So, I've done:
root@PSC01SERV008:/var/log# tail -f syslog | grep -Ev 'docker|kubelet|kube-proxy'
Sep 13 12:18:16 psc01serv008 systemd[1]: Stopped GlusterFS an clustered file-system server.
Sep 13 12:19:21 psc01serv008 systemd[1]: Reloading.
Sep 13 12:19:35 psc01serv008 systemd[1]: message repeated 3 times: [ Reloading.]
Sep 13 12:20:10 psc01serv008 systemd[1]: Starting GlusterFS an clustered file-system server...
Sep 13 12:20:12 psc01serv008 systemd[1]: Started GlusterFS an clustered file-system server.
and stopped glusterfs, it said it was stopped but processes where there, and I killed them manually, maybe something wrong with the system unit file, but it was working with 3.5, so don't know. Then I disabled my "homemade" glusterfs service and enabled /etc/init.d/glusterfs-server and it got the same problem, I could not restart the glusterfs processes from "init" doesn't matter what init file I try. root@PSC01SERV008:/var/log# tail -f syslog | grep -Ev 'docker|kubelet|kube-proxy'
Sep 13 12:18:16 psc01serv008 systemd[1]: Stopped GlusterFS an clustered file-system server.
Sep 13 12:19:21 psc01serv008 systemd[1]: Reloading.
Sep 13 12:19:35 psc01serv008 systemd[1]: message repeated 3 times: [ Reloading.]
Sep 13 12:20:10 psc01serv008 systemd[1]: Starting GlusterFS an clustered file-system server...
Sep 13 12:20:12 psc01serv008 systemd[1]: Started GlusterFS an clustered file-system server.
And when I kill processes by hands, it starts up but, as you can see there is no reports of any problems with starting up the NFS or any blocking port. There is no firewalld running on my host, and the problem is that I have 2 hosts identical to peer with, one is working and one is not.
dmesg is attached as well as my "handmade" glusterfs systemd service, just in case I start it wrongly.
2015-09-13 19:00 GMT+08:00 Soumya Koduri <skoduri@xxxxxxxxxx>:
On 09/13/2015 09:38 AM, Yaroslav Molochko wrote:
I wish this could be that simple:
root@PSC01SERV008:/var/lib# netstat -nap | grep 38465
root@PSC01SERV008:/var/lib# ss -n | grep 38465
root@PSC01SERV008:/var/lib#
2015-09-13 1:34 GMT+08:00 Atin Mukherjee <atin.mukherjee83@xxxxxxxxx
<mailto:atin.mukherjee83@xxxxxxxxx>>:
By any chance is your Gluster NFS server is already running? Output
of netstat -nap | grep 38465 might give some clue?
-Atin
Sent from one plus one
On Sep 12, 2015 10:54 PM, "Yaroslav Molochko" <onorua@xxxxxxxxx
<mailto:onorua@xxxxxxxxx>> wrote:
Hello,
I have a problem reported in logs:
==================
[2015-09-12 13:56:06.271644] I [MSGID: 100030]
[glusterfsd.c:2301:main] 0-/usr/sbin/glusterfs: Started running
/usr/sbin/glusterfs version 3.7.4 (args: /usr/sbin/glusterfs -s
localhost --volfile-id gluster/nfs -p
/var/lib/glusterd/nfs/run/nfs.pid -l /var/log/glusterfs/nfs.log
-S /var/run/gluster/cb186678589f28e74c67da70fd06e736.socket)
[2015-09-12 13:56:06.277921] I [MSGID: 101190]
[event-epoll.c:632:event_dispatch_epoll_worker] 0-epoll: Started
thread with index 1
[2015-09-12 13:56:07.284888] I
[rpcsvc.c:2215:rpcsvc_set_outstanding_rpc_limit] 0-rpc-service:
Configured rpc.outstanding-rpc-limit with value 16
[2015-09-12 13:56:07.292484] W [MSGID: 112153]
[mount3.c:3910:mnt3svc_init] 0-nfs-mount: Exports auth has been
disabled!
