Hi,
I need to setup firewall rules and therefore need to know who wants to talk to whom. I found in the mailinglist:
"glusterd's management port is 24007/tcp (also 24008/tcp if you use rdma).
Bricks (glusterfsd) use 49152 & up since 3.4.0 (24009 & up previously).
(Deleted volumes do not reset this counter.) Additionally it will listen on
38465-38467/tcp for nfs, also 38468 for NLM since 3.3.0. NFS also depends
on rpcbind/portmap on port 111 and 2049 since 3.4"
But what ports are used by servers and what ports are used by clients?
I guess:
servers talk with servers on 24007 via tcp
servers talk with servers on 24008 via tcp
I need to setup firewall rules and therefore need to know who wants to talk to whom. I found in the mailinglist:
"glusterd's management port is 24007/tcp (also 24008/tcp if you use rdma).
Bricks (glusterfsd) use 49152 & up since 3.4.0 (24009 & up previously).
(Deleted volumes do not reset this counter.) Additionally it will listen on
38465-38467/tcp for nfs, also 38468 for NLM since 3.3.0. NFS also depends
on rpcbind/portmap on port 111 and 2049 since 3.4"
But what ports are used by servers and what ports are used by clients?
I guess:
servers talk with servers on 24007 via tcp
servers talk with servers on 24008 via tcp
servers talk with servers on 49152-xxx via tcp
clients talk with servers on 111 via tcp and udp
clients talk with servers on 2049 via tcp
I am unsure about:
clients talk with servers on 38465-38467 via tcp
clients talk with servers on 38468 via tcp
clients talk with servers on 38468 via tcp
Anything else I missed?
Michael
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users