Re: Gluster-Nagios

Ramesh Nachimuthu <rnachimu@xxxxxxxxxx> · Fri, 9 Oct 2015 14:05:17 +0530



    On 10/09/2015 11:44 AM, Punit Dambiwal
      wrote:

    
      Hi Sahina,
        

        I have done the same but still the same result...
        

    Please update the nrpe package at the storage nodes and
    nagios-plugins-nrpe at the nagios server side with the new build and
    restart nrpe service on all the nodes. Also run /usr/lib64/nagios/plugins/check_nrpe
      -H <host-address> to check basic nrpe checks are
    working.

    
    Regards,

    Ramesh

    
        On Fri, Oct 9, 2015 at 12:23 PM, Sahina
          Bose <sabose@xxxxxxxxxx>
          wrote:

          
             You can update the
              packages with the ones built from source.

              You will need to update both the client and server nrpe
              packages with the modified payload limit to resolve this

              - nagios-plugins-nrpe

              - nrpe

              
              Have you done that?
              
                
                  On 10/09/2015 07:17 AM, Punit Dambiwal wrote:

                  
                    Hi Ramesh,
                      

                      Even after recompile nrpe with increased
                        value still the same issue...
                      

                      Thanks,
                      Punit
                    
                    
                      On Fri, Oct 9, 2015 at
                        9:21 AM, Punit Dambiwal <hypunit@xxxxxxxxx>
                        wrote:

                        
                          Hi Ramesh,
                            

                            Thanks for the update...as i have
                              install nagios and nrpe via yum,should i
                              need to remove nrpe and reinstall through
                              source package ??
                            

                            Thanks,
                            Punit
                          
                          
                                On Thu, Oct 8,
                                  2015 at 6:49 PM, Ramesh Nachimuthu <rnachimu@xxxxxxxxxx>
                                  wrote:

                                  
                                     Looks like you
                                      are hitting the NRPE Payload
                                      issue. Standard NRPE packages from
                                      epel/fedora has 1024 bytes payload
                                      limit. We have to increment this
                                      to 8192 to fix this. You can see
                                      more info at http://serverfault.com/questions/613288/truncating-return-data-as-it-is-bigger-then-nrpe-allows.
                                      

                                      Let me know if u need any more
                                      info.

                                      
                                      Regards,

                                      Ramesh
                                      
                                        
                                          On 10/08/2015 02:48 PM,
                                            Punit Dambiwal wrote:

                                          
                                            Hi,
                                              

                                              I am getting the
                                                following error :- 
                                              

                                              ----------------
                                              
                                                [root@monitor-001
                                                  yum.repos.d]#
                                                  /usr/lib64/nagios/plugins/gluster/discovery.py
                                                  -c ssd -H stor1
                                                Traceback (most
                                                  recent call last):
                                                  File
                                                  "/usr/lib64/nagios/plugins/gluster/discovery.py",
                                                  line 510, in
                                                  <module>
                                                    clusterdata =
                                                  discoverCluster(args.hostip,
                                                  args.cluster,
                                                  args.timeout)
                                                  File
                                                  "/usr/lib64/nagios/plugins/gluster/discovery.py",
                                                  line 88, in
                                                  discoverCluster
                                                    componentlist =
                                                  discoverVolumes(hostip,
                                                  timeout)
                                                  File
                                                  "/usr/lib64/nagios/plugins/gluster/discovery.py",
                                                  line 56, in
                                                  discoverVolumes
                                                   
