Hi,
We're using a 3-node setup where GlusterFS is running as both a client and a server with a fuse mount-point.
We tried to change the performance.parallel-readdir setting to on for a volume, but after that the load on all 3 nodes skyrocketed due to the glusterd process and we saw CPU soft lockup errors in the console.
I had to completely bring down/reboot all 3 nodes and disable the setting again.
There were tons of errors like mentioned below, does anyone know what could cause this?
Nov 10 20:55:53 n01c01 kernel: [196591.960126] BUG: soft lockup - CPU#6 stuck for 22s! [touch:25995]
Nov 10 20:55:53 n01c01 kernel: [196591.960168] Modules linked in: xt_multiport binfmt_misc hcpdriver(PO) nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp xt_conntrack iptable_filter ip_tables x_tables xfs libcrc32c crc32c_generic nls_utf8 nls_cp437 vfat fat x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support kvm_intel kvm crc32_pclmul ast ttm aesni_intel drm_kms_helper efi_pstore aes_x86_64 lrw gf128mul evdev glue_helper ablk_helper joydev cryptd pcspkr efivars drm i2c_algo_bit mei_me lpc_ich mei mfd_core shpchp tpm_tis wmi tpm ipmi_si ipmi_msghandler acpi_pad processor button acpi_power_meter thermal_sys nf_conntrack_ftp nf_conntrack fuse autofs4 ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid hid sg sd_mod crc_t10dif crct10dif_generic ehci_pci xhci_hcd ehci_hcd ahci libahci i2c_i801 crct10dif_pclmul crct10dif_common libata ixgbe i2c_core crc32c_intel dca usbcore scsi_mod ptp usb_common pps_core nvme mdio
Nov 10 20:55:53 n01c01 kernel: [196591.960224] CPU: 6 PID: 25995 Comm: touch Tainted: P O 3.16.0-4-amd64 #1 Debian 3.16.43-2+deb8u5
Nov 10 20:55:53 n01c01 kernel: [196591.960226] Hardware name: Supermicro SYS-1028U-TNR4T+/X10DRU-i+, BIOS 2.0c 04/21/2017
Nov 10 20:55:53 n01c01 kernel: [196591.960228] task: ffff88184bf872f0 ti: ffff88182cbc0000 task.ti: ffff88182cbc0000
Nov 10 20:55:53 n01c01 kernel: [196591.960229] RIP: 0010:[<ffffffff81519fe5>] [<ffffffff81519fe5>] _raw_spin_lock+0x25/0x30
Nov 10 20:55:53 n01c01 kernel: [196591.960237] RSP: 0018:ffff88182cbc3b78 EFLAGS: 00000287
Nov 10 20:55:53 n01c01 kernel: [196591.960239] RAX: 0000000000005e5c RBX: ffffffff811646a5 RCX: 0000000000005e69
Nov 10 20:55:53 n01c01 kernel: [196591.960240] RDX: 0000000000005e69 RSI: ffffffff811bffa0 RDI: ffff88182e42bc70
Nov 10 20:55:53 n01c01 kernel: [196591.960241] RBP: ffff88182e42bc18 R08: 0000000000200008 R09: 0000000000000001
Nov 10 20:55:53 n01c01 kernel: [196591.960242] R10: 0000000000012f40 R11: 0000000000000010 R12: ffff88182cbc3af0
Nov 10 20:55:53 n01c01 kernel: [196591.960243] R13: 0000000000000286 R14: 0000000000000010 R15: ffffffff81519fce
Nov 10 20:55:53 n01c01 kernel: [196591.960244] FS: 00007fc005c67700(0000) GS:ffff88187fc80000(0000) knlGS:0000000000000000
Nov 10 20:55:53 n01c01 kernel: [196591.960246] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Nov 10 20:55:53 n01c01 kernel: [196591.960247] CR2: 00007f498c1ab148 CR3: 0000000b0fcf4000 CR4: 00000000003407e0
Nov 10 20:55:53 n01c01 kernel: [196591.960248] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Nov 10 20:55:53 n01c01 kernel: [196591.960249] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Nov 10 20:55:53 n01c01 kernel: [196591.960250] Stack:
Nov 10 20:55:53 n01c01 kernel: [196591.960251] ffffffff81513196 ffff88182e42bc18 ffff880aa062e8d8 ffff880aa062e858
Nov 10 20:55:53 n01c01 kernel: [196591.960254] ffffffff811c1120 ffff88182cbc3bd0 ffff88182e42bc18 0000000000032b68
