Re: Slow write times to gluster disk

Ravishankar N <ravishankar@xxxxxxxxxx> · Fri, 14 Apr 2017 12:31:41 +0530



    On 04/14/2017 12:20 PM, Pranith Kumar
      Karampuri wrote:

    
          On Sat, Apr 8, 2017 at 10:28 AM,
            Ravishankar N <ravishankar@xxxxxxxxxx>
            wrote:

            
                Hi
                  Pat,

                  
                  I'm assuming you are using gluster native (fuse
                  mount). If it helps, you could try mounting it via
                  gluster NFS (gnfs) and then see if there is an
                  improvement in speed. Fuse mounts are slower than gnfs
                  mounts but you get the benefit of avoiding a single
                  point of failure. Unlike fuse mounts, if the gluster
                  node containing the gnfs server goes down, all mounts
                  done using that node will fail). For fuse mounts, you
                  could try tweaking the write-behind xlator settings to
                  see if it helps. See the performance.write-behind and
                  performance.write-behind-window-size options in
                  `gluster volume set help`. Of course, even for gnfs
                  mounts, you can achieve fail-over by using CTDB.

                
            Ravi,

            
                  Do you have any data that suggests fuse mounts
              are slower than gNFS servers? 

            
    I have heard anecdotal evidence time and again on the ML and IRC,
    which is why I wanted to compare it with NFS numbers on his setup. 

    
            Pat,

            
                  I see that I am late to the thread, but do you
              happen to have "profile info" of the workload?

              
            You can follow https://gluster.readthedocs.io/en/latest/Administrator%20Guide/Monitoring%20Workload/
              to get the information.

            
    Yeah, Let's see if profile info shows up anything interesting.

    -Ravi

    
                  Thanks,

                  Ravi
                  
                    
                      On 04/08/2017 12:07 AM, Pat Haley wrote:

                    
                      Hi,

                      
                      We noticed a dramatic slowness when writing to a
                      gluster disk when compared to writing to an NFS
                      disk. Specifically when using dd (data duplicator)
                      to write a 4.3 GB file of zeros:

                      
                        on NFS disk (/home): 9.5 Gb/s
                        on gluster disk (/gdata): 508 Mb/s

                        
                      The gluser disk is 2 bricks joined together, no
                      replication or anything else. The hardware is
                      (literally) the same:

                      
                        one server with 70 hard disks  and a
                          hardware RAID card.
                        4 disks in a RAID-6 group (the NFS disk)
                        32 disks in a RAID-6 group (the max allowed
                          by the card, /mnt/brick1)
                        32 disks in another RAID-6 group
                          (/mnt/brick2)
                        2 hot spare

                        
                      Some additional information and more tests
                        results (after changing the log level):

                      
                      glusterfs 3.7.11 built on Apr 27 2016
                          14:09:22

                        CentOS release 6.8 (Final)

                        RAID bus controller: LSI Logic / Symbios Logic
                        MegaRAID SAS-3 3108 [Invader] (rev 02)

                        
                        Create the file to /gdata (gluster)

                        [root@mseas-data2 gdata]# dd if=/dev/zero
                        of=/gdata/zero1 bs=1M count=1000

                        1000+0 records in

                        1000+0 records out

                        1048576000 bytes (1.0 GB) copied, 1.91876 s, 546
                          MB/s

                        
                        Create the file to /home (ext4)

                        [root@mseas-data2 gdata]# dd if=/dev/zero
                        of=/home/zero1 bs=1M count=1000

                        1000+0 records in

                        1000+0 records out

                        1048576000 bytes (1.0 GB) copied, 0.686021 s, 1.5
                          GB/s - 3 times as fast

                          
                          Copy from /gdata to /gdata (gluster to
                          gluster)

                        [root@mseas-data2 gdata]# dd if=/gdata/zero1
                        of=/gdata/zero2

                        2048000+0 records in

                        2048000+0 records out

                        1048576000 bytes (1.0 GB) copied, 101.052 s, 10.4
                          MB/s - realllyyy slooowww

                        
                        Copy from /gdata to /gdata 2nd time (gluster
                            to gluster)

                        [root@mseas-data2 gdata]# dd if=/gdata/zero1
                        of=/gdata/zero2

                        2048000+0 records in

                        2048000+0 records out

                        1048576000 bytes (1.0 GB) copied, 92.4904 s, 11.3
                          MB/s - realllyyy slooowww
                        again

                        
                        Copy from /home to /home (ext4 to ext4)

                        [root@mseas-data2 gdata]# dd if=/home/zero1
                        of=/home/zero2

                        2048000+0 records in

                        2048000+0 records out

                        1048576000 bytes (1.0 GB) copied, 3.53263 s, 297
                          MB/s 30 times as fast

                        
                        Copy from /home to /home (ext4 to ext4)

                        [root@mseas-data2 gdata]# dd if=/home/zero1
                        of=/home/zero3

                        2048000+0 records in

                        2048000+0 records out

                        1048576000 bytes (1.0 GB) copied, 4.1737 s, 251
                          MB/s - 30 times as fast

                          
                          As a test, can we copy data directly to the
                          xfs mountpoint (/mnt/brick1) and bypass
                          gluster?

                          
                          Any help you could give us would be
                          appreciated.

                          
                        Thanks

                      
                      -- 

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley                          Email:  phaley@xxxxxxx
Center for Ocean Engineering       Phone:  (617) 253-6824
Dept. of Mechanical Engineering    Fax:    (617) 253-8125
MIT, Room 5-213                    http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA  02139-4301

      
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
    
    
_______________________________________________

Gluster-users mailing list

Gluster-users@xxxxxxxxxxx

http://lists.gluster.org/mailman/listinfo/gluster-users


-- 
Pranith


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users