Re: faied start the glusterd after reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If I run "reboot" on the a node,there are not .snap files on A node after reboot.
Does the snap file only appear after unexpect reboot?
Why its size is 0 byte?
In this situation ,is a right method to solve this problem removing the snap file?

thanks
xin

发自我的 iPhone

> 在 2016年2月25日,19:05,Atin Mukherjee <amukherj@xxxxxxxxxx> 写道:
> 
> + Rajesh , Avra
> 
>> On 02/25/2016 04:12 PM, songxin wrote:
>> Thanks for your reply.
>> 
>> Do I need check all files in /var/lib/glusterd/*? 
>> Must all files be same in A node and B node?
> Yes, they should be identical.
>> 
>> I found that the size of
>> file /var/lib/glusterd/snaps/.nfs0000000001722f4000000002 is 0 bytes
>> after A board reboot.
>> So glusterd can't restore by this snap file on A node.
>> Is it right?
> Yes, looks like that.
>> 
>> 
>> 
>> 
>> 
>> 
>> At 2016-02-25 18:25:50, "Atin Mukherjee" <amukherj@xxxxxxxxxx> wrote:
>>> I believe you and Abhishek are from the same group and sharing the
>>> common set up. Could you check the content of /var/lib/glusterd/* in
>>> board B (post reboot and before starting glusterd) matches with
>>> /var/lib/glusterd/* from board A?
>>> 
>>> ~Atin
>>> 
>>>> On 02/25/2016 03:48 PM, songxin wrote:
>>>> Hi,
>>>> I have a problem as below when I start the gluster after reboot a board.
>>>> 
>>>> precondition: 
>>>> I use two boards do this test.
>>>> The version of glusterfs is 3.7.6.
>>>> 
>>>> A board ip:128.224.162.255 
>>>> B board ip:128.224.95.140 
>>>> 
>>>> reproduce steps拢潞
>>>> 
>>>> 1.systemctl start glusterd (A board) 
>>>> 2.systemctl start glusterd (B board) 
>>>> 3.gluster peer probe 128.224.95.140 (A board) 
>>>> 4.gluster volume create gv0 replica 2 128.224.95.140:/tmp/brick1/gv0
>>>> 128.224.162.255:/data/brick/gv0 force (local board)
>>>> 5.gluster volume start gv0 (A board) 
>>>> 6.press the reset button on the A board.It is a develop board so it has
>>>> a reset button that is similar to reset button on pc (A board) 
>>>> 7.run command "systemctl start glusterd" after A board reboot. And
>>>> command failed because the file /var/lib/glusterd/snaps/.nfsxxxxxxxxx
>>>> (local board) .
>>>> Log is as below.
>>>> [2015-12-07 07:55:38.260084] E [MSGID: 101032]
>>>> [store.c:434:gf_store_handle_retrieve] 0-: Path corresponding to
>>>> /var/lib/glusterd/snaps/.nfs0000000001722f4000000002
>>>> [2015-12-07 07:55:38.260120] D [MSGID: 0]
>>>> [store.c:439:gf_store_handle_retrieve] 0-: Returning -1                
>>>> 
>>>> [2015-12-07 07:55:38.260152] E [MSGID: 106200]
>>>> [glusterd-store.c:3332:glusterd_store_update_snap] 0-management: snap
>>>> handle is NULL                                 
>>>> [2015-12-07 07:55:38.260180] E [MSGID: 106196]
>>>> [glusterd-store.c:3427:glusterd_store_retrieve_snap] 0-management:
>>>> Failed to update snapshot for .nfs0000000001722f40
>>>> [2015-12-07 07:55:38.260208] E [MSGID: 106043]
>>>> [glusterd-store.c:3589:glusterd_store_retrieve_snaps] 0-management:
>>>> Unable to restore snapshot: .nfs0000000001722f400
>>>> [2015-12-07 07:55:38.260241] D [MSGID: 0]
>>>> [glusterd-store.c:3607:glusterd_store_retrieve_snaps] 0-management:
>>>> Returning with -1                              
>>>> [2015-12-07 07:55:38.260268] D [MSGID: 0]
>>>> [glusterd-store.c:4339:glusterd_restore] 0-management: Returning -1    
>>>> 
>>>> [2015-12-07 07:55:38.260325] E [MSGID: 101019]
>>>> [xlator.c:428:xlator_init] 0-management: Initialization of volume
>>>> 'management' failed, review your volfile again    
>>>> [2015-12-07 07:55:38.260355] E [graph.c:322:glusterfs_graph_init]
>>>> 0-management: initializing translator failed                            
>>>> 
>>>> [2015-12-07 07:55:38.260374] E [graph.c:661:glusterfs_graph_activate]
>>>> 0-graph: init failed                                 
>>>> 
>>>> 8.rm /var/lib/glusterd/snaps/.nfsxxxxxxxxx (A board) 
>>>> 9..run command "systemctl start glusterd" and success. 
>>>> 10.at this point the peer status is Peer in Cluster (Connected) and all
>>>> process is online. 
>>>> 
>>>> If a node abnormal reset, must I remove
>>>> the  /var/lib/glusterd/snaps/.nfsxxxxxx before starting the glusterd?
>>>> 
>>>> I want to know if it is nomal.
>>>> 
>>>> Thanks,
>>>> Xin
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users@xxxxxxxxxxx
>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>> 
>> 
>> 
>> 
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux