Aravinda, I wasn’t really referring to the SSH command itself but the error thrown by gsyncd.py: >> error: incorrect number of arguments >> >> Usage: gsyncd.py [options...] <master> <slave> The status is still like this: # gluster volume geo-replication gv0 v39-app-01::gv0 status MASTER NODE MASTER VOL MASTER BRICK SLAVE STATUS CHECKPOINT STATUS CRAWL STATUS ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- s35-06 gv0 /glusterfs/bricks/brick1/brick v39-app-05::gv0 Active N/A Changelog Crawl s35-07 gv0 /glusterfs/bricks/brick1/brick v39-app-02::gv0 Passive N/A N/A s35-08 gv0 /glusterfs/bricks/brick1/brick v39-app-01::gv0 Active N/A Changelog Crawl s35-09 gv0 /glusterfs/bricks/brick1/brick v39-app-04::gv0 Passive N/A N/A Met vriendelijke groet / kind regards, Sander Zijlstra | Linux Engineer | SURFsara | Science Park 140 | 1098XG Amsterdam | T +31 (0)6 43 99 12 47 | sander.zijlstra@xxxxxxxxxxx | www.surfsara.nl | Regular day off on friday > On 08 Apr 2015, at 05:39, Aravinda <avishwan@xxxxxxxxxx> wrote: > > I don't see any issue with ssh command here. Geo-rep will use this command as prefix and adds additional parameters while running. > > Please let us know the Current status and any errors in log files(/var/log/glusterfs/geo-replication/<MASTERVOL_SLAVEHOST_SLAVEVOL>/) > > -- > regards > Aravinda > > On 04/08/2015 12:18 AM, Sander Zijlstra wrote: >> LS, >> >> Last week I configured geo-replication between two glusterFS clusters, both version 3.6.2 and all looks ok: >> >> [root@s35-06 gv0]# gluster volume geo-replication gv0 status >> >> >> MASTER NODE MASTER VOL MASTER BRICK SLAVE STATUS CHECKPOINT STATUS CRAWL STATUS >> -------------------------------------------------------------------------------------------------------------------------------------- >> s35-06 gv0 /glusterfs/bricks/brick1/brick v39-app-05::gv0 Active N/A Changelog Crawl >> s35-07 gv0 /glusterfs/bricks/brick1/brick v39-app-02::gv0 Passive N/A N/A >> s35-09 gv0 /glusterfs/bricks/brick1/brick v39-app-04::gv0 Passive N/A N/A >> s35-08 gv0 /glusterfs/bricks/brick1/brick v39-app-01::gv0 Active N/A Changelog Crawl >> >> I started the replication at the end of the day, hoping that all 40TB would be copied by the next day or so, but I discovered that not a single bit has been copied. >> >> When looking at the volume config settings I found the “ssh command” used so I tried that and discovered the following issue between my master and slave cluster when executing the configured “ssh command" >> >> [root@s35-06 gv0]# ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem v39-app-01 >> [2015-04-07 14:43:43.613130] I [cli.c:593:cli_rpc_init] 0-cli: Connecting to remote glusterd at localhost >> [2015-04-07 14:43:43.613178] D [rpc-clnt.c:972:rpc_clnt_connection_init] 0-glusterfs: defaulting frame-timeout to 30mins >> [2015-04-07 14:43:43.613187] D [rpc-clnt.c:986:rpc_clnt_connection_init] 0-glusterfs: disable ping-timeout >> [2015-04-07 14:43:43.613202] D [rpc-transport.c:188:rpc_transport_load] 0-rpc-transport: missing 'option transport-type'. defaulting to "socket" >> [2015-04-07 14:43:43.613211] D [rpc-transport.c:262:rpc_transport_load] 0-rpc-transport: attempt to load file /usr/lib64/glusterfs/3.6.2/rpc-transport/socket.so >> [2015-04-07 14:43:43.615501] T [options.c:87:xlator_option_validate_int] 0-glusterfs: no range check required for 'option remote-port 24007' >> [2015-04-07 14:43:43.615528] D [socket.c:3799:socket_init] 0-glusterfs: SSL support on the I/O path is NOT enabled >> [2015-04-07 14:43:43.615537] D [socket.c:3802:socket_init] 0-glusterfs: SSL support for glusterd is NOT enabled >> [2015-04-07 14:43:43.615543] D [socket.c:3819:socket_init] 0-glusterfs: using system polling thread >> >> ——%<——— >> >> [2015-04-07 14:43:43.733052] I [cli-rpc-ops.c:5386:gf_cli_getwd_cbk] 0-cli: Received resp to getwd >> [2015-04-07 14:43:43.733085] D [cli-cmd.c:384:cli_cmd_submit] 0-cli: Returning 0 >> [2015-04-07 14:43:43.733097] D [cli-rpc-ops.c:5415:gf_cli_getwd] 0-cli: Returning 0 >> [2015-04-07 14:43:43.733104] I [input.c:36:cli_batch] 0-: Exiting with: 0 >> error: incorrect number of arguments >> >> Usage: gsyncd.py [options...] <master> <slave> >> >> Connection to v39-app-01 closed. >> >> Can somebody point me to how to fix this “gsycnd” issue? I didn’t find any updated packages from CentOS for my release (6.6), so I expect it should be a working setup. >> >> any help would appreciated >> >> Met vriendelijke groet / kind regards, >> >> *Sander Zijlstra* >> >> | Linux Engineer | SURFsara | Science Park 140 | 1098XG Amsterdam | T +31 (0)6 43 99 12 47 | sander.zijlstra@xxxxxxxxxxx <mailto:sander.zijlstra@xxxxxxxxxxx> | www.surfsara.nl <http://www.surfsara.nl> | >> >> /Regular day off on friday/ >> >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users@xxxxxxxxxxx >> http://www.gluster.org/mailman/listinfo/gluster-users >
Attachment:
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
