Re: question about replicate volume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Before step 6, there are some files(a,b,c), that are created at step 5 , in the A brick when volume type is distribute.
Should the files(a,b,c) in A brick be move to another directory before step 6?
And move back, after step 6, when the volume type is changed to replicate?

Thanks,
Xin





在 2016-02-24 12:42:39,"Ravishankar N" <ravishankar@xxxxxxxxxx> 写道:
Hello,

On 02/24/2016 10:03 AM, songxin wrote:
Hi,
Thank you for answering my question. And I have another question to ask.
If there has been some file(c, d, e) in the B node brick before step 6 as below.And the file c is diffetent with file c created in A mount poin.

Any new brick that you add to a volume has to be empty. It must not contain data or be a brick that was  a part of another volume etc.
Hope that helps,
Ravi

1.gluster peer probe 128.224.162.255                                                                                   //run on A node
2.gluster volume create gv0 128.224.162.163:/data/brick/gv0 force                                     //run on A node
3.gluster volume start gv0                                                                                                     //run on A node
4.mount -t glusterfs 128.224.162.163:/gv0 gluster                                                                //run on A node
5.create some file(a,b,c) in directory gluster                                                                         //run on A node
6.gluster volume add-brick gv0 replica 2 128.224.162.255:/data/brick/gv0 force                  //run on A node
7. gluster volume heal gv0 info split-brain                                                                             //run on A node
8.gluster volume heal gv0 info fulll                                                                                        //run on A node
After step 7, should some split-brain entries be present?
After step 8, should all files (a,b,c,d,e) will be replicate in volume gv0?
If so, how the file c be replicated when the file c is different between A brick  and B brick?






 

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux