Hi, Unfortunately, # gluster vol set usr_global changelog.changelog off volume set: failed: Staging failed on mvdcgluster01.us.alcatel-lucent.com. Error: One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again I don’t know really why, I have some clients using 3.6 as fuse client others are running on 3.5.2. Any advice ? -- Cyril Peponnet > On May 20, 2015, at 5:17 AM, Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx> wrote: > > Hi Cyril, > > From the brick logs, it seems the changelog-notifier thread has got killed for some reason, > as notify is failing with EPIPE. > > Try the following. It should probably help: > 1. Stop geo-replication. > 2. Disable changelog: gluster vol set <master-vol-name> changelog.changelog off > 3. Enable changelog: glluster vol set <master-vol-name> changelog.changelog on > 4. Start geo-replication. > > Let me know if it works. > > Thanks and Regards, > Kotresh H R > > ----- Original Message ----- >> From: "Cyril N PEPONNET (Cyril)" <cyril.peponnet@xxxxxxxxxxxxxxxxxx> >> To: "gluster-users" <gluster-users@xxxxxxxxxxx> >> Sent: Tuesday, May 19, 2015 3:16:22 AM >> Subject: Geo-Replication - Changelog socket is not present - Falling back to xsync >> >> Hi Gluster Community, >> >> I have a 3 nodes setup at location A and a two node setup at location B. >> >> All running 3.5.2 under Centos-7. >> >> I have one volume I sync through georeplication process. >> >> So far so good, the first step of geo-replication is done (hybrid-crawl). >> >> Now I’d like to use the change log detector in order to delete files on the >> slave when they are gone on master. >> >> But it always fallback to xsync mecanism (even when I force it using config >> changelog_detector changelog): >> >> [2015-05-18 12:29:49.543922] I [monitor(monitor):129:monitor] Monitor: >> ------------------------------------------------------------ >> [2015-05-18 12:29:49.544018] I [monitor(monitor):130:monitor] Monitor: >> starting gsyncd worker >> [2015-05-18 12:29:49.614002] I [gsyncd(/export/raid/vol):532:main_i] <top>: >> syncing: gluster://localhost:vol -> >> ssh://root@x.x.x.x:gluster://localhost:vol >> [2015-05-18 12:29:54.696532] I [master(/export/raid/vol):58:gmaster_builder] >> <top>: setting up xsync change detection mode >> [2015-05-18 12:29:54.696888] I [master(/export/raid/vol):357:__init__] >> _GMaster: using 'rsync' as the sync engine >> [2015-05-18 12:29:54.697930] I [master(/export/raid/vol):58:gmaster_builder] >> <top>: setting up changelog change detection mode >> [2015-05-18 12:29:54.698160] I [master(/export/raid/vol):357:__init__] >> _GMaster: using 'rsync' as the sync engine >> [2015-05-18 12:29:54.699239] I [master(/export/raid/vol):1104:register] >> _GMaster: xsync temp directory: >> /var/run/gluster/vol/ssh%3A%2F%2Froot%40x.x.x.x%3Agluster%3A%2F%2F127.0.0.1%3Avol/ce749a38ba30d4171cd674ec00ab24f9/xsync >> [2015-05-18 12:30:04.707216] I [master(/export/raid/vol):682:fallback_xsync] >> _GMaster: falling back to xsync mode >> [2015-05-18 12:30:04.742422] I [syncdutils(/export/raid/vol):192:finalize] >> <top>: exiting. >> [2015-05-18 12:30:05.708123] I [monitor(monitor):157:monitor] Monitor: >> worker(/export/raid/vol) died in startup phase >> [2015-05-18 12:30:05.708369] I [monitor(monitor):81:set_state] Monitor: new >> state: faulty >> [201 >> >> After some python debugging and stack strace printing I figure out that: >> >> /var/run/gluster/vol/ssh%3A%2F%2Froot%40x.x.x.x%3Agluster%3A%2F%2F127.0.0.1%3Avol/ce749a38ba30d4171cd674ec00ab24f9/changes.log >> >> [2015-05-18 19:41:24.511423] I >> [gf-changelog.c:179:gf_changelog_notification_init] 0-glusterfs: connecting >> to changelog socket: >> /var/run/gluster/changelog-ce749a38ba30d4171cd674ec00ab24f9.sock (brick: >> /export/raid/vol) >> [2015-05-18 19:41:24.511445] W >> [gf-changelog.c:189:gf_changelog_notification_init] 0-glusterfs: connection >> attempt 1/5... >> [2015-05-18 19:41:26.511556] W >> [gf-changelog.c:189:gf_changelog_notification_init] 0-glusterfs: connection >> attempt 2/5... >> [2015-05-18 19:41:28.511670] W >> [gf-changelog.c:189:gf_changelog_notification_init] 0-glusterfs: connection >> attempt 3/5... >> [2015-05-18 19:41:30.511790] W >> [gf-changelog.c:189:gf_changelog_notification_init] 0-glusterfs: connection >> attempt 4/5... >> [2015-05-18 19:41:32.511890] W >> [gf-changelog.c:189:gf_changelog_notification_init] 0-glusterfs: connection >> attempt 5/5... >> [2015-05-18 19:41:34.512016] E >> [gf-changelog.c:204:gf_changelog_notification_init] 0-glusterfs: could not >> connect to changelog socket! bailing out... >> >> >> /var/run/gluster/changelog-ce749a38ba30d4171cd674ec00ab24f9.sock doesn’t >> exist. So the >> https://github.com/gluster/glusterfs/blob/release-3.5/xlators/features/changelog/lib/src/gf-changelog.c#L431 >> is failing because >> https://github.com/gluster/glusterfs/blob/release-3.5/xlators/features/changelog/lib/src/gf-changelog.c#L153 >> cannot open the socket file. >> >> And I don’t find any error related to changelog in log files, except on brick >> logs node 2 (site A) >> >> bricks/export-raid-vol.log-20150517:[2015-05-14 17:06:52.636908] E >> [changelog-helpers.c:168:changelog_rollover_changelog] 0-vol-changelog: >> Failed to send file name to notify thread (reason: Broken pipe) >> bricks/export-raid-vol.log-20150517:[2015-05-14 17:06:52.636949] E >> [changelog-helpers.c:280:changelog_handle_change] 0-vol-changelog: Problem >> rolling over changelog(s) >> >> gluster vol status is all fine, and change-log options are enabled in vol >> file >> >> volume vol-changelog >> type features/changelog >> option changelog on >> option changelog-dir /export/raid/vol/.glusterfs/changelogs >> option changelog-brick /export/raid/vol >> subvolumes vol-posix >> end-volume >> >> Any help will be appreciated :) >> >> Oh Btw, hard to stop / restart the volume as I have around 4k clients >> connected. >> >> Thanks ! >> >> -- >> Cyril Peponnet >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users@xxxxxxxxxxx >> http://www.gluster.org/mailman/listinfo/gluster-users _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
