|
Hi, A disperse volume was configured on servers with limited network bandwidth. Some of the read operations failed with error [2016-05-16 18:38:36.035559] E [MSGID: 122034] [ec-common.c:461:ec_child_select] 0-SDSStoragePool-disperse-2: Insufficient available childs for this request (have 1, need 2) [2016-05-16 18:38:36.035713] W [fuse-bridge.c:2213:fuse_readv_cbk] 0-glusterfs-fuse: 155121179: READ => -1 (Input/output error) For some read operations just the following error was logged but the I/O did not fail. [2016-05-16 18:42:45.401570] E [MSGID: 122034] [ec-common.c:461:ec_child_select] 0-SDSStoragePool-disperse-3: Insufficient available childs for this request (have 1, need 2) [2016-05-16 18:42:45.402054] W [MSGID: 122053] [ec-common.c:116:ec_check_status] 0-SDSStoragePool-disperse-3: Operation failed on some subvolumes (up=7, mask=6, remaining=0, good=6, bad=1) We are receiving corrupted data in the read operation when the error is logged but the read call did not return any error. Thanks and Regards, Ram ***************************Legal Disclaimer*************************** "This communication may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message by mistake, please advise the sender by reply email and delete the message. Thank you." ********************************************************************** |
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
