----- Original Message ----- > From: "tecforte jason" <tecforte.jason@xxxxxxxxx> > To: gluster-users@xxxxxxxxxxx > Sent: Friday, August 12, 2016 5:41:07 AM > Subject: Move brick to new Node ( Distributed - Replicated Mode ) > > Hi, > > If i have existing 2 nodes with Distributed - Replicated setup like below : > > gluster volume create test-volume replica 2 > node1:/exp1/brick1 node2:/exp2/brick2 > node1:/exp1/brick3 node2:/exp2/brick4 > node1:/exp1/brick5 node2:/exp2/brick6 > > And now i want to add another new node to the gluster and > node2:/exp2/brick2 replicated with the new brick node3"/exp3/brick7 > > with the condition cannot add brick to existing node 1 and node 2. What version of glusterfs are you using? If I understand correctly, the current volume configuration is as follows: node1:/exp1/brick1 node2:/exp2/brick2 (replica of each other) node1:/exp1/brick3 node2:/exp2/brick4 node1:/exp1/brick5 node2:/exp2/brick6 And you want to change it to: node2:/exp2/brick2 node3:/exp3/brick7 (replica of each other) node1:/exp1/brick3 node2:/exp2/brick4 node1:/exp1/brick5 node2:/exp2/brick6 You can do the following: gluster peer probe node 3 (run this from one of the nodes in your cluster) gluster v replace-brick <volname> node1:/exp1/brick1 node3:/exp3/brick7 commit force This should now make node2:/exp2/brick2 and node3:/exp3/brick7 as replica of each other. You might have to do some additional work for heal to be triggered based on the glusterfs version you are using. So do mention the gluster version being used. Let me know if my understanding of the requirement given was incorrect. Hope this helps. > > May i know how to do this ? > > Appreciate for the advice. > > Thanks > Jason > > _______________________________________________ > Gluster-users mailing list > Gluster-users@xxxxxxxxxxx > http://www.gluster.org/mailman/listinfo/gluster-users -- Thanks, Anuradha. _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