[2015-09-12 13:56:07.294357] E
[rpcsvc.c:1370:rpcsvc_program_register_portmap] 0-rpc-service:
Could not register with portmap 100005 3 38465
Port registration failed. Could you check '/var/log/messages' and dmesg to see if there are any errors logged? Is firewalld running on your system. Verify if the port is open to be used.
Thanks,
Soumya
Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>[2015-09-12 13:56:07.294398] E [MSGID: 112088]
[nfs.c:341:nfs_init_versions] 0-nfs: Required program MOUNT3
registration failed
[2015-09-12 13:56:07.294413] E [MSGID: 112109] [nfs.c:1482:init]
0-nfs: Failed to initialize protocols
[2015-09-12 13:56:07.294426] E [MSGID: 101019]
[xlator.c:428:xlator_init] 0-nfs-server: Initialization of
volume 'nfs-server' failed, review your volfile again
[2015-09-12 13:56:07.294438] E
[graph.c:322:glusterfs_graph_init] 0-nfs-server: initializing
translator failed
[2015-09-12 13:56:07.294448] E
[graph.c:661:glusterfs_graph_activate] 0-graph: init failed
[2015-09-12 13:56:07.294781] W
[glusterfsd.c:1219:cleanup_and_exit]
(-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x11a) [0x7fbe9c754b7a]
-->/usr/sbin/glusterfs(glusterfs_process_volfp+0x123)
[0x7fbe9c74fcb3] -->/usr/sbin/glusterfs(cleanup_and_exit+0x59)
[0x7fbe9c74f329] ) 0-: received signum (0), shutting down
===================
I've checked the page:
http://www.gluster.org/community/documentation/index.php/Gluster_3.1:_NFS_Frequently_Asked_Questions
I've found report in RedHat that it's necessary to remove -w
from rpcbind becuse some times it causes problems.
I did all that but still no luck on one of the servers, what is
interesting, the other server (peered) is working fine without
any problems.
root@PSC01SERV008:/var/lib/glusterd/nfs# systemctl status nfs
● nfs.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
root@PSC01SERV008:/var/lib/glusterd/nfs# systemctl status rpcbind
● rpcbind.service - RPC bind portmap service
Loaded: loaded (/etc/systemd/system/rpcbind.service;
enabled; vendor preset: enabled)
Drop-In: /run/systemd/generator/rpcbind.service.d
└─50-rpcbind-$portmap.conf
Active: active (running) since Sat 2015-09-12 13:55:07 UTC;
6min ago
Main PID: 9796 (rpcbind)
Memory: 428.0K
CGroup: /system.slice/rpcbind.service
└─9796 /sbin/rpcbind
Sep 12 13:55:07 PSC01SERV008 systemd[1]: Starting RPC bind
portmap service...
Sep 12 13:55:07 PSC01SERV008 systemd[1]: Started RPC bind
portmap service.
root@PSC01SERV008:/var/lib/glusterd/nfs# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
I've tried to reinstall it agaon and again - but there is no luck.
What I have:
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=15.04
DISTRIB_CODENAME=vivid
DISTRIB_DESCRIPTION="Ubuntu 15.04"
ii glusterfs-client
3.7.4-ubuntu1~vivid1 amd64 clustered
file-system (client package)
ii glusterfs-common
3.7.4-ubuntu1~vivid1 amd64 GlusterFS common
libraries and translator modules
ii glusterfs-server
3.7.4-ubuntu1~vivid1 amd64 clustered
file-system (server package)
What else can I check? How can I fix it, what is most important :)
Thanks in advance!
_______________________________________________
Gluster-users mailing list
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
Attachment:
dmesg.log
Description: Binary data
Attachment:
glusterfs.service
Description: Binary data
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
