> On 09 May 2017, at 15:53 , knarra <knarra@xxxxxxxxxx> wrote: > > On 05/09/2017 07:21 PM, hvjunk wrote: >> TA!! >> I tried arbiter=1 instead of count :o > okay, Does this work after specifying arbiter_count=1 ? Yes thanks! [root@ds2 ~]# gluster volume info ganesha Volume Name: ganesha Type: Replicate Volume ID: 58d81fc4-2ffc-4185-9d67-0e00c58e8d54 Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: 10.10.10.11:/gluster/brick1/one Brick2: 10.10.10.12:/gluster/brick1/one Brick3: 10.10.10.13:/gluster/brick1/one (arbiter) from: ==snip=== #This will create a volume. Skip this section if your volume already exists [volume] action=create volname=ganesha transport=tcp replica_count=3 arbiter_count=1 force=yes ==snip=== >>> On 09 May 2017, at 15:35 , knarra <knarra@xxxxxxxxxx> wrote: >>> >>> On 05/09/2017 06:36 PM, hvjunk wrote: >>>> Hi there, >>>> >>>> Does gdeploy support volumes with arbiter bricks? >>>> >>>> HEndrik >>>> _______________________________________________ >>>> Gluster-users mailing list >>>> Gluster-users@xxxxxxxxxxx >>>> http://lists.gluster.org/mailman/listinfo/gluster-users >>> Hi hvjunk, >>> >>> yes, it does. In the volume create sections you will have to specify arbiter_count . >>> >>> Thanks >>> >>> kasturi. >>> > _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