                                                  timeout=timeout)
                                                  File
                                                  "/usr/lib64/nagios/plugins/gluster/server_utils.py",
                                                  line 107, in
                                                  execNRPECommand
                                                    resultDict =
                                                  json.loads(outputStr)
                                                  File
                                                  "/usr/lib64/python2.6/json/__init__.py",
                                                  line 307, in loads
                                                    return
                                                  _default_decoder.decode(s)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 319, in decode
                                                    obj, end =
                                                  self.raw_decode(s,
                                                  idx=_w(s, 0).end())
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 336, in
                                                  raw_decode
                                                    obj, end =
                                                  self._scanner.iterscan(s,
                                                  **kw).next()
                                                  File
                                                  "/usr/lib64/python2.6/json/scanner.py",
                                                  line 55, in iterscan
                                                    rval, next_pos
                                                  = action(m, context)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 183, in
                                                  JSONObject
                                                    value, end =
                                                  iterscan(s, idx=end,
                                                  context=context).next()
                                                  File
                                                  "/usr/lib64/python2.6/json/scanner.py",
                                                  line 55, in iterscan
                                                    rval, next_pos
                                                  = action(m, context)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 183, in
                                                  JSONObject
                                                    value, end =
                                                  iterscan(s, idx=end,
                                                  context=context).next()
                                                  File
                                                  "/usr/lib64/python2.6/json/scanner.py",
                                                  line 55, in iterscan
                                                    rval, next_pos
                                                  = action(m, context)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 217, in JSONArray
                                                    value, end =
                                                  iterscan(s, idx=end,
                                                  context=context).next()
                                                  File
                                                  "/usr/lib64/python2.6/json/scanner.py",
                                                  line 55, in iterscan
                                                    rval, next_pos
                                                  = action(m, context)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 183, in
                                                  JSONObject
                                                    value, end =
                                                  iterscan(s, idx=end,
                                                  context=context).next()
                                                  File
                                                  "/usr/lib64/python2.6/json/scanner.py",
                                                  line 55, in iterscan
                                                    rval, next_pos
                                                  = action(m, context)
                                                  File
                                                  "/usr/lib64/python2.6/json/decoder.py",
                                                  line 155, in
                                                  JSONString
                                                    return
                                                  scanstring(match.string,
                                                  match.end(), encoding,
                                                  strict)
                                                ValueError:
                                                  ('Invalid control
                                                  character at: line 1
                                                  column 1023 (char
                                                  1023)', '{"ssd":
                                                  {"name": "ssd",
                                                  "disperseCount": "0",
                                                  "bricks":
                                                  [{"brickpath":
                                                  "/bricks/b/vol1",
                                                  "brickaddress":
                                                  "stor1", "hostUuid":
                                                  "5fcb5150-f0a5-4af8-b383-11fa5d3f82f0"},
                                                  {"brickpath":
                                                  "/bricks/b/vol1",
                                                  "brickaddress":
                                                  "stor2", "hostUuid":
                                                  "b78d42c1-6ad7-4044-b900-3ccfe915859f"},
                                                  {"brickpath":
                                                  "/bricks/b/vol1",
                                                  "brickaddress":
                                                  "stor3", "hostUuid":
                                                  "40500a9d-418d-4cc0-aec5-6efbfb3c24e5"},
                                                  {"brickpath":
                                                  "/bricks/b/vol1",
                                                  "brickaddress":
                                                  "stor4", "hostUuid":
                                                  "5886ef94-df5e-4845-a54c-0e01546d66ea"},
                                                  {"brickpath":
                                                  "/bricks/c/vol1",
                                                  "brickaddress":
                                                  "stor1", "hostUuid":
                                                  "5fcb5150-f0a5-4af8-b383-11fa5d3f82f0"},
                                                  {"brickpath":
                                                  "/bricks/c/vol1",
                                                  "brickaddress":
                                                  "stor2", "hostUuid":
                                                  "b78d42c1-6ad7-4044-b900-3ccfe915859f"},
                                                  {"brickpath":
                                                  "/bricks/c/vol1",
                                                  "brickaddress":
                                                  "stor3", "hostUuid":
                                                  "40500a9d-418d-4cc0-aec5-6efbfb3c24e5"},
                                                  {"brickpath":
                                                  "/bricks/c/vol1",
                                                  "brickaddress":
                                                  "stor4", "hostUuid":
                                                  "5886ef94-df5e-4845-a54c-0e01546d66ea"},
                                                  {"brickpath":
                                                  "/bricks/d/vol1",
                                                  "brickaddress":
                                                  "stor1", "hostUuid":
                                                  "5fcb5150-f0a5-4a\n')
                                                [root@monitor-001
                                                  yum.repos.d]#
                                              
                                              -------------------------
                                              

                                              --------------
                                              
                                                [root@monitor-001
                                                  yum.repos.d]#
                                                  /usr/lib64/nagios/plugins/check_nrpe
                                                  -H stor1 -c
                                                  discover_volume_list
                                                {"ssd": {"type":
                                                  "DISTRIBUTED_REPLICATE",
                                                  "name": "ssd"},
                                                  "lockvol": {"type":
                                                  "REPLICATE", "name":
                                                  "lockvol"}}
                                                [root@monitor-001
                                                  yum.repos.d]#
                                              
                                              --------------
                                              

                                              Please help me to
                                                solve this issue...
                                              

                                              Thanks,
                                              Punit
                                            
                                            
                                              On
                                                Fri, Oct 2, 2015 at
                                                12:15 AM, Sahina Bose <sabose@xxxxxxxxxx>
                                                wrote:

