gluster peer probe <node ip>
-Atin
Sent from one plus one
Hi,
How do i add a ’dummy’ node ?
thanks,
Peter
Fra: gluster-users-bounces@xxxxxxxxxxx [mailto:gluster-users-bounces@xxxxxxxxxxx] På vegne af Atin Mukherjee
Sendt: 30. oktober 2015 13:14
Til: Mauro Mozzarelli
Cc: gluster-users@xxxxxxxxxxx
Emne: Re: How-to start gluster when only one node is up ?
-Atin
Sent from one plus one
On Oct 30, 2015 5:28 PM, "Mauro Mozzarelli" <mauro@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> Atin keeps giving the same answer: "it is by design"
>
> I keep saying "the design is wrong and it should be changed to cater for
> standby servers"
Every design has got its own set of limitations and i would say this is a limitation instead of mentioning the overall design itself wrong. I would again stand with my points as correctness is always a priority in a distributed system. This behavioural change was introduced in 3.5 and if this was not included as part of release note I apologize on behalf of the release management.
As communicated earlier, we will definitely resolve this issue in GlusterD2.
>
> In the meantime this is the workaround I am using:
> When the single node starts I stop and start the volume, and then it
> becomes mountable. On CentOS 6 and CentOS 7 it works with release up to
> 3.7.4. Release 3.7.5 is broken so I reverted back to 3.7.4.
This is where I am not convinced. An explicit volume start should start the bricks, can you raise a BZ with all the relevant details?
>
> In my experience glusterfs releases are a bit of a hit and miss. Often
> something stops working with newer releases, then after a few more
> releases it works again or there is a workaround ... Not quite the
> stability one would want for commercial use, and thus at the moment I can
> risk using it only for my home servers, hence the cluster with a node
> always ON and the second as STANDBY.
>
> MOUNT=/home
> LABEL="GlusterFS:"
> if grep -qs $MOUNT /proc/mounts; then
> echo "$LABEL $MOUNT is mounted";
> gluster volume start gv_home 2>/dev/null
> else
> echo "$LABEL $MOUNT is NOT mounted";
> echo "$LABEL Restarting gluster volume ..."
> yes|gluster volume stop gv_home > /dev/null
> gluster volume start gv_home
> mount -t glusterfs sirius-ib:/gv_home $MOUNT;
> if grep -qs $MOUNT /proc/mounts; then
> echo "$LABEL $MOUNT is mounted";
> gluster volume start gv_home 2>/dev/null
> else
> echo "$LABEL failure to mount $MOUNT";
> fi
> fi
>
> I hope this helps.
> Mauro
>
> On Fri, October 30, 2015 11:48, Atin Mukherjee wrote:
> > -Atin
> > Sent from one plus one
> > On Oct 30, 2015 4:35 PM, "Remi Serrano" <rserrano@xxxxxxxx> wrote:
> >>
> >> Hello,
> >>
> >>
> >>
> >> I setup a gluster file cluster with 2 nodes. It works fine.
> >>
> >> But, when I shut down the 2 nodes, and startup only one node, I cannot
> > mount the share :
> >>
> >>
> >>
> >> [root@xxx ~]# mount -t glusterfs 10.32.0.11:/gv0 /glusterLocalShare
> >>
> >> Mount failed. Please check the log file for more details.
> >>
> >>
> >>
> >> Log says :
> >>
> >> [2015-10-30 10:33:26.147003] I [MSGID: 100030] [glusterfsd.c:2318:main]
> > 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.7.5
> > (args: /usr/sbin/glusterfs -127.0.0.1 --volfile-id=/gv0
> > /glusterLocalShare)
> >>
> >> [2015-10-30 10:33:26.171964] I [MSGID: 101190]
> > [event-epoll.c:632:event_dispatch_epoll_worker] 0-epoll: Started thread
> > with index 1
> >>
> >> [2015-10-30 10:33:26.185685] I [MSGID: 101190]
> > [event-epoll.c:632:event_dispatch_epoll_worker] 0-epoll: Started thread
> > with index 2
> >>
> >> [2015-10-30 10:33:26.186972] I [MSGID: 114020] [client.c:2118:notify]
> > 0-gv0-client-0: parent translators are ready, attempting connect on
> > transport
> >>
> >> [2015-10-30 10:33:26.191823] I [MSGID: 114020] [client.c:2118:notify]
> > 0-gv0-client-1: parent translators are ready, attempting connect on
> > transport
> >>
> >> [2015-10-30 10:33:26.192209] E [MSGID: 114058]
> > [client-handshake.c:1524:client_query_portmap_cbk] 0-gv0-client-0: failed
> > to get the port number for remote subvolume. Please ume status' on server
> > to see if brick process is running.
> >>
> >> [2015-10-30 10:33:26.192339] I [MSGID: 114018]
> > [client.c:2042:client_rpc_notify] 0-gv0-client-0: disconnected from
> > gv0-client-0. Client process will keep trying to connect t brick's port is
> > available
> >>
> >>
> >>
> >> And when I check the volumes I get:
> >>
> >> [root@xxx ~]# gluster volume status
> >>
> >> Status of volume: gv0
> >>
> >> Gluster process TCP Port RDMA Port Online
> > Pid
> >>
> >>
> > ------------------------------------------------------------------------------
> >>
> >> Brick 10.32.0.11:/glusterBrick1/gv0 N/A N/A N
> > N/A
> >>
> >> NFS Server on localhost N/A N/A N
> > N/A
> >>
> >> NFS Server on localhost N/A N/A N
> > N/A
> >>
> >>
> >>
> >> Task Status of Volume gv0
> >>
> >>
> > ------------------------------------------------------------------------------
> >>
> >> There are no active volume tasks
> >>
> >>
> >>
> >> If I start th second node, all is OK.
> >>
> >>
> >>
> >> Is this normal ?
> > This behaviour is by design. In a multi node cluster when GlusterD comes
> > up
> > it doesn't start the bricks until it receives the configuration from its
> > one of the friends to ensure that stale information is not been referred.
> > In your case since the other node is down bricks are not started and hence
> > mount fails.
> > As a workaround, we recommend to add a dummy node to the cluster to avoid
> > this issue.
> >>
> >>
> >>
> >> Regards,
> >>
> >>
> >>
> >> Rémi
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Gluster-users mailing list
> >> Gluster-users@xxxxxxxxxxx
> >> http://www.gluster.org/mailman/listinfo/gluster-users
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users@xxxxxxxxxxx
> > http://www.gluster.org/mailman/listinfo/gluster-users
>
>
> --
> Mauro Mozzarelli
> Phone: +44 7941 727378
> eMail: mauro@xxxxxxxxxxxx
>
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
