is definitely not the case.I've also noticed that the performance hits seem to come in waves: things seem to work acceptably (but slow) for a while, then suddenly, its as if all disk IO on all volumes (including non-gluster local OS disk volumes for the hosts) pause for about 30 seconds, then IO resumes again. During those times, I start getting VM not responding and host not responding notices as well as the applications having major issues.I've shut down most of my VMs and am down to just my essential core VMs (shedded about 75% of my VMs). I still am experiencing the same issues.Am I correct in believing that once the failed disk was brought offline that performance should return to normal?On Tue, May 29, 2018 at 1:27 PM, Alex K <rightkicktech@xxxxxxxxx> wrote:I would check disks status and accessibility of mount points where your gluster volumes reside.On Tue, May 29, 2018, 22:28 Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:List Archives: https://lists.ovirt.org/archivOn one ovirt server, I'm now seeing these messages:[56474.239725] blk_update_request: 63 callbacks suppressed[56474.239732] blk_update_request: I/O error, dev dm-2, sector 0[56474.240602] blk_update_request: I/O error, dev dm-2, sector 3905945472[56474.241346] blk_update_request: I/O error, dev dm-2, sector 3905945584[56474.242236] blk_update_request: I/O error, dev dm-2, sector 2048[56474.243072] blk_update_request: I/O error, dev dm-2, sector 3905943424[56474.243997] blk_update_request: I/O error, dev dm-2, sector 3905943536[56474.247347] blk_update_request: I/O error, dev dm-2, sector 0[56474.248315] blk_update_request: I/O error, dev dm-2, sector 3905945472[56474.249231] blk_update_request: I/O error, dev dm-2, sector 3905945584[56474.250221] blk_update_request: I/O error, dev dm-2, sector 2048______________________________On Tue, May 29, 2018 at 11:59 AM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:I see in messages on ovirt3 (my 3rd machine, the one upgraded to 4.2):May 29 11:54:41 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) May 29 11:54:51 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) May 29 11:55:01 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) (appears a lot).I also found on the ssh session of that, some sysv warnings about the backing disk for one of the gluster volumes (straight replica 3). The glusterfs process for that disk on that machine went offline. Its my understanding that it should continue to work with the other two machines while I attempt to replace that disk, right? Attempted writes (touching an empty file) can take 15 seconds, repeating it later will be much faster.Gluster generates a bunch of different log files, I don't know what ones you want, or from which machine(s).How do I do "volume profiling"?Thanks!On Tue, May 29, 2018 at 11:53 AM, Sahina Bose <sabose@xxxxxxxxxx> wrote:Do you see errors reported in the mount logs for the volume? If so, could you attach the logs?Any issues with your underlying disks. Can you also attach output of volume profiling?On Wed, May 30, 2018 at 12:13 AM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:Ok, things have gotten MUCH worse this morning. I'm getting random errors from VMs, right now, about a third of my VMs have been paused due to storage issues, and most of the remaining VMs are not performing well.At this point, I am in full EMERGENCY mode, as my production services are now impacted, and I'm getting calls coming in with problems...I'd greatly appreciate help...VMs are running VERY slowly (when they run), and they are steadily getting worse. I don't know why. I was seeing CPU peaks (to 100%) on several VMs, in perfect sync, for a few minutes at a time (while the VM became unresponsive and any VMs I was logged into that were linux were giving me the CPU stuck messages in my origional post). Is all this storage related?I also have two different gluster volumes for VM storage, and only one had the issues, but now VMs in both are being affected at the same time and same way.--JimOn Mon, May 28, 2018 at 10:50 PM, Sahina Bose <sabose@xxxxxxxxxx> wrote:[Adding gluster-users to look at the heal issue]On Tue, May 29, 2018 at 9:17 AM, Jim Kusznir <jim@xxxxxxxxxxxxxxx> wrote:______________________________Hello:I've been having some cluster and gluster performance issues lately. I also found that my cluster was out of date, and was trying to apply updates (hoping to fix some of these), and discovered the ovirt 4.1 repos were taken completely offline. So, I was forced to begin an upgrade to 4.2. According to docs I found/read, I needed only add the new repo, do a yum update, reboot, and be good on my hosts (did the yum update, the engine-setup on my hosted engine). Things seemed to work relatively well, except for a gluster sync issue that showed up.My cluster is a 3 node hyperconverged cluster. I upgraded the hosted engine first, then engine 3. When engine 3 came back up, for some reason one of my gluster volumes would not sync. Here's sample output:[root@ovirt3 ~]# gluster volume heal data-hdd infoBrick 