                                                
                                                    The gluster-nagios
                                                    packages have not
                                                    been tested on
                                                    Ubuntu

                                                    
                                                    Looking at the error
                                                    below, it looks like
                                                    the rpm has not
                                                    updated the nrpe.cfg
                                                    correctly. You may
                                                    need to edit the
                                                    spec file for the
                                                    config file paths on
                                                    Ubuntu and rebuild.
                                                    
                                                      
                                                        On
                                                          10/01/2015
                                                          05:45 PM,
                                                          Amudhan P
                                                          wrote:

                                                        
                                                          OSError: [Errno 2] No such file or directory is
                                                          now sorted out
                                                          by by changing NRPE_PATH  in "constants.py".
                                                          

                                                          now

                                                          if i run
                                                          discovery.py
                                                          
                                                          
                                                          testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$


                                                          sudo python
                                                          discovery.py
                                                          -c vm-gfs -H
                                                          192.168.1.11
                                                          Failed

                                                          to execute
                                                          NRPE command
                                                          'discover_volume_list'
                                                          in host
                                                          '192.168.1.11'
                                                          Error

                                                          : NRPE:
                                                          Command
                                                          'discover_volume_list'
                                                          not defined
                                                          Make

                                                          sure NRPE
                                                          server in host
                                                          '192.168.1.11'
                                                          is configured
                                                          to accept
                                                          requests from
                                                          Nagios server
                                                          

                                                          testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$


                                                          /usr/lib/nagios/plugins/check_nrpe

                                                          -H
                                                          192.168.1.11
                                                          -c
                                                          discover_volume_list
                                                          NRPE:


                                                          Command
                                                          'discover_volume_list'
                                                          not defined
                                                          

                                                          My

                                                          client is
                                                          responding to
                                                          other nrpe
                                                          command.
                                                          
                                                          testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$


                                                          /usr/lib/nagios/plugins/check_nrpe

                                                          -H
                                                          192.168.1.11
                                                          -c check_load
                                                          OK

                                                          - load
                                                          average: 0.01,
                                                          0.03,
                                                          0.10|load1=0.010;15.000;30.000;0;
load5=0.030;10.000;25.000;0;
load15=0.100;5.000;20.000;0;
                                                          

                                                          On

                                                          Thu, Oct 1,
                                                          2015 at 5:20
                                                          PM, Sahina
                                                          Bose <sabose@xxxxxxxxxx>
                                                          wrote:

                                                          
                                                           Looks like a conflict in versions of python and
                                                          python-cpopen.
                                                          

                                                          Can you give
                                                          us the version
                                                          of these
                                                          packages?

                                                          
                                                          Also, what's
                                                          the output of
                                                          

                                                           /usr/lib64/nagios/plugins/check_nrpe

                                                          -H
                                                          192.168.1.11
                                                          -c
                                                          discover_volume_list
                                                          
                                                          
                                                          On
                                                          10/01/2015
                                                          04:10 PM,
                                                          Amudhan P
                                                          wrote:

                                                          
                                                          Hi,


                                                          I am
                                                          getting a
                                                          error when i
                                                          run
                                                          discovery.py.
                                                          

                                                          discovery.py

                                                          -c vm-gfs -H
                                                          192.168.1.11
                                                          

                                                          Traceback
                                                          (most recent
                                                          call last):
                                                            File
                                                          "discovery.py",
                                                          line 541, in
                                                          <module>
                                                             
                                                          clusterdata =
                                                          discoverCluster(args.hostip,


                                                          args.cluster,
                                                          args.timeout)
                                                            File
                                                          "discovery.py",
                                                          line 90, in
                                                          discoverCluster
                                                             
                                                          componentlist
                                                          =
                                                          discoverVolumes(hostip,
                                                          timeout)
                                                            File
                                                          "discovery.py",
                                                          line 53, in
                                                          discoverVolumes
                                                             
                                                          timeout=timeout)
                                                            File
                                                          "/usr/local/lib/nagios/plugins/gluster/server_utils.py",
                                                          line 114, in
                                                          execNRPECommand
                                                             
                                                          (returncode,
                                                          outputStr,
                                                          err) =
                                                          utils.execCmd(nrpeCmd,
                                                          raw=True)
                                                            File
                                                          "/usr/lib/python2.7/dist-packages/glusternagios/utils.py",
                                                          line 403, in
                                                          execCmd
                                                             
