Please paste some lines from log files where you see "Operation not
permitted" errors.
Were there any errors observed during step 3 as specified in
http://www.gluster.org/community/documentation/index.php/Upgrade_to_3.5
Some rows in status output are still in "Not Started", are there any
errors in /var/log/glusterfs/geo-replication/*.log in those nodes?
regards
Aravinda
On 11/10/2015 10:50 PM, Dietmar Putz wrote:
Hi all,
i need some help with a geo-replication issue...
recently i upgraded two 6-node distributed-replicated gluster from
ubuntu 12.04.5 lts to 14.04.3 lts resp. glusterfs 3.4.7 to 3.5.6
since then the geo-replication does not start syncing but remains as
shown in the 'status detail' output below for about 48h.
I followed the hints for upgrade with an existing geo-replication :
http://www.gluster.org/community/documentation/index.php/Upgrade_to_3.5
the master_gfid_file.txt was created and applied to the slave volume.
geo-replication was started with 'force' option.
in the gluster.log on the slave i can find thousands of lines with
messages like :
".../.gfid/1abb953b-aa9d-4fa3-9a72-415204057572 => -1 (Operation not
permitted)"
and no files are synced.
I'm not sure whats going on and since there are about 40TByte of data
already replicated by the old 3.4.7 setup I have some fear to try
around...
so i got some questions...maybe somebody can give me some hints...
1. as shown in the example below the trusted.gfid of the same file
differs in master and slave volume. as far as i understood the
upgrade-howto after applying the master_gfid_file.txt on the slave
they should be the same on master and slave...is that right ?
2. as shown in the config below the change_detector is 'xsync'.
Somewhere i red that xsync is used for the initial replication and is
changing to 'change_log' later on when the entire sync is done. should
i try to modify the change_detector to 'change_log', does it make
sense...?
any other idea which could help me to solve this problem....?
best regards
dietmar
[ 11:10:01 ] - root@gluster-ger-ber-09 ~ $glusterfs --version
glusterfs 3.5.6 built on Sep 16 2015 15:27:30
...
[ 11:11:37 ] - root@gluster-ger-ber-09 ~ $cat
/var/lib/glusterd/glusterd.info | grep operating-version
operating-version=30501
[ 10:55:35 ] - root@gluster-ger-ber-09 ~ $gluster volume
geo-replication ger-ber-01 ssh://gluster-wien-02::aut-wien-01 status
detail
MASTER NODE MASTER VOL MASTER BRICK
SLAVE STATUS CHECKPOINT
STATUS CRAWL STATUS FILES SYNCD FILES PENDING BYTES
PENDING DELETES PENDING FILES SKIPPED
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
gluster-ger-ber-09 ger-ber-01 /gluster-export
gluster-wien-05-int::aut-wien-01 Active N/A Hybrid Crawl 0
8191 0 0 0
gluster-ger-ber-11 ger-ber-01 /gluster-export
ssh://gluster-wien-02::aut-wien-01 Not Started N/A
N/A N/A N/A N/A N/A N/A
gluster-ger-ber-10 ger-ber-01 /gluster-export
ssh://gluster-wien-02::aut-wien-01 Not Started N/A
N/A N/A N/A N/A N/A N/A
gluster-ger-ber-12 ger-ber-01 /gluster-export
ssh://gluster-wien-02::aut-wien-01 Not Started N/A
N/A N/A N/A N/A N/A N/A
gluster-ger-ber-07 ger-ber-01 /gluster-export
ssh://gluster-wien-02::aut-wien-01 Not Started N/A
N/A N/A N/A N/A N/A N/A
gluster-ger-ber-08 ger-ber-01 /gluster-export
gluster-wien-04-int::aut-wien-01 Passive N/A N/A 0
0 0 0 0
[ 10:55:48 ] - root@gluster-ger-ber-09 ~ $
[ 10:56:56 ] - root@gluster-ger-ber-09 ~ $gluster volume
geo-replication ger-ber-01 ssh://gluster-wien-02::aut-wien-01 config
special_sync_mode: partial
state_socket_unencoded:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-02_aut-wien-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.socket
gluster_log_file:
/var/log/glusterfs/geo-replication/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.gluster.log
ssh_command: ssh -p 2503 -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i
/var/lib/glusterd/geo-replication/secret.pem
