It seems like your NFS kernel module is not disabled. Please try disabling it and re mount. Also nfs.disable option is set to off by default. You wouldn't need to set it explicitly.
-Atin
Sent from one plus one
On Aug 19, 2015 9:11 PM, "shacky" <shacky83@xxxxxxxxx> wrote:
Hi list!
I created a new volume with replica 3 on 3 nodes connected with a
gigabit network.
I know gigabit is not the best for a distributed file system, but I
cannot have a 10G networking at the moment.
I was experiencing very hard performance problem (write speed at
5MB/sec) so I want to try with NFS on Gluster.
I enabled NFS on the volume:
# gluster volume set data nfs.disable off
And restarted rpcbind:
# service rpcbind restart
Stopping rpcbind daemon....
Starting rpcbind daemon....
And checked that the port 111 is listening:
# netstat -na|grep 111
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 192.168.80.3:656 192.168.80.40:111 TIME_WAIT
tcp 0 0 192.168.80.3:748 192.168.80.40:111 TIME_WAIT
tcp 0 0 192.168.80.3:710 192.168.80.40:111 TIME_WAIT
tcp 0 0 192.168.80.3:814 192.168.80.40:111 TIME_WAIT
tcp 0 0 192.168.80.3:781 192.168.80.40:111 TIME_WAIT
tcp6 0 0 :::111 :::* LISTEN
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp6 0 0 :::111 :::*
But I cannot still mount the volume using NFS:
# mount -t nfs localhost:data /mnt/data2-nfs/
mount.nfs: Connection timed out
Could you help me please?
Thank you very much!
Bye
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
