nfs-ganesha volume null errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Running CentOS Linux release 7.2.1511, glusterfs 3.7.8 (glusterfs-server-3.7.8-2.el7.x86_64), nfs-ganesha-gluster-2.3.0-1.el7.x86_64

1) Ensured the connectivity between gluster nodes by using PING
2) Disabled NetworkManager (Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; disabled)
3) Gluster 'gluster_shared_storage' is created by using (gluster volume set all cluster.enable-shared-storage enable), and are all mounted under /run/gluster/shared_storage, and nfs-ganesha directory is also created after the feature being enabled
4) Emtpy out /etc/ganesha/ganesha.conf (have tested ganesha running as a stand-alone NFS server)
5) Installed pacemaker, corosync, and resource-agents
6) Reset 'hacluster' system-user password to be the same:
        # pcs cluster auth -u hacluster mlw-fusion1 mlw-fusion2 mlw-fusion3
        Password:
        mlw-fusion2: Authorized
        mlw-fusion3: Authorized
        mlw-fusion1: Authorized
7) IPv6 is enabled - (IPV6INIT=yes in /etc/sysconfig/network-scripts/ifcfg-en*)
8) Started pcsd, and corosync
9) Created /var/lib/glusterd/nfs/secret.pem, and transfer to the other 2 nodes
        # ssh -i secret.pem root@mlw-fusion3 "echo helloworld"
        helloworld
9) Transfer the following ganesha-ha.conf to the other nodes in the cluster, but change the HA_VOL_SERVER value accordingly to mlw-fusion2, and mlw-fusion3

HA_NAME="ganesha-ha-01"
HA_VOL_SERVER="mlw-fusion1"
HA_CLUSTER_NODES="mlw-fusion1,mlw-fusion2,mlw-fusion3"
VIP_mlw_fusion1="192.168.30.201"
VIP_mlw_fusion2="192.168.30.202"
VIP_mlw_fusion3="192.168.30.203"

Question 1) As i am new to nfs-ganesha, pacemaker, corosync, i was mostly puzzled by the error message found in the 'etc-glusterfs-glusterd.vol.log'. It seems like it will show the below message regardless of what i have done to troubleshoot - So, what Volume does these error messages are referring to? Is that referring to the HA_VOL_NAME in the /usr/libexec/ganesha/ganesha-ha.sh? Do I need to change any of the 4 HA_* variables inside ganesha-ha.sh?
        HA_NUM_SERVERS=0
        HA_SERVERS=""
        HA_CONFDIR="/etc/ganesha"
        HA_VOL_NAME="gluster_shared_storage"
        HA_VOL_MNT="/run/gluster/shared_storage"

E [MSGID: 106123] [glusterd-syncop.c:1407:gd_commit_op_phase] 0-management: Commit of operation 'Volume (null)' failed on localhost : Failed to set up HA config for NFS-Ganesha. Please check the log file for details

Question 2) do I really have to start corosync before enabling nfs-ganesha?

Any help will be appreciated!!!
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux