Hi,
I have three servers in the linked list topology [1], GlusterFS 3.8.10, CentOS 7. Each server has two bricks, both on the same XFS filesystem. The XFS is constructed over the whole MD RAID device:
md5 : active raid5 sdj1[6] sdh1[8] sde1[2] sdg1[9] sdd1[1] sdi1[5] sdf1[3] sdc1[0]
6836411904 blocks super 1.2 level 5, 512k chunk, algorithm 2 [8/8] [UUUUUUUU]
bitmap: 2/8 pages [8KB], 65536KB chunk
Everything works fine until one of the RAID devices starts its regular check. During the check, the client's mount sometimes completely stops responding. I'm mounting using the Pacemaker's Filesystem OCF RA [2] with OCF_CHECK_LEVEL=20, which basically tries to write a small status file to the filesystem every 2 minutes to see if its OK. But even this small write operation sometimes times out (2 minutes) during the check. Pacemaker then remounts the Gluster and everything goes back to normal.
I understand that the RAID check is draining a lot of I/O performance, but the underlying XFS remains responsive (of course it is slower, but by far not as much as Gluster). The check intervals on the servers are not overlapping. I've even decreased the /proc/sys/dev/raid/speed_
limit_max from the default 200 MB/s to the 50 MB/s, but it helped only a little, the mount still tends to freeze for a few seconds during the check. What are your suggestions to solve this issue?
Regards,
Jan Wrona
[1] https://joejulian.name/blog/
how-to-expand-glusterfs- replicated-clusters-by-one- server/
[2] https://github.com/ClusterLabs/resource-agents/ blob/master/heartbeat/ Filesystem
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
--
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
