I have an array that was created with: gluster volume create ghome replica 3 transport tcp machine00:/.g/ghome machine01:/.g/ghome machine02:/.g/ghome gluster volume add-brick ghome machine04:/.g/ghome machine05:/.g/ghome machine06:/.g/ghome gluster volume add-brick ghome machine07:/.g/ghome machine08:/.g/ghome machine10:/.g/ghome machine04 died and isn't coming back. Luckily I have a machine09 that I moved the zfs disk set over to from machine04 and it came up just fine. The zfs disk set only moved /.g, no other files like /var, /etc, or /. The question is, what is the best way to replace machine04 with machine09? I don't want to destroy data and want to do it live. Thanks. I was reading: http://gluster.readthedocs.io/en/latest/Administrator%20Guide/Managing%20Volumes/ and found Replacing brick in Replicate/Distributed Replicate volumes, but it says: Please note that other variants of replace-brick command are not supported. and that example only has an unchanging machine name and I wasn't sure that was the same variant that is supported or a different variant that isn't supported. I think the right commands are steps 1 through 6 in the section under Replacing brick in Replicate/Distributed Replicate volumes, with step 6 being: # gluster volume replace-brick ghome machine04:/.g/ghome machine09:/.g/ghome commit force but I want to double check to ensure that's the right way to do it. machine09 is already in gluster peer status, and all other machines and bricks are up and operational. Since I have a replica 3 array, and 2 good copies of the data in question still, the array is up and operational. I'm using centos and ubuntu 14.04 and 16.04 with 3.7 (aka ppa:gluster/glusterfs-3.7 and http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/glusterfs-epel.repo). _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