172.172.1.11:/gluster/brick3/data-hdd /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 725-bca5-b3519681cf2f/0d6080b0 -7018-4fa3-bb82-1dd9ef07d9b9 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 cdc-85bd-ba72544c2631/b453a300 -0602-4be1-8310-8bd5abe00971 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 46b-9bf0-90a0dbbea830/3c93bd1f -b7fa-4aa2-b445-6904e31839ba /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 4f1-a58e-9b8865833acb/f9364470 -9770-4bb1-a6b9-a54861849625 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 2a7-93d4-e0a4df6dd2fa/2eb0b1ad -2606-44ef-9cd3-ae59610a504b /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 ded-8c82-9c91c90e0b61/d5d6bf5a -499f-431d-9013-5453db93ed32 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 810-b45b-185e3ed65727/16f08231 -93b0-489d-a2fd-687b6bf88eaa /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 aab-ba19-1c1bc31310ef/07b3db69 -440e-491e-854c-bbfa18a7cff2 Status: ConnectedNumber of entries: 8Brick 172.172.1.12:/gluster/brick3/data-hdd /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 725-bca5-b3519681cf2f/0d6080b0 -7018-4fa3-bb82-1dd9ef07d9b9 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 cdc-85bd-ba72544c2631/b453a300 -0602-4be1-8310-8bd5abe00971 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 ded-8c82-9c91c90e0b61/d5d6bf5a -499f-431d-9013-5453db93ed32 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 46b-9bf0-90a0dbbea830/3c93bd1f -b7fa-4aa2-b445-6904e31839ba /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 4f1-a58e-9b8865833acb/f9364470 -9770-4bb1-a6b9-a54861849625 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 810-b45b-185e3ed65727/16f08231 -93b0-489d-a2fd-687b6bf88eaa /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 aab-ba19-1c1bc31310ef/07b3db69 -440e-491e-854c-bbfa18a7cff2 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 2a7-93d4-e0a4df6dd2fa/2eb0b1ad -2606-44ef-9cd3-ae59610a504b Status: ConnectedNumber of entries: 8Brick 172.172.1.13:/gluster/brick3/data-hdd /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 ded-8c82-9c91c90e0b61/d5d6bf5a -499f-431d-9013-5453db93ed32 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 810-b45b-185e3ed65727/16f08231 -93b0-489d-a2fd-687b6bf88eaa /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 aab-ba19-1c1bc31310ef/07b3db69 -440e-491e-854c-bbfa18a7cff2 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 2a7-93d4-e0a4df6dd2fa/2eb0b1ad -2606-44ef-9cd3-ae59610a504b /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 cdc-85bd-ba72544c2631/b453a300 -0602-4be1-8310-8bd5abe00971 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 725-bca5-b3519681cf2f/0d6080b0 -7018-4fa3-bb82-1dd9ef07d9b9 /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 46b-9bf0-90a0dbbea830/3c93bd1f -b7fa-4aa2-b445-6904e31839ba /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 4f1-a58e-9b8865833acb/f9364470 -9770-4bb1-a6b9-a54861849625 Status: ConnectedNumber of entries: 8---------Its been in this state for a couple days now, and bandwidth monitoring shows no appreciable data moving. I've tried repeatedly commanding a full heal from all three clusters in the node. Its always the same files that need healing.When running gluster volume heal data-hdd statistics, I see sometimes different information, but always some number of "heal failed" entries. It shows 0 for split brain.I'm not quite sure what to do. I suspect it may be due to nodes 1 and 2 still being on the older ovirt/gluster release, but I'm afraid to upgrade and reboot them until I have a good gluster sync (don't need to create a split brain issue). How do I proceed with this?Second issue: I've been experiencing VERY POOR performance on most of my VMs. To the tune that logging into a windows 10 vm via remote desktop can take 5 minutes, launching quickbooks inside said vm can easily take 10 minutes. On some linux VMs, I get random messages like this:Message from syslogd@unifi at May 28 20:39:23 ...kernel:[6171996.308904] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [mongod:14766](the process and PID are often different)I'm not quite sure what to do about this either. My initial thought was upgrad everything to current and see if its still there, but I cannot move forward with that until my gluster is healed...Thanks!--Jim_________________
Users mailing list -- users@xxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxx
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@xxxxxxxxx/messag e/3LEV6ZQ3JV2XLAL7NYBTXOYMYUOT IRQF/
_________________
Users mailing list -- users@xxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxx
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ es/list/users@xxxxxxxxx/messag e/ACO7RFSLBSRBAIONIC2HQ6Z24ZDE S5MF/
_______________________________________________
Users mailing list -- users@xxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxx
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ es/list/users@xxxxxxxxx/messag e/3DEQQLJM3WHQNZJ7KEMRZVFZ52MT IL74/
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users