Nov 10 20:55:53 n01c01 kernel: [196591.960256] ffff88182943b010 ffffffff811c1988 ffff88182e42bc18 ffff8817de0db218
Nov 10 20:55:53 n01c01 kernel: [196591.960258] Call Trace:
Nov 10 20:55:53 n01c01 kernel: [196591.960263] [<ffffffff81513196>] ? lock_parent.part.17+0x1d/0x43
Nov 10 20:55:53 n01c01 kernel: [196591.960268] [<ffffffff811c1120>] ? shrink_dentry_list+0x1f0/0x240
Nov 10 20:55:53 n01c01 kernel: [196591.960270] [<ffffffff811c1988>] ? check_submounts_and_drop+0x68/0x90
Nov 10 20:55:53 n01c01 kernel: [196591.960278] [<ffffffffa017f7f8>] ? fuse_dentry_revalidate+0x1e8/0x300 [fuse]
Nov 10 20:55:53 n01c01 kernel: [196591.960281] [<ffffffff811b4e5e>] ? lookup_fast+0x25e/0x2b0
Nov 10 20:55:53 n01c01 kernel: [196591.960283] [<ffffffff811b5ebb>] ? link_path_walk+0x1ab/0x870
Nov 10 20:55:53 n01c01 kernel: [196591.960285] [<ffffffff811ba2ec>] ? path_openat+0x9c/0x680
Nov 10 20:55:53 n01c01 kernel: [196591.960289] [<ffffffff8116c0fc>] ? handle_mm_fault+0x63c/0x1150
Nov 10 20:55:53 n01c01 kernel: [196591.960292] [<ffffffff8117253c>] ? mmap_region+0x19c/0x650
Nov 10 20:55:53 n01c01 kernel: [196591.960294] [<ffffffff811bb07a>] ? do_filp_open+0x3a/0x90
Nov 10 20:55:53 n01c01 kernel: [196591.960297] [<ffffffff811c736c>] ? __alloc_fd+0x7c/0x120
Nov 10 20:55:53 n01c01 kernel: [196591.960302] [<ffffffff811aa169>] ? do_sys_open+0x129/0x220
Nov 10 20:55:53 n01c01 kernel: [196591.960305] [<ffffffff8151a48d>] ? system_call_fast_compare_end+0x10/0x15
Nov 10 20:55:53 n01c01 kernel: [196591.960306] Code: 84 00 00 00 00 00 0f 1f 44 00 00 b8 00 00 01 00 f0 0f c1 07 89 c2 c1 ea 10 66 39 c2 89 d1 75 01 c3 0f b7 07 66 39 d0 74 f7 f3 90 <0f> b7 07 66 39 c8 75 f6 c3 66 90 0f 1f 44 00 00 65 81 04 25 60
We are running Debian 8 with Glusterfs 3.12.2
Here are our settings:
gluster volume info
Volume Name: ssl
Type: Replicate
Volume ID: 8aa7bab2-a8dc-4855-ab46-bbcb4a9ff174
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: 10.0.0.1:/storage/gluster/ssl
Brick2: 10.0.0.2:/storage/gluster/ssl
Brick3: 10.0.0.3:/storage/gluster/ssl
Options Reconfigured:
performance.client-io-threads: off
nfs.disable: on
transport.address-family: inet
network.ping-timeout: 5
Volume Name: www
Type: Replicate
Volume ID: d8d87920-f92d-4669-8509-acd1936ba365
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: 10.0.0.1:/storage/gluster/www
Brick2: 10.0.0.2:/storage/gluster/www
Brick3: 10.0.0.3:/storage/gluster/www
Options Reconfigured:
features.scrub: Active
features.bitrot: on
performance.flush-behind: on
network.ping-timeout: 3
features.cache-invalidation-timeout: 600
performance.write-behind-window-size: 4MB
performance.quick-read: off
performance.md-cache-timeout: 600
performance.io-thread-count: 64
cluster.readdir-optimize: on
performance.write-behind: on
performance.readdir-ahead: on
performance.cache-size: 1GB
performance.cache-invalidation: on
features.cache-invalidation: on
diagnostics.brick-log-level: WARNING
performance.cache-priority: *.php:3,*.temp:3,*:1
network.inode-lru-limit: 90000
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: off
performance.parallel-readdir: off
And here are our /etc/fstab entries for the fuse mountpoint:
localhost:/ssl /etc/ssl/shared glusterfs backup-volfile-servers=10.0.0.2:10.0.0.3,log-level=WARNING 0 0
localhost:/www /var/www glusterfs backup-volfile-servers=10.0.0.2:10.0.0.3,log-level=WARNING 0 0
Fuse version:
dpkg -l | grep fuse
ii fuse 2.9.3-15+deb8u2 amd64 Filesystem in Userspace
ii libfuse2:amd64 2.9.3-15+deb8u2 amd64 Filesystem in Userspace (library)
Thank you!
Niels Hendriks
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