ignore_deletes: true
change_detector: xsync
ssh_command_tar: ssh -p 2503 -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i
/var/lib/glusterd/geo-replication/tar_ssh.pem
working_dir:
/var/run/gluster/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01
remote_gsyncd: /nonexistent/gsyncd
log_file:
/var/log/glusterfs/geo-replication/ger-ber-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.log
socketdir: /var/run
state_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-02_aut-wien-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.status
state_detail_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-02_aut-wien-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01-detail.status
session_owner: 6a071cfa-b150-4f0b-b1ed-96ab5d4bd671
gluster_command_dir: /usr/sbin/
pid_file:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-02_aut-wien-01/ssh%3A%2F%2Froot%4082.199.131.2%3Agluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.pid
georep_session_working_dir:
/var/lib/glusterd/geo-replication/ger-ber-01_gluster-wien-02_aut-wien-01/
gluster_params: aux-gfid-mount
volume_id: 6a071cfa-b150-4f0b-b1ed-96ab5d4bd671
[ 11:10:01 ] - root@gluster-ger-ber-09 ~ $
[ 12:45:34 ] - root@gluster-wien-05
/var/log/glusterfs/geo-replication-slaves $tail -f
6a071cfa-b150-4f0b-b1ed-96ab5d4bd671\:gluster%3A%2F%2F127.0.0.1%3Aaut-wien-01.gluster.log
[2015-11-10 12:59:16.097932] W [fuse-bridge.c:1942:fuse_create_cbk]
0-glusterfs-fuse: 54267: /.gfid/1abb953b-aa9d-4fa3-9a72-415204057572
=> -1 (Operation not permitted)
[2015-11-10 12:59:16.098044] W [defaults.c:1381:default_release]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.5.6/xlator/mount/fuse.so(+0xfb4d)
[0x7fc9cd104b4d]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.5.6/xlator/mount/fuse.so(free_fuse_state+0x85)
[0x7fc9cd0fab95]
(-->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(fd_unref+0x10e)
[0x7fc9cf52ec9e]))) 0-fuse: xlator does not implement release_cbk
...
grep 1abb953b-aa9d-4fa3-9a72-415204057572 master_gfid_file.txt
1abb953b-aa9d-4fa3-9a72-415204057572 1050/hyve/364/14158.mp4
putz@sdn-de-gate-01:~/central$ ./mycommand.sh -H
gluster-ger,gluster-wien -c "getfattr -m . -d -e hex
/gluster-export/1050/hyve/364/14158.mp4"
...
master volume :
-----------------------------------------------------
Host : gluster-ger-ber-09-int
# file: gluster-export/1050/hyve/364/14158.mp4
trusted.afr.ger-ber-01-client-6=0x000000000000000000000000
trusted.afr.ger-ber-01-client-7=0x000000000000000000000000
trusted.gfid=0x1abb953baa9d4fa39a72415204057572
trusted.glusterfs.6a071cfa-b150-4f0b-b1ed-96ab5d4bd671.xtime=0x54bff5c40008dd7f
-----------------------------------------------------
Host : gluster-ger-ber-10-int
# file: gluster-export/1050/hyve/364/14158.mp4
trusted.afr.ger-ber-01-client-6=0x000000000000000000000000
trusted.afr.ger-ber-01-client-7=0x000000000000000000000000
trusted.gfid=0x1abb953baa9d4fa39a72415204057572
trusted.glusterfs.6a071cfa-b150-4f0b-b1ed-96ab5d4bd671.xtime=0x54bff5c40008dd7f
...
slave volume :
Host : gluster-wien-04
# file: gluster-export/1050/hyve/364/14158.mp4
trusted.afr.aut-wien-01-client-2=0x000000000000000000000000
trusted.afr.aut-wien-01-client-3=0x000000000000000000000000
trusted.gfid=0x129ba62c3d214b34beb366fb1e2c8e4b
trusted.glusterfs.6a071cfa-b150-4f0b-b1ed-96ab5d4bd671.xtime=0x54bff5c40008dd7f
-----------------------------------------------------
Host : gluster-wien-05
# file: gluster-export/1050/hyve/364/14158.mp4
trusted.afr.aut-wien-01-client-2=0x000000000000000000000000
trusted.afr.aut-wien-01-client-3=0x000000000000000000000000
trusted.gfid=0x129ba62c3d214b34beb366fb1e2c8e4b
trusted.glusterfs.6a071cfa-b150-4f0b-b1ed-96ab5d4bd671.xtime=0x54bff5c40008dd7f
-----------------------------------------------------
...
putz@sdn-de-gate-01:~/central$
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