                                                          deathSignal=deathSignal,
childUmask=childUmask)
                                                            File
                                                          "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py",
                                                          line 63, in
                                                          __init__
                                                              **kw)
                                                            File
                                                          "/usr/lib/python2.7/subprocess.py",
                                                          line 710, in
                                                          __init__
                                                             
                                                          errread,
                                                          errwrite)
                                                            File
                                                          "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py",
                                                          line 82, in
                                                          _execute_child_v276
                                                             
                                                          restore_sigpipe=restore_sigpipe
                                                            File
                                                          "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py",
                                                          line 107, in
                                                          _execute_child_v275
                                                             
                                                          restore_sigpipe
                                                          OSError:
                                                          [Errno 2] No
                                                          such file or
                                                          directory
                                                          

                                                          Gluster
                                                          version :
                                                          3.7.4
                                                          OS :
                                                          Ubuntu 14.04
                                                          Complied
                                                          from source
                                                          tar file.

                                                          
                                                          regards
                                                          Amudhan
                                                          

                                                          On

                                                          Wed, Sep 30,
                                                          2015 at 6:21
                                                          PM, Humble
                                                          Devassy
                                                          Chirammal <humble.devassy@xxxxxxxxx>
                                                          wrote:

                                                          
                                                          The EL7
                                                          rpms of
                                                          gluster-nagios
                                                          are available
                                                          @ http://download.gluster.org/pub/gluster/glusterfs-nagios/1.1.0/

                                                          
                                                          Hope it helps!

                                                          
                                                          --Humble

                                                          
                                                          On


                                                          Tue, Sep 29,
                                                          2015 at 10:56
                                                          AM, Sahina
                                                          Bose <sabose@xxxxxxxxxx>
                                                          wrote:

                                                          
                                                           We will publish the EL7 builds soon.

                                                          
                                                          The source
                                                          tarballs are
                                                          now available
                                                          at - http://download.gluster.org/pub/gluster/glusterfs-nagios/

                                                          
                                                          thanks

                                                          sahina
                                                          
                                                          
                                                          On
                                                          09/25/2015
                                                          12:55 PM,
                                                          Humble Devassy
                                                          Chirammal
                                                          wrote:

                                                          
                                                          HI


                                                          Michael,

                                                          
                                                          Yes, only el6
                                                          packages are
                                                          available @ http://download.gluster.org/pub/gluster/glusterfs-nagios/
                                                          . I am looping
                                                          nagios project
                                                          team leads to
                                                          this thread.
                                                          Lets wait for
                                                          them to
                                                          revert.

                                                          
                                                          --Humble

                                                          
                                                          On


                                                          Sun, Sep 20,
                                                          2015 at 2:32
                                                          PM, Prof. Dr.
                                                          Michael
                                                          Schefczyk <michael@xxxxxxxxxxxxx>
                                                          wrote:

                                                          Dear


                                                          All,

                                                          
                                                          In June 2014,
                                                          the
                                                          gluster-nagios
                                                          team (thanks!)
                                                          published the
                                                          availability
                                                          of
                                                          gluster-nagios-common
                                                          and
                                                          gluster-nagios-addons
                                                          on this list.
                                                          As far as I
                                                          can tell, this
                                                          quite
                                                          extensive
                                                          gluster nagios
                                                          monitoring
                                                          tool is
                                                          available for
                                                          el6 only. Are
                                                          there known
                                                          plans to make
                                                          this available
                                                          for el7
                                                          outside the
                                                          RHEL-repos (http://ftp.redhat.de/pub/redhat/linux/enterprise/7Server/en/RHS/SRPMS/),


                                                          e.g. for use
                                                          with oVirt /
                                                          Centos 7 also?
                                                          It would be
                                                          good to be
                                                          able to
                                                          monitor
                                                          gluster
                                                          without
                                                          playing around
                                                          with scripts
                                                          from sources
                                                          other than a
                                                          rpm repo.

                                                          
                                                          Regards,

                                                          
                                                          Michael

_______________________________________________

                                                          Gluster-users
                                                          mailing list

                                                          Gluster-users@xxxxxxxxxxx

                                                          http://www.gluster.org/mailman/listinfo/gluster-users

                                                          
_______________________________________________

                                                          Gluster-users
                                                          mailing list

                                                          Gluster-users@xxxxxxxxxxx

                                                          http://www.gluster.org/mailman/listinfo/gluster-users

                                                          
_______________________________________________

                                                  Gluster-users mailing
                                                  list

                                                  Gluster-users@xxxxxxxxxxx

                                                  http://www.gluster.org/mailman/listinfo/gluster-users

                                                
                                            _______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
                                          
                                          
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users