Re: RDMA Client Hang Problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for your mail.

ibv_rc_pingpong seems working between servers and client. Also udaddy, ucmatose, rping etc are working.

root@gluster1:~# ibv_rc_pingpong -d mlx5_0 -g 0
  local address:  LID 0x0000, QPN 0x0001e4, PSN 0x10090e, GID fe80::ee0d:9aff:fec0:1dc8
  remote address: LID 0x0000, QPN 0x00014c, PSN 0x09402b, GID fe80::ee0d:9aff:fec0:1b14
8192000 bytes in 0.01 seconds = 7964.03 Mbit/sec
1000 iters in 0.01 seconds = 8.23 usec/iter

root@cinder:~# ibv_rc_pingpong -g 0 -d mlx5_0 gluster1
  local address:  LID 0x0000, QPN 0x00014c, PSN 0x09402b, GID fe80::ee0d:9aff:fec0:1b14
  remote address: LID 0x0000, QPN 0x0001e4, PSN 0x10090e, GID fe80::ee0d:9aff:fec0:1dc8
8192000 bytes in 0.01 seconds = 8424.73 Mbit/sec
1000 iters in 0.01 seconds = 7.78 usec/iter


Thank you.

Necati.

On 25-04-2018 12:27, Raghavendra Gowdappa wrote:
Is infiniband itself working fine? You can run tools like ibv_rc_pingpong to find out.

On Wed, Apr 25, 2018 at 12:23 PM, Necati E. SISECI <siseci@xxxxxxxxx> wrote:

Dear Gluster-Users,

I am experiencing RDMA problems.

I have installed Ubuntu 16.04.4 running with 4.15.0-13-generic kernel, MLNX_OFED_LINUX-4.3-1.0.1.0-ubuntu16.04-x86_64 to 4 different servers. All of them has Mellanox ConnectX-4 LX dual port NICs. These four servers are connected via Mellanox SN2100 Switch.

I have installed GlusterFS Server v3.10 (from Ubuntu PPA) to 3 servers. These 3 boxes are running as gluster cluster. Additionally, I have installed Glusterfs Client to the last one.

I have created Gluster Volume with this command:

# gluster volume create db transport rdma replica 3 arbiter 1 gluster1:/storage/db/ gluster2:/storage/db/ cinder:/storage/db force

(network.ping-timeout is 3)

Then I have mounted this volume using mount command below.

mount -t glusterfs -o transport=rdma gluster1:/db /db

After mountings "/db", I can access the files.

The problem is, when I reboot one of the cluster nodes, fuse client gives this error below and hangs.

[2018-04-17 07:42:55.506422] W [MSGID: 103070] [rdma.c:4284:gf_rdma_handle_failed_send_completion] 0-rpc-transport/rdma: send work request on `mlx5_0' returned error wc.status = 5, wc.vendor_err = 245, post->buf = 0x7f8b92016000, wc.byte_len = 0, post->reused = 135

When I change transport mode from rdma to tcp, fuse client works well. No hangs.

I also tried Gluster 3.8, 3.10, 4.0.0 and 4.0.1 (from Ubuntu PPAs) on Ubuntu 16.04.4 and Centos 7.4. But results were the same.

Thank you.

Necati.

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux