Here output from systemd-analyze critical-chain and systemd-analyze blame.
I think that now glusterd start too early (before networking)
[root@ovirt01 tmp]# systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@"
character.
The time the unit takes to start is printed after the "+" character.
multi-user.target @17.148s
└─ovirt-ha-agent.service @17.021s +127ms
└─vdsmd.service @15.871s +1.148s
└─vdsm-network.service @11.495s +4.373s
└─libvirtd.service @11.238s +254ms
└─iscsid.service @11.228s +8ms
└─network.target @11.226s
└─network.service @6.748s +4.476s
└─iptables.service @6.630s +117ms
└─basic.target @6.629s
└─paths.target @6.629s
└─brandbot.path @6.629s
└─sysinit.target @6.615s
└─systemd-update-utmp.service @6.610s +4ms
└─auditd.service @6.450s +157ms
└─systemd-tmpfiles-setup.service @6.369s +77ms
└─rhel-import-state.service @6.277s +88ms
└─local-fs.target @6.275s
└─home-glusterfs-data.mount @5.805s
+470ms
└─home.mount @3.946s +1.836s
└─systemd-fsck@dev-mapper-centos_ovirt01\x2dhome.service @3.937s +7ms
└─dev-mapper-centos_ovirt01\x2dhome.device @3.936s
[root@ovirt01 tmp]# systemd-analyze blame
4.476s network.service
4.373s vdsm-network.service
2.318s glusterd.service
2.076s postfix.service
1.836s home.mount
1.651s lvm2-monitor.service
1.258s lvm2-pvscan@9:1.service
1.211s systemd-udev-settle.service
1.148s vdsmd.service
1.079s dmraid-activation.service
1.046s boot.mount
904ms kdump.service
779ms multipathd.service
657ms var-lib-nfs-rpc_pipefs.mount
590ms
systemd-fsck@dev-disk-by\x2duuid-e185849f\x2d2c82\x2d4eb2\x2da215\x2d97340e90c93e.service
547ms tuned.service
481ms kmod-static-nodes.service
470ms home-glusterfs-data.mount
427ms home-glusterfs-engine.mount
422ms sys-kernel-debug.mount
411ms dev-hugepages.mount
411ms dev-mqueue.mount
278ms systemd-fsck-root.service
263ms systemd-readahead-replay.service
254ms libvirtd.service
243ms systemd-tmpfiles-setup-dev.service
216ms systemd-modules-load.service
209ms rhel-readonly.service
195ms wdmd.service
192ms sanlock.service
191ms gssproxy.service
186ms systemd-udev-trigger.service
157ms auditd.service
151ms plymouth-quit-wait.service
151ms plymouth-quit.service
132ms proc-fs-nfsd.mount
127ms ovirt-ha-agent.service
117ms iptables.service
110ms ovirt-ha-broker.service
96ms avahi-daemon.service
89ms systemd-udevd.service
88ms rhel-import-state.service
77ms systemd-tmpfiles-setup.service
71ms sysstat.service
71ms microcode.service
71ms chronyd.service
69ms systemd-readahead-collect.service
68ms systemd-sysctl.service
65ms systemd-logind.service
61ms rsyslog.service
58ms systemd-remount-fs.service
46ms rpcbind.service
46ms nfs-config.service
45ms systemd-tmpfiles-clean.service
41ms rhel-dmesg.service
37ms dev-mapper-centos_ovirt01\x2dswap.swap
29ms systemd-vconsole-setup.service
26ms plymouth-read-write.service
26ms systemd-random-seed.service
24ms netcf-transaction.service
22ms mdmonitor.service
20ms systemd-machined.service
14ms plymouth-start.service
12ms systemd-update-utmp-runlevel.service
11ms
systemd-fsck@dev-mapper-centos_ovirt01\x2dglusterOVEngine.service
8ms iscsid.service
7ms systemd-fsck@dev-mapper-centos_ovirt01\x2dhome.service
7ms systemd-readahead-done.service
7ms
systemd-fsck@dev-mapper-centos_ovirt01\x2dglusterOVData.service
6ms sys-fs-fuse-connections.mount
4ms systemd-update-utmp.service
4ms glusterfsd.service
4ms rpc-statd-notify.service
3ms iscsi-shutdown.service
3ms systemd-journal-flush.service
2ms sys-kernel-config.mount
1ms systemd-user-sessions.service
Il 06/11/2015 9.27, Stefano Danzi ha scritto:
Hi!
