On 08/16/2015 04:22 PM, Miloš Kozák
wrote:
Hi, I
have been running an glusterfs for a while, and everything works
just fine even after one node failure.. However, I went for brick
replacement due to my bricks were not thin-provisioned and I
wanted to use snapshots. In short, whole volume went down due to
heal daemon which tool all IO and all VMs running on top of that
volume started to be unresponsive.
In short, I am rebuilding the volume from scratch. I created new
thinly provisioned bricks:
lvs:
brick_s3-sata-10k vg_s3-sata-10k Vwi-aotz
931,25g s3-sata-10k_pool 2,95
s3-sata-10k_pool vg_s3-sata-10k twi-a-tz
931,25g
vgs:
vg_s3-sata-10k 1 3 0 wz--n- 931,51g 148,00m
df:
/dev/mapper/vg_s3--sata--10k-brick_s3--sata--10k 976009600
28383480 947626120 3% /gfs/s3-sata-10k
and mounted. When I uploaded two images onto it I found there
might be a problem. For the time being I run the volume in replica
2 mode on top of two servers. The files were copied from node1,
and I think the files are OK on node1 only. However, the volume
heal indicates everything is OK.
Hi,
If I understand you correctly, are you saying that when you created
a new replica 2 volume with thin LVs for the bricks , mounted the
volume (fuse?) and copied 2 files (VM images?) via this mount, the
files were being written to only node1?
-Ravi
My
symptoms are as follows:
df information from both servers:
/dev/mapper/vg_s3--sata--10k-brick_s3--sata--10k 976009600
30754296 945255304 4% /gfs/s3-sata-10k
/dev/mapper/vg_s3--sata--10k-brick_s3--sata--10k 976009600
28383480 947626120 3% /gfs/s3-sata-10k
[root@nodef01i ~]# du /gfs/s3-sata-10k/
0 /gfs/s3-sata-10k/fs/.glusterfs/indices/xattrop
0 /gfs/s3-sata-10k/fs/.glusterfs/indices
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs/htime
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs/csnap
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs
0 /gfs/s3-sata-10k/fs/.glusterfs/00/00
0 /gfs/s3-sata-10k/fs/.glusterfs/00
0 /gfs/s3-sata-10k/fs/.glusterfs/landfill
20480004 /gfs/s3-sata-10k/fs/.glusterfs/84/26
20480004 /gfs/s3-sata-10k/fs/.glusterfs/84
10240000 /gfs/s3-sata-10k/fs/.glusterfs/d0/ff
10240000 /gfs/s3-sata-10k/fs/.glusterfs/d0
30720008 /gfs/s3-sata-10k/fs/.glusterfs
30720008 /gfs/s3-sata-10k/fs
30720008 /gfs/s3-sata-10k/
[root@nodef02i ~]# du /gfs/s3-sata-10k/
0 /gfs/s3-sata-10k/fs/.glusterfs/indices/xattrop
0 /gfs/s3-sata-10k/fs/.glusterfs/indices
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs/htime
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs/csnap
0 /gfs/s3-sata-10k/fs/.glusterfs/changelogs
0 /gfs/s3-sata-10k/fs/.glusterfs/00/00
0 /gfs/s3-sata-10k/fs/.glusterfs/00
0 /gfs/s3-sata-10k/fs/.glusterfs/landfill
18727172 /gfs/s3-sata-10k/fs/.glusterfs/84/26
18727172 /gfs/s3-sata-10k/fs/.glusterfs/84
9622016 /gfs/s3-sata-10k/fs/.glusterfs/d0/ff
9622016 /gfs/s3-sata-10k/fs/.glusterfs/d0
28349192 /gfs/s3-sata-10k/fs/.glusterfs
28349192 /gfs/s3-sata-10k/fs
28349192 /gfs/s3-sata-10k/
[root@nodef01i ~]# du /gfs/s3-sata-10k/fs/*
20480004 /gfs/s3-sata-10k/fs/f1607f25aa52f4fb6f98f20ef0f3f9d7
10240000 /gfs/s3-sata-10k/fs/3706a2cb0bb27ba5787b3c12388f4ebb
[root@nodef02i ~]# du /gfs/s3-sata-10k/fs/*
18727172 /gfs/s3-sata-10k/fs/f1607f25aa52f4fb6f98f20ef0f3f9d7
9622016
/gfs/s3-sata-10k/fs/3706a2cb0bb27ba5787b3c12388f4ebb
[root@nodef01i ~]# ll /gfs/s3-sata-10k/fs/
celkem 30720004
-rw-r----- 2 oneadmin oneadmin 20971520512 3. srp 23.53
f1607f25aa52f4fb6f98f20ef0f3f9d7
-rw-r----- 2 oneadmin oneadmin 10485760000 16. srp 11.23
3706a2cb0bb27ba5787b3c12388f4ebb
[root@nodef02i ~]# ll /gfs/s3-sata-10k/fs/
celkem 28349188
-rw-r----- 2 oneadmin oneadmin 20971520512 3. srp 23.53
f1607f25aa52f4fb6f98f20ef0f3f9d7
-rw-r----- 2 oneadmin oneadmin 10485760000 16. srp 11.22
3706a2cb0bb27ba5787b3c12388f4ebb
[root@nodef01i ~]# gluster volume heal ph-fs-0 info split-brain
Gathering list of split brain entries on volume ph-fs-0 has been
successful
Brick 10.11.100.1:/gfs/s3-sata-10k/fs
Number of entries: 0
Brick 10.11.100.2:/gfs/s3-sata-10k/fs
Number of entries: 0
[root@nodef01i ~]# gluster volume heal ph-fs-0 info
Brick nodef01i.czprg:/gfs/s3-sata-10k/fs/
Number of entries: 0
Brick nodef02i.czprg:/gfs/s3-sata-10k/fs/
Number of entries: 0
[root@nodef01i ~]# gluster volume status
Status of volume: ph-fs-0
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick 10.11.100.1:/gfs/s3-sata-10k/fs 49152 Y
3733
Brick 10.11.100.2:/gfs/s3-sata-10k/fs 49152 Y
64711
NFS Server on localhost 2049 Y 3747
Self-heal Daemon on localhost N/A Y 3752
NFS Server on 10.11.100.2 2049 Y 64725
Self-heal Daemon on 10.11.100.2 N/A Y 64730
Task Status of Volume ph-fs-0
------------------------------------------------------------------------------
There are no active volume tasks
[root@nodef02i ~]# gluster volume status
Status of volume: ph-fs-0
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick 10.11.100.1:/gfs/s3-sata-10k/fs 49152 Y
3733
Brick 10.11.100.2:/gfs/s3-sata-10k/fs 49152 Y
64711
NFS Server on localhost 2049 Y 64725
Self-heal Daemon on localhost N/A Y 64730
NFS Server on 10.11.100.1 2049 Y 3747
Self-heal Daemon on 10.11.100.1 N/A Y 3752
Task Status of Volume ph-fs-0
------------------------------------------------------------------------------
There are no active volume tasks
[root@nodef02i ~]# rpm -qa | grep gluster
glusterfs-server-3.6.2-1.el6.x86_64
glusterfs-3.6.2-1.el6.x86_64
glusterfs-api-3.6.2-1.el6.x86_64
glusterfs-libs-3.6.2-1.el6.x86_64
glusterfs-cli-3.6.2-1.el6.x86_64
glusterfs-fuse-3.6.2-1.el6.x86_64
What other information should I provide?
Thanks Milos
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
|
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
