This is gluster 3.6.6. I've attempted to disable and re-enable quota's on the volume, but when I re-apply the quotas on each directory the same 'Used' value is present as before. Where is quotad getting its information from, and how can I clean up/regenerate that info? On Thu, Jan 21, 2016 at 10:07 AM, Steve Dainard <sdainard@xxxxxxxx> wrote: > I have a distributed volume with quota's enabled: > > Volume Name: storage > Type: Distribute > Volume ID: 26d355cb-c486-481f-ac16-e25390e73775 > Status: Started > Number of Bricks: 4 > Transport-type: tcp > Bricks: > Brick1: 10.0.231.50:/mnt/raid6-storage/storage > Brick2: 10.0.231.51:/mnt/raid6-storage/storage > Brick3: 10.0.231.52:/mnt/raid6-storage/storage > Brick4: 10.0.231.53:/mnt/raid6-storage/storage > Options Reconfigured: > performance.cache-size: 1GB > performance.readdir-ahead: on > features.quota: on > diagnostics.brick-log-level: WARNING > > Here is a partial list of quotas: > # /usr/sbin/gluster volume quota storage list > Path Hard-limit Soft-limit Used > Available Soft-limit exceeded? Hard-limit exceeded? > --------------------------------------------------------------------------------------------------------------------------- > ... > /projects-CanSISE 10.0TB 80% 11.9TB > 0Bytes Yes Yes > ... > > If I du on that location I do not get 11.9TB of space used (fuse mount point): > [root@storage projects-CanSISE]# du -hs > 9.5T . > > Can someone provide an explanation for how the quota mechanism tracks > disk usage? How often does the quota mechanism check its accuracy? And > how could it get so far off? > > Can I get gluster to rescan that location and update the quota usage? > > Thanks, > Steve _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