I have only one node (Test system) and I don't chage any ip address
and the entry is on /etc/hosts.
I think that now gluster start before networking
Il 06/11/2015 6.32, Atin Mukherjee ha scritto:
[glusterd-store.c:4243:glusterd_resolve_all_bricks] 0-glusterd:
resolve brick failed in restore
The above log is the culprit here. Generally this function fails when
GlusterD fails to resolve the associated host of a brick. Has any of the
node undergone an IP change during the upgrade process?
~Atin
On 11/06/2015 09:59 AM, Sahina Bose wrote:
Did you upgrade all the nodes too?
Are some of your nodes not-reachable?
Adding gluster-users for glusterd error.
On 11/06/2015 12:00 AM, Stefano Danzi wrote:
After upgrading oVirt from 3.5 to 3.6, glusterd fail to start when the
host boot.
Manual start of service after boot works fine.
gluster log:
[2015-11-04 13:37:55.360876] I [MSGID: 100030]
[glusterfsd.c:2318:main] 0-/usr/sbin/glusterd: Started running
/usr/sbin/glusterd version 3.7.5 (args: /usr/sbin/glusterd -p
/var/run/glusterd.pid)
[2015-11-04 13:37:55.447413] I [MSGID: 106478] [glusterd.c:1350:init]
0-management: Maximum allowed open file descriptors set to 65536
[2015-11-04 13:37:55.447477] I [MSGID: 106479] [glusterd.c:1399:init]
0-management: Using /var/lib/glusterd as working directory
[2015-11-04 13:37:55.464540] W [MSGID: 103071]
[rdma.c:4592:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event
channel creation failed [Nessun device corrisponde]
[2015-11-04 13:37:55.464559] W [MSGID: 103055] [rdma.c:4899:init]
0-rdma.management: Failed to initialize IB Device
[2015-11-04 13:37:55.464566] W
[rpc-transport.c:359:rpc_transport_load] 0-rpc-transport: 'rdma'
initialization failed
[2015-11-04 13:37:55.464616] W [rpcsvc.c:1597:rpcsvc_transport_create]
0-rpc-service: cannot create listener, initing the transport failed
[2015-11-04 13:37:55.464624] E [MSGID: 106243] [glusterd.c:1623:init]
0-management: creation of 1 listeners failed, continuing with
succeeded transport
[2015-11-04 13:37:57.663862] I [MSGID: 106513]
[glusterd-store.c:2036:glusterd_restore_op_version] 0-glusterd:
retrieved op-version: 30600
[2015-11-04 13:37:58.284522] I [MSGID: 106194]
[glusterd-store.c:3465:glusterd_store_retrieve_missed_snaps_list]
0-management: No missed snaps list.
[2015-11-04 13:37:58.287477] E [MSGID: 106187]
[glusterd-store.c:4243:glusterd_resolve_all_bricks] 0-glusterd:
resolve brick failed in restore
[2015-11-04 13:37:58.287505] E [MSGID: 101019]
[xlator.c:428:xlator_init] 0-management: Initialization of volume
'management' failed, review your volfile again
[2015-11-04 13:37:58.287513] E [graph.c:322:glusterfs_graph_init]
0-management: initializing translator failed
[2015-11-04 13:37:58.287518] E [graph.c:661:glusterfs_graph_activate]
0-graph: init failed
[2015-11-04 13:37:58.287799] W [glusterfsd.c:1236:cleanup_and_exit]
(-->/usr/sbin/glusterd(glusterfs_volumes_init+0xfd) [0x7f29b876524d]
-->/usr/sbin/glusterd(glusterfs_process_volfp+0x126) [0x7f29b87650f6]
-->/usr/sbin/glusterd(cleanup_and_exit+0x69) [0x7f29b87646d9] ) 0-:
received signum (0), shutting down
_______________________________________________
Users mailing list
Users@xxxxxxxxx
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
