Hi Ravi,
I updated to gluster 3.6 via PPA and that seems to work well. I did a number of alternating reboots with ActiveMQ under load and
did not see any problem. From my rough measurements it seems we got a bit of a performance improvement as well, although I might be making that one up.
Cheers,
Peter
From: Ravishankar N [mailto:ravishankar@xxxxxxxxxx]
Sent: Wednesday, 5 August 2015 12:03 PM
To: Peter Becker; Gluster-users@xxxxxxxxxxx
Subject: Re: Split brain after rebooting half of a two-node cluster
On 08/05/2015 07:01 AM, Peter Becker wrote:
Hi Ravi,
Not easily: 3.2.5 is what comes with Ubuntu 12.04 and based on previous posts on this list it seems I can’t just go and compile a
newer one.
Hi Peter,
Would adding the PPA (https://launchpad.net/~gluster) not work? 3.5 seems to be available [1] for Ubuntu precise.
[1]
http://www.gluster.org/pipermail/gluster-users/2015-August/023058.html
If our setup should work and an upgrade might fix the issues we see, then we could try Ubuntu 14.04 – it’s not a supported environment
in our organisation yet, but we might be able to push that.
Given that it’s a bit involved: are there other venues we could try first?
Cheers,
Peter
On 08/05/2015 04:49 AM, Peter Becker wrote:
qmaster@srvamqpy01:~$ gluster --version
glusterfs 3.2.5 built on Jan 31 2012 07:39:59
FWIW, this is a rather old release. Can you see if the issue is recurring with glusterfs 3.7?
-Ravi
|
